Global Power Device, Inc. Enables Wide Adoption of Silicon Carbide Devices

Silicon Carbide becoming the value leader in mid to high voltage power applications LONG BEACH, Calif. -- Today, ahead of the upcoming APEC Conference, Global Power Device, Inc. (GPD) announced a new line of Silicon Carbide (SiC) diodes that delivers ultra-high performance at prices that are competitive with conventional Silicon diodes. The company's production-ready, 150mm Silicon Carbide Wafer...

Read More »

GaN on Silicon Power Devices feature JEDEC qualification.

Based on EZ-GaN™ technology, 600 V Total GaN™ TPH3006PS HEMT comes in TO-220 package with low on-state resistance of 150 mΩ and low reverse-recovery charge of 54 nC. Also available in industry-standard TO-220 packages, TPS3410PK and TPS3411PK GaN diodes offer 6 A and 4 A operating currents, respectively, with forward voltage of 1.3 V. Applications include power supplies and adapters, PV...

Read More »
Explosionproof LED Beacon Light has corrosion-resistant design.

Explosionproof LED Beacon Light has corrosion-resistant design.

Intended for locations where signal visibility is critical, HALSB-CRNM-LED strobing signal beacon carries Class 1, Division 2 Groups A/B/C/D certification- and T2D operating temperature rating. LED lamp assembly provides 4 flashes/sec, has 50,000 hr operational life rating, and comes in choice of light colors. NEMA 4X rated against water intrusion and USCG approved for marine locations, product...

Read More »

Non-Punch Through IGBTs serve high-performance applications.

With 25, 50, and 70 A current ratings, 1,200 V non-punch through (NPT) IGBTs are based on Power MOS 8™ technology and can be packaged with Microsemi FREDs or silicon carbide Schottky diodes. Gate charge promotes accelerated switching, while hard switching operation greater than 80 kHz lends to power conversion efficiency. SMT backside solderable D(3) package option is available for these Short...

Read More »

Silicon PIN Limiter Diode targets L- and S-Band applications.

Operating in 50 MHz to 4 GHz frequency range, MADL-011008 is designed for use in passive limiter control circuits to protect sensitive receiver components such as low noise amplifiers, detectors, and mixers. Device provides 0.15 dB insertion loss, 20 dB input return loss, and 20 dB output return loss. Housed in 1.2 x 1.5 mm PDFN package, diode exhibits +40 dBm Peak and +30 dBm CW Power.

Read More »

AMEC Enters Solid-State Lighting Market

Company debuts MOCVD Platform for low-cost high-volume manufacture of HB-LEDS, with extendibility to GaN-on-Silicon applications SHANGHAI - At SEMICON China next week, Advanced Micro-Fabrication Equipment Inc. (AMEC) will make its Solid-State Lighting (SSL) market debut with a new multi-reactor Metal Organic Chemical Vapor Deposition (MOCVD) cluster tool. The Prismo D-Blue™ MOCVD platform...

Read More »

Hazardous Area LED Light has explosionproof design.

Rated for Class I Division I areas with explosionproof requirements, XP 70 W LED Light is resistant to vibration and offers various mounting options to meet jobsite/application requirements. Product produces 5,800 lm of true white light with little to no heat and can be shut off and turned directly back on without requiring any cooling time. in addition to portable applications, this light can be...

Read More »

Vishay Intertechnology to Showcase Industry-Leading Power MOSFETs, Passive Components, Diodes, and Power ICs for Wide Range of Applications at APEC® 2013

MALVERN, Pa. — Vishay Intertechnology, Inc. (NYSE: VSH) today announced its technology lineup for the Applied Power Electronics Conference and Exposition (APEC®) 2013, taking place March 17-21 in Long Beach, Calif. In booth 113, Hall A, the company will be highlighting its latest industry-leading power MOSFET, passive component, diode, and power IC technologies for a wide range of...

Read More »
Thyristor Power Control Devices expand usable range of lighting.

Thyristor Power Control Devices expand usable range of lighting.

Alternistor Triac (Q6008LH1LED and Q6012LH1LED Series) and QUADRAC (Q6008LTH1LED and Q6012LTH1LED Series) Thyristor Power Control Devices- are designed for use as switch in dimmer circuit to adjust light output of LED bulbs and strings. Products let- designers of AC line-based dimmers for LED lighting accommodate range of operating parameters without reducing reliability or dimmer performance....

Read More »
Let Our Safety Experts Lower Your Risk
Sponsored

Let Our Safety Experts Lower Your Risk

Elite Technical Services provides your company with qualified and experienced safety experts. Specializing in confined space and high-angle technical rescue and jobsite hazard assessment, your workplace safety is the top priority. Check out the video to learn more.

Read More »

All Topics