Putty

Latest PIG High-Temp Epoxy Putty is Composed of Premeasured Base and Activator
Putty

Latest PIG High-Temp Epoxy Putty is Composed of Premeasured Base and Activator

The PIG™ High-Temp Epoxy Putty is used for patching applications such as exhaust pipe, tanks, iron piping, castings, stripped threads, molds and ductworks. The product can be used for repairs in temperatures as high as 500ºF and as low as -40ºF. It cures concrete-hard in one hour and sets in minutes at room temperature. The PIG™ putty is solvent-free and can be drilled, tapped, sanded or...

Read More »
Cera Mastic Refractory Putty dries at room temperature.
Putty

Cera Mastic Refractory Putty dries at room temperature.

Used for patching, repairing and filling fissure, Cera Mastic Refractory Putty offers adhesion to refractory types without chipping or flaking. Providing tough repaired surfaces over temperature range of 500°C to 1500°C, unit does not contain refractory ceramic fiber. Product is not sensitive to freezing and exhibits no sintering, shrinkage, or cracking with thermal cycling.

Read More »
High-Temperature Sealant suits applications to 950°F.
Miscellaneous Compounds

High-Temperature Sealant suits applications to 950°F.

Formulated by combining high-temperature resin with ceramic fibers and powders, Pyro-Putty™ 950 can be used as gasketing compound for boilers, compressors, heat exchangers, furnaces, ovens, and exhaust manifolds. Product repairs rough, scored, or irregular surfaces and is resistant to chemical and steam attack, high pressure/vacuum atmospheres, mechanical vibration, and joint movement. Offered...

Read More »
Epoxy Stick facilitates fuel tank repairs.
Putty

Epoxy Stick facilitates fuel tank repairs.

Offering resistance to ethanol and most solvents, Permatex Fuel Tank Repair Epoxy Stick is suited for filling holes and damaged seams in both metal gas tanks and containers. Product comes as 2-part putty in stick form which helps measure and mix proper amount. Finished repair sets in just 1 hour and can be drilled, sanded, threaded, or filed after 5 hours. When fully cured, epoxy withstands...

Read More »
Distillation 101: A Guide to Distillation and Separation Technologies
Sponsored

Distillation 101: A Guide to Distillation and Separation Technologies

Distillation is a separation unit operation that involves multiple countercurrent-stage steps, separating two or more volatile components. This results in the contact of liquid and vapor most generally in counterflow. Distillation 101: A Guide to Distillation and Separation Technologies provides an in-depth look at everything you need to know about distillation, including: Design procedures Equipment components Applications

Read More »
Fillers

Silicone Putty fills gaps in electronic assemblies.

With thermal conductivity of 3.5 W/mK, Tputty(TM) 506 series is specifically formulated to fill large and uneven gaps in high-wattage electronic assemblies. Soft, single-part, silicone putty does note require any cure, transfers little to no pressure between interfaces, and is non-abrasive. Conformable and reworkable, filler is colored for automatic detection systems and has viscosity that...

Read More »
Repair Putty can cure underwater.
Putty

Repair Putty can cure underwater.

Designed to bond to fiberglass, wood, metal, glass, and concrete, Fix Repair Putty is impervious to oil, gasoline, alcohol, caustic detergent, and salt water oxidation. Product is heat tolerant to 300°F and cures in 24 hours. Once cured, putty can be sanded, drilled, tapped, screwed, and painted.

Read More »
Adhesives and Putties suit applications to 2,000F.
Putty

Adhesives and Putties suit applications to 2,000F.

Designed to bond metals, ceramics, and dissimilar materials, Durabond(TM) Metallic Adhesives and Putties overcome brittle bonds obtained with ceramics and offer impact resistance associated with soldering and welding. Adhesives can be drilled, tapped, and machined, and do not contain epoxies or silicones. Inorganically bonded and chemically cured, VOC-free products are suitable for repairing and...

Read More »
Miscellaneous Compounds

Mold Repair Paste comes in 50 ml dual-barrel cartridges.

Formulated to produce long-lasting repairs to fiberglass molds, RAPID PATCH repair paste can be feathered out after curing for less than 20 minutes at 75Â-ºF. It chemically bonds to damaged mold sections, and offers sag resistance even when applied to vertical surfaces. Based on methylmethacrylate (MMA) chemistry, fast-curing paste can also be used for filling plastic, steel, and aluminum...

Read More »
Coatings

Medical Products meet osteoinductive bone graft needs.

NuBone(TM) Osteoinductive Bone Graft product line includes 100% allograft tissue product, composed of osteoinductive demineralized bone matrix (DBM) combined with cortical bone gelatin carrier. Free of chemical additives and synthetics, NuBone DBM Putty and NuBone DBM Gel are designed for use in spinal fusion, trauma, and reconstructive bone grafting procedures. Aseptic manufacturing process...

Read More »
Acoustical Materials

Acoustical Solutions Now Offers a Full Line of Firestopping Products to Defend Against Sound and Smoke

Firestop materials serve two primary purposes - they reduce sound transmission between rooms, and they block the spread of flame and smoke through the small spaces in a building. These products are appropriate for use in residential, commercial and industrial settings. In terms of sound reduction, firestop materials work well to seal off the tiny spaces in walls, floors and ceilings through which...

Read More »

All Topics