Reduction Units offer optimized cutter combinations.

Reduction Units offer optimized cutter combinations.

Featuring one-piece flange housing and quick-change cutter cartridge, Series 4 Annihilator(TM) Grinders are twin-shaft solids reduction units suited for industrial and municipal applications. Equipped with counter-rotating, intermeshing cutters and spacer cutters, grinders protect downstream equipment from being plugged or damaged from large solids.

Read More »
Pressure/Vacuum Pump suits portable oxygen concentrators.

Pressure/Vacuum Pump suits portable oxygen concentrators.

Horizon Model 2250 features low-vibration WOB-L-® piston and brushless dc motor with variable speed from 1,000-3,000 rpm, allowing airflow to be steplessly varied according to patient need. Optional closed-loop controller allows motor speed to be maintained at preset, constant rpm, regardless of load or voltage fluctuations. Oil-less piston and cylinder design ensures clean, uncontaminated air...

Read More »
Axial Piston Hydraulic Pumps include electronic control.

Axial Piston Hydraulic Pumps include electronic control.

Medium-duty PVM pumps are offered with Proportional Pressure Control, which provides users with proportional pressure compensating control with pressure cutoff. Control is available in 12 or 24 Vdc, NO or NC. Operating parameters are 350 psi with 3,000 psi proportional pressure control, 600 psi with 3,250 psi max pressure cutoff setting, 100 psi hysteresis in open loop operation, and 5 psi...

Read More »
Vacuum Pumps suit filtration and aspiration applications.

Vacuum Pumps suit filtration and aspiration applications.

Oil-free vacuum pumps, models 2522B-01, 2534B-01, 2546B-01, 2567B-50, 2561B-50, 2585B-50 and 2581B-50, are configured with inlet liquid trap, mounted vacuum gauge, muffler, and vacuum regulator. Utilizing Wob-L piston, pumps create flow and vacuum levels to 29.8 in. Hg, while high water vapor tolerance allows water vapor to pass through cleanly. They may be used with buffer solutions, but are not...

Read More »
Miniature Diaphragm Pumps suit air, gas, and liquids.

Miniature Diaphragm Pumps suit air, gas, and liquids.

Featuring .25-4 l/min capacity, Series NMP is available with brush DC, ironless core, or brushless DC motors to meet variety of requirements. Pumps generate vacuum to 18 in. Hg or pressure to 15 psig. They are suited for medical diagnostic analyzers, personal samplers, and other portable instruments where small size and low current consumption are necessary.

Read More »
Pumps and Compressors are corrosion-resistant.

Pumps and Compressors are corrosion-resistant.

UL-listed air and gas diaphragm pumps, fitted with Group C explosion-proof motors, operate in Class I, Division I, Group C and D, as well as Class II, Group E, F, and G atmospheres. Featuring flow rates to 64 lpm, products generate deep vacuum to 29.74 in. Hg using 2 stages. Oil- and contamination-free pumps are available in PTFE and FFPM resin, 316 stainless steel, and other alloys. Applications...

Read More »

Modular Dry Pump targets semiconductor processes.

Intended for stringent demands of 300 mm applications, iGX platform is also effective in 200 mm fabs. Active Utility Control feature helps cut utility consumption during idle periods. The iGX provides Ethernet connectivity and web page publishing of key data, as well as comprehensive set of other networking options to assure pump availability.

Read More »

Dry Vacuum Pump suits fluorine processes.

Harsh duty, Model iH-F is available in range of peak speeds from 80-1,800 m3h-1. It includes sensing system that detects seal deterioration inside pump, allowing user to operate pump for long periods while maintaining confidence in seal integrity.

Read More »

Diaphragm Vacuum Pump is designed for steam autoclaves.

Suited for service in Class B steam autoclaves, Series 2119V features engineered resin and diecast aluminum construction. All wetted aluminum parts are epoxy-coated for corrosion protection. Umbrella valves and diaphragm are constructed of EPDM, which offers resistance to steam and water. Pumps provide up to 27 in. Hg vacuum, and max flow is rated at 0.81 cfm. Thermally protected motors are...

Read More »
Aluminum Bolted Pump handles large fluid volumes.

Aluminum Bolted Pump handles large fluid volumes.

Self-priming, 3 in. Model E3 ensures continuous operation by employing air valve system that eliminates stalling, icing, and need to lubricate. Capable of handling infinite variable flows up to 90% solids, pump features leak-free design with max particle clearance of -¾ in. Flange connections that conform to both ANSI 150 lb and DIN No. 80 standards enable pump to handle adjustable flow rate to...

Read More »
Cut and Bevel Pipe up to 63" Diameter with a Single Lightweight, Portable Machine
Sponsored

Cut and Bevel Pipe up to 63" Diameter with a Single Lightweight, Portable Machine

CS Unitec is a leader in power tools designed for industrial applications, with products that set the standard for robust performance and industry-leading reliability. Adding to our long list of innovation is a new line of pipe cutting machines. For cutting and beveling pipe up to 2" in thickness and diameters from 12" to 63", no other cutting system comes close. See our video to learn more.

Read More »

All Topics