Rectifiers (Diodes)

Silicon Diode Modules feature 11 and 6.5 KV blocking capability.
Rectifiers (Diodes)

Silicon Diode Modules feature 11 and 6.5 KV blocking capability.

Designed to meet high voltage blocking and high current requirements, Models QRSB165001 and QRD6565001 each feature 2 ribbon-bonded, 67 mm diode elements, which provide 650 A of steady-state current. Units offer 11 KV/650 A single and 6.5 KV/650 A half-bridge configuration while providing 12 KV isolation to baseplate. Housed in corona-resistant package, modules are suited for DC power supplies,...

Read More »
Single Fast Diode Module is rated to 600 V, 1,000 A FWD.
Rectifiers (Diodes)

Single Fast Diode Module is rated to 600 V, 1,000 A FWD.

Developed for use on 230 Vac lines or 340 Vdc lines, QRS061K001 offers average current rating of 420 A and can be used for adding increased free-wheeling diode capability across Powerex IGBTs. Isolation voltage is rated at 3 kV RMS, and thermal management system incorporates AIN substrate with copper base. In addition to isolated mounting, features include recovery time TRR of 150 ns max....

Read More »
Rectifiers (Diodes)

Schottky Rectifier Diode suits eco-design power supplies.

Housed in ECOPACK®2-compliant package that meets RoHS regulations, Model STPS50U100C features typical forward voltage drop of 0.64 V at 25 A and 0.38 V at 5 A. Device has max leakage current of 200 Â-µA, max average forward current of 50 A, and repetitive peak reverse voltage of 100 V. Designed to help manufacturers achieve energy-efficiency approvals, such as 80 PLUS®, diode is...

Read More »
Silicon Surge Protection Diodes meet IEC61000-4-5 standard.
Rectifiers (Diodes)

Silicon Surge Protection Diodes meet IEC61000-4-5 standard.

Maintaining over 75% of surge protection capability up to 150°C, STIEC45 Transil(TM) family protects power supplies against surges, electrostatic discharge, and electrical fast transients. Device is soldered to standard-sized metal pads on pc-board and delivers low leakage current of 0.2 Â-µA at 25°C and 1 µA at 85°C. Offered in 8 x 6 mm SMC surface-mount packages,...

Read More »
High Frequency Battery Charger delivers up to 2,500 W.
Rectifiers (Diodes)

High Frequency Battery Charger delivers up to 2,500 W.

Rated for heavy-duty applications with -40 to +70°C temperature rating for full specification, BCH 2K5-120-EQ accepts input voltage range of 190 V to 264 Vac, and in float-mode it provides 135 Vdc/16 A for charging 120 V, 60 cell battery. Featuring modular design, convection cooled unit also has push-button activated, manually initiated equalize cycle, adjustable in 1-9 hr range. Equalize...

Read More »
Schottky Bridge Rectifier features low 2.7 mm profile.
Rectifiers (Diodes)

Schottky Bridge Rectifier features low 2.7 mm profile.

Packaged in HD DIP case, Model CBRHDSH2-100 has low reverse leakage current of 0.7 Â-µA and addresses need for 2 A, 100 V full wave bridge rectifier in power management, solid state lighting, and power over Ethernet applications. Device offers 50% reduction in utilized board space compared to 4 individual Schottky rectifiers in SMA package.

Read More »
Schottky Diodes offer optimized operating characteristics.
Rectifiers (Diodes)

Schottky Diodes offer optimized operating characteristics.

Available in 4 device configurations, CMSSH-3E series feature standard max rated peak repetitive reverse voltage of 40 V and max rated continuous forward current of 200 mA. Other specifications include max forward voltage drop of 0.42 V and switching speed of 5 ns. Designed for portable handheld electronic products, series comes in SUPER miniT SOT-323 SMT case. Configurations include single;...

Read More »
Bridge Rectifier has 1.14 mm max profile height.
Rectifiers (Diodes)

Bridge Rectifier has 1.14 mm max profile height.

Configured as full wave bridge rectifier, CMFBR-6F consists of monolithic chip in SOT-143 SMT case featuring four 60 V, 140 mA switching diodes. Characteristics such as max capacitance of 5 pF, max leakage of 10 nA, and typical switching speed of 1.0 Â-µs accommodate requirements of computer and peripheral equipment circuits demanding uniform response in critical design applications.

Read More »
Dual In-Series Switching Diode comes in SMT package.
Rectifiers (Diodes)

Dual In-Series Switching Diode comes in SMT package.

Supplied in SOT-23 surface mount case, CMPD2005S consists of two 350 V switching diodes with in-series configuration. Characteristics such as max per diode rated peak repetitive reverse voltage of 350 V, max rated peak repetitive reverse current of 200 mA, and max forward voltage drop of 0.87 V suit applications requiring increased maximum voltage. Also, configuration enables use of 2 diodes as...

Read More »
Rectifiers (Diodes)

Diode Array tolerates high-voltage phone line transients.

Model MMBD5004BRM miniature quad switching diode array, designed for bridge implementation, simplifies interface to telephone tip/ring applications and complies with FCC polarity requirements. It features 400 V rating as well as current rating of 225 mA continuous and 625 mA peak. Contained in SOT26 packaging, it has 2 separate pairs of series-connected diodes for linking as full-wave bridge...

Read More »
Let Our Safety Experts Lower Your Risk
Sponsored

Let Our Safety Experts Lower Your Risk

Elite Technical Services provides your company with qualified and experienced safety experts. Specializing in confined space and high-angle technical rescue and jobsite hazard assessment, your workplace safety is the top priority. Check out the video to learn more.

Read More »

All Topics

COVID-19 Response Suppliers COVID-19 Response:
Can Your Company Help Provide Critical Supplies?

We are using the power of our platform to aid in the mass shortage of critical supplies. If your company can help provide supplies, capabilities, or materials for products such as N-95 Masks and Tyvek SuitsPlease let us know.

COVID-19 Response Suppliers