B. Braun Smart Infusion Pump Technology to Be Featured in Integrating the Healthcare Enterprise (IHE) Interoperability Demonstration at AAMI 2013
BETHLEHEM, Pa. - B. Braun Medical Inc. (B.Braun) announced today that its Outlook-® 400ES Infusion pump will be featured in an interoperability demonstration led by the Integrating the Healthcare Enterprise-® (IHE) Patient Care Device (PCD) Domain at the Association for the Advancement of Medical Instrumentation (AAMI) 2013 Conference & Expo, June 1-3 in Long Beach, California. B.Braun will...
Read More »
Semi-Trash Pumps handle solids up to 3/4 in. in size.
Equipped with Honda, Subaru, or Mi-T-M engine, Semi-Trash Pumps are available in 2 and 3 in. models, each with total suction lift of 28 ft and max head limit of over 100 ft. Pumps are constructed with silicon carbide seal for leak-proof operation, and precision-molded cast iron impeller and volute- for optimized engine performance. Units are suitable for civil engineering, construction, flood...
Read More »MAXXDRIVE Industrial Gearing from NORD DRIVESYSTEMS - At work in the Swiss Alps
Located in the Swiss Alps, Industrial Gearing from NORD DRIVESYSTEMS is an integral part of the pumped storage hydroelectric power station expansion entitled -»Linthal 2015 project. Pumped-storage hydroelectricity: PSH is a type of hydroelectric power generation used by some power plants for load balancing. The method stores energy in the form of potential energy of water, pumped from a lower...
Read More »Jet Edge Names TECHJET 2012 International Distributor of the Year
TECHJET Sells Jet Edge WaterjetMachines in Poland, Eastern Europe ST. MICHAEL, Minnesota, U.S.A.- – Jet Edge, Inc., a world leading manufacturer of ultra-high pressure waterjet technology, is pleased to announce that TECHJET of Malbork, Poland has been named its 2012 International Distributor of the Year. TECHJET carries Jet Edge’s full line of ultra-high pressure waterjet pumps for...
Read More »
Axial Flow Check Valves for Pumps and Compressors
DFT® Inc. has provided a range of valve solutions for customers struggling with pump and compressor problems.
Read More »JOT Automation Has Delivered Manufacturing Solution for Tandem Diabetes Care
OULU, Finland- – JOT Automation, a global automation company, has delivered a novel manufacturing solution for Tandem Diabetes Care-®, Inc., which is used to manufacture a component of the t:slim-® Insulin Pump. The partnership with Tandem Diabetes Care is part of JOT Automation's growth strategy to use its mass production know-how, originated from the telecom industry, to serve the needs of...
Read More »
Pneumatic/Hydraulic Pumps serve precision clamping applications.
Compatible with- Kurt single-acting 4, 6, and 8 in. vises, portable KHP5000PH provides constant hydraulic pressure and holding power. Pump operates with ordinary shop air at 20–90 psi input and incorporates internal load limiting valve, air exhaust muffler, and air and oil filters. Rated at 5,000 psi, air hydraulic pump is driven by 1 hp pneumatic motor and- actuated with hand operated switch...
Read More »
Meet the Virtual Industries Team in Pennsylvania at MD&M East for State-of-the-art Part Handling Solutions
COLORADO SPRINGS, CO -- Virtual Industries Inc., a leading supplier of manual vacuum handling solutions, announces that it will display advanced systems for part handling in Booth #1935 at the Medical Design Manufacturing (MDM) East exposition, scheduled to take place June 18-20, 2013 at the Pennsylvania Convention Center in Philadelphia. Demonstrated at the show, the Small Part Handling Kit for...
Read More »Engine-Driven Trash Pumps handle dirty liquids.
Targeting rental and construction markets, Trash Flow-® TFCC-ML™ Series offers pump engines up to 40 hp, 4 or 6 in.- connection sizes, and fluid handling capabilities- from 460–1,185 US gpm. Trash Flow-® TFCC-ME™ Series, for municipal and industrial pump markets, includes 3, 4, 6, 8, 10, and 12- in.- sizes with- fluid handling range of 450–5,500 gpm. Standard features include pump...
Read More »
Liberty Pumps Ends Production of the Pedestal Sump Pump
May 17th marked the end of an era for Liberty Pumps with the final model 101 pedestal sump pump being produced in its Bergen, NY facility.- The model 101 is the last remaining pump from the company's original product offering dating back to 1965. It's pretty amazing that this product sustained a 48 year production life given the advancements and popularity of submersible pump technology, states...
Read More »
Syringe Pump is suited for microdialysis applications.
Holding up to 4 syringes, CMA 4004 Syringe Pump delivers flow rates from 0.54 pL/min to 11.70 mLpm for applications requiring accurate flow. Product features touchscreen user interface in addition to syringe library that includes- most common syringes used for microdialysis.
Read More »
Standex Engraving Mold-Tech Offers Nickel Shell Capabilities on a Global Scale
Standex Engraving Mold-Tech is the premier, global supplier for mold texturing and surface finishing. With a full range of services, Standex Engraving Mold-Tech is also the only nickel shell supplier producing in three global locations. See our video to learn more.
Read More »
