Square D® Square-Duct Galvanized Steel Wireway
COMBINES CORROSION RESISTANCE WITH INCREASED ASSEMBLY EASE PALATINE, Ill. - December 20, 2005 - Square D® SQUARE-Duct® NEMA Type 1 galvanized steel wireway combines corrosion resistance with greater assembly ease. Because wireway sections and fittings are completely open on one side, no pulling through of wires and cables is required; they can be simply laid into the wireway without fear of...Read More »
Metal Raceways connect with competitive systems.
Available in steel, aluminum, single- or multi-channel versions, Metal Raceways feature UL classified transition fittings, Handi-Screw(TM) to facilitate box installation, and By-Pass(TM) divider to optimize space for data cable in multi-channel units. Boxes feature rounded corners and single-seam construction. Extensive line of plates accommodates full range of datacom and power connections.Read More »
Perimeter Raceway has modular design and scored base.
Designer Series 4000 steel raceway incorporates crossover feature that enables receptacles and data activations to be positioned in same channel or on downward facing surface. Featuring obstacle avoidance fittings and in-base integral channel divider, unit maintains integrity of data channel separation when cables cross over power channel. Adjust-to-fit raceway couplings allow up to 4 in. of...Read More »
Non-Metallic Raceways offer application-specific options.
BaseTrak-® 2-and 3-channel non-metallic raceway systems feature data- or power-only accessibility and T-568 compliant bend radius. For application specific flexibility, offerings include 2-channel BaseTrak and snap-on 2-gang flush box, 3-channel BaseTrak full capacity 1-, 2-, and 3-gang boxes, and 3-channel BaseTrak 1- and 2-gang flush boxes. Impact-resistant, non-conducive design eliminates...Read More »
Accelerating Composites Production with Dielectric Cure Monitoring
This white paper provides an in-depth explanation of how dielectric monitoring works, and why it's the best choice for any company working with advanced composite materials.Read More »
Raceway features overlapping faceplates.
Model SR600 Metallic Surface Raceway features Steel City? Nonmetallic Overlapping Faceplates for tamper resistance. Faceplates have one-piece design with 2-step latches for installation. They can accept 2 device plates for power and data connections and are suited for dual voltage applications featuring SR600 raceway with factory-installed voltage divider. Available in ivory or gray, faceplates...Read More »
Feed-Through Wireway protects electrical wiring.
NEMA 12/IP 659 rated, UL Listed Type 1201 wireway protects against dust, dirt, oil, and water. Configuration offers complete solutions with 90-Read More »
Wireway System permits easy service access.
Comway(TM) Lay-In Wireway uses fiberglass composite and fire-retardant resin formulations for corrosion resistance. Snap-on cover protects data control, communication, and power cables from adverse atmospheric conditions and unauthorized/accidental access. Wireway carries Class 1 fire rating, maintains UV resistance and low thermal conductivity, and can be used where metallic systems are...Read More »
Wiring Trough allows quick assembly and mounting.
Type 1 Screw Cover Wiring Trough provides protection and clear path for power and lighting control cables to locations throughout building. Joining method attaches end sections without fasteners or heat. Unpainted, 16 or 14 ga galvanized-steel trough features mounting holes on back, and flat-cover design, allowing it to be mounted flush with walls and ceilings. Five cross-section sizes are...Read More »
Steel Raceways/Fittings protect wires in turns and corners.
SnapMark(TM) SMS500 and SMS700 raceways feature inside, outside, and flat radius elbows. Steel fittings keep wires and cables from bending too sharply and kinking, which can cause transmission slow-downs or failures along delicate voice and data communications pathways. Suitable for CAT5e, CAT6, fiber, and coaxial cables, 1 in. radius elbows meet standard radius requirements and snap onto most...Read More »
Lay-In Wireway provides efficient installation.
Made of 16 and 14 ga galvanized steel, Type 3R wireway consists of open-sided sections and fittings that provide access along entire wiring run. Self-connecting system offers quick-release cover latches for access to internal wires and cables. Complete selection of sections and fittings is available in 3 sizes: 4 x 4 in., 6 x 6 in., and 8 x 8 in. Wireway protects against rain, sleet, and snow, as...Read More »
560 and 572 Series IP67 Waterproof Inline Plug and Socket Connectors with Shock and Vibration Resistance
EDAC's new line of IP67 waterproof plug and socket connectors represent the cutting edge of waterproof connection technology. Part of the 560 and 572 series of connectors, they utilize innovative design concepts to deliver a level of performance and value that is unmatched in the industry. See our video to learn more.Read More »