New Pumps Products

Tiny Pumps dispense small amounts.

SV700 Series of inert, solenoid-operated micro pumps are suitable for dispensing re-agents, dilutants and lubricants. Pumps are less than 3 in. high, have diameter of 1.10 in., and dispense volume of 50-250 -µL. Available with glass-filled polypropylene pump head and EPDM or viton elastomers, pumps are compatibile with wide range of fluids. Fluid connections include 1/4-28 flat bottom ports,...

Drum Pump has no moving parts.

Dual-Force Vac dual mode (fill/empty) drum pump is driven by filtered compressed air and Transvector air amplifier. It is capable of filling 55-gallon drum in less than 2 minutes. Pump features fast-turn switch that changes from vacuum to pump mode, automatic safety shutoff valve to prevent overflows, and relief valve that limits internal drum pressure to 8 PSIG. Unit is resistant to most...

Submersible Pumps do not require cleaning.

N-Pumps employ open-type self-cleaning impeller, and while operating, each leading edge passes across sharp stationary relief-groove. This action ensures that rags, stringy materials and solids are sheared, cleaned from impeller and pumped away. Pumps maintain high level of efficiency, even in fluids with high solids and fibrous content.

Metering Pumps feature corrosion resistance.

MD Metering Pumps are available with rotating parts in 316 stainless steel, Hastelloy-® C4, titanium or Kynar-® and casings in HDPE, 316 stainless steel, or Halar-®-coated stainless steel. Mechanical seals are available with various metallurgies; PTFE lip seal can also be used. Pumps handle thin liquids and materials to 100,000 cps. They do not require pulsation dampeners or pressure...

Taking a New Product to Market: Outsourcing vs. Internal Product Development

To learn if outsourced new product development (NPD) is right for your needs, and how companies like Vollrath Manufacturing Services can help, download this white paper now.

Pump Head handles 2 channels at once.

Masterflex Easy-Load II pump head can pump 2 channels simultaneously, eliminating need for stacking pump heads. Flow range is 0.06 to 1000 mLpm per channel depending on drive rpm and tubing selection. Each pump head accepts L/S 13, L/SC 14, L/S 16 and L/S 25 tubing sizes in any formulation. Available with cold-rolled steel or stainless steel rotors, pump head is also suitable for applications...

Diaphragm Pump primes itself to 23 ft wc.

Air-operated Tapflo Aluminum Series double diaphragm pumps are suited for wide range of media, including paint and coatings, waste plant chemical dosing and many other pH-neutral liquid pumping applications. Pumps are available in 5 sizes covering flow capacities up to 110 gpm with infinitely variable flow control and dry run capability. Pumps handle wide range of fluid viscosities as well as...

Oil Pump fits into drums and tanks.

Model 1737 1:1 ratio stub-style oil pump works with oils and non-corrosive liquids in industrial, manufacturing and automotive service shops. Pump fits drums and tanks with a 2 in. bung opening. It has maximum air pressure of 145 psi, working pressure of 100 psi, and self-lubricating pressure relief port. It comes with connecting hoses and an air line filter. Pump weighs 6 lb.

Magnetic Drive Pump has stainless steel impeller.

Model TE-7-MD-SST magnetic drive pump can pump up to 52.5 gpm, liquid temperatures up to 250-

Vane Pump handles high-volatility fluids.

Magnatex-® MPT Regenerative Turbine Vane Pump is a magnetically driven, sealless pump featuring a regenerative turbine vane impeller and rare earth Neodymium magnets for synchronous drive with no slippage. Close-coupled design eliminates alignment problems. Pump is capable of operation under 2 ft of static NPSH at line pressures up to 100 psi and flow rates of 2-3 gpm.

Multistage Pump delivers high pressures.

Model 3355 handles flows up to 1500 gpm and heads up to 1640 ft at pressures to 800 psi and temperatures to 280-

How SpinSelect Can Save You Time and Money

Thanks to the unique SpinSelect™ Multi-Pocket selectable quick change tool holder, it's time to rethink the range, complexity and volume of parts that your lathe can produce. Our Spin-Select™ tool was created to increase productivity and consistency by decreasing downtime associated with lathe cutting tool and insert setups or changeovers. This product is a game-changer for the industry and we're pleased to show you why.