New 600W LED Driver from Delta Electronics Meets IEC 61000-4-2 and IEC 61000-4-5
Can withstand 10kV common and differential mode surge immunity. Comes in 36V (LNE-36V600WBGA) and 48V (LNE-48V600WBGA) output voltages. Operating temperature ranging from -40°C to +70°C with convection cooling.
Read More »
New LED Swivel Floodlights from Bell are Used in Outdoor Wet Locations
Available in white, bronze and gray colors and in LL1200 and LL800 series. Offers equivalent light to a 75W incandescent lamp using 13W. Ideal for landscape, architectural or security lighting in residential, commercial and light industrial applications.
Read More »
Linear 2 ft Emergency LED Light Fixture has explosionproof design.
Configured to operate only during power outages, HAL-EMG-24-2L-LED-BMSW-113 weatherproof, UL-Listed,Ã- Class 1 Division 2 Group A/B/C/D hazardous area LED light comes with two 14Ã- W LED lamps producing 1,750 lm. Unit can be configured to run on 120–277 Vac as well as 12/24 Vdc, and integrated emergency ballast allows the unit to operateÃ- 2 LED lamps for 90 min once main electrical...
Read More »
The Evolution of Robot Based Deburring
This white paper provides an overview into the evolution of robot-based deburring.
Read More »
LED Fixtures feature intelligent lighting sensors, controls.
GrÃ-¼v 1.5 in.Ã- LED lighting fixtures useÃ- sensors with secure architecture that provide insight while helping achieve sustainability goals. Seamless cloud-based network collects, aggregates, and communicates detailed information wirelessly on building occupancy and performance, environmental conditions, ambient light levels, temperature, and energy consumption. Available at 5 or 10...
Read More »High-Power UVC LEDs disinfect water, air, and surfaces.
Targeting higher power applications for UVC disinfection of water, air, and surfaces,Ã- Klaran delivers germicidal output powers from 15–30 mW that are suited for healthcare, lab water, and consumer product applications. Footprint occupied by this non-hazardous, mercury-free solution affords design flexibility, while ruggednessÃ- of design supports mobile use.
Read More »Fast Body Diode MOSFETs are rated for voltages to 650 V.
Increasing voltage headroom for soft switching in industrial, telecom, and renewable energy applications, models SiHx21N65EF (21 A), SiHx28N65EF (28 A), and SiHG33N65EF (33 A)Ã- offer respective on-resistance down to 157, 102, and 95 mΩ. Reverse recovery charge (Qrr) allows devices to block full breakdown voltage to help avoid failure from shoot-through and thermal overstress as well as...
Read More »
Eaton's LED Luminaire Named an Edison Awards Winner
PEACHTREE CITY, Ga. – Power management company Eaton today announced that its Metalux™ SkyRidge™ light-emitting diode (LED) with Integrated Sensor Control System has been named a 2016 Bronze award winner by the internationally renowned Edison Awards™. The distinguished awards, inspired by Thomas Edison’s persistence and inventiveness, recognize innovation, creativity and ingenuity in...
Read More »Excelitas Technologies to Feature New UV LED Curing Solutions at RadTech UV+EB 2016
Mike Kay Presenting “Improving Surface Cure with UVC LEDs” WHO:Ã- Excelitas TechnologiesÃ-® Corp., a global technology leader focused on delivering innovative, customized photonic solutions, will highlight its new UV LED curing products at RadTech UV+EB 2016 (Booth # 713). WHAT:Ã- Excelitas’ solutions meet the lighting, detection, optics and other technology needs of OEMs across...
Read More »Northwire Announces LEMO Partner Receives i-NOVO Design Award and Tech Honors
HALO LED Connector wins i-NOVO Design category with NiCorAl second runner-up in Tech category OSCEOLA, WI.Ã- – Northwire, a LEMO Group Company and cable supplier offering integrated cable and connector assemblies, is proud to announce that its LEMO partner has been recognized for two i-NOVO award honors. A leading resource for design engineers and OEM’s, DirectIndustry’s i-NOVO Awards...
Read More »
ISO-Certified Plastic Injection Molding from Rodon
The Rodon Group is a proven leader in high-volume, close tolerance injection molding. We offer globally competitive, innovative manufacturing solutions for a broad range of industries. Check out our video to learn more.
Read More »
