Mag Drive Pumps operate at up to 70% efficiency.

Mag Drive Pumps operate at up to 70% efficiency.

Models DB6, 6H, 7, 8, 9, and 10 offer working pressure up to 80 psi and allow fluids up to 1.8+ sp gr to be safely pumped. Flow rates range from 15-95 gpm with discharge head from 5-68 feet away. Pumps also feature evenly spaced impeller diameters and are molded from corrosion-resistant GF Polypropylene or CF PVDF. Multiple motor adapters and drive magnet sets enable mounting to any NEMA or IEC...

Read More »

Depco Pump Company-Distributor for Hydra-Cell Metering Solution

Designed to meet or exceed API 675 performance standards for steady-state accuracy, linearity and repeatability. (OCTOBER 2006) - Wanner Engineering, Inc., Minneapolis, Minnesota, announces the introduction of a new line of six metering pumps featuring precision electronic flow control. New Hydra-Cell Metering Solutions pumps are being shown by the company at the Water Environmental Federation...

Read More »
Thomas Awarded Initiative Mid-Sized Companies Innovation Award for 1420 Series Pump

Thomas Awarded Initiative Mid-Sized Companies Innovation Award for 1420 Series Pump

Thomas Products Division, a Gardner Denver Company, has received the Innovation Award of the Initiative Mid-Sized Companies in the medical category for the 1420 Series miniature diaphragm compressor and vacuum pump. Designed primarily for medical applications, the 1420 Series achieves higher flows than conventional standard diaphragm pumps of the same physical size. Manufactured in Puccheim,...

Read More »

Baxter Provides Update on Service Documentation Class I Recall

Baxter Provides Update on Service Documentation Class I Recall Models Include: COLLEAGUE Mono Volumetric Infusion pump, Product Codes 2M8151 and 2M8153; COLLEAGUE CX Volumetric Infusion pump, Product Codes 2M8161 and 2M8163; FLO-GARD 6201 Volumetric Infusion pump, Product Code 2M8063; and FLO-GARD 6301 Volumetric Infusion pump, Product Code 2M8064 DEERFIELD, Ill., Aug. 7 / / -- Baxter Healthcare...

Read More »
Jet Edge Exhibiting Cutting-Edge Waterjet Technology at CMTS 2007 Booth #3135, Oct. 15-18

Jet Edge Exhibiting Cutting-Edge Waterjet Technology at CMTS 2007 Booth #3135, Oct. 15-18

(ST. MICHAEL, Minn. - August 2, 2007) - Jet Edge, Inc. will demonstrate its latest waterjet cutting technologies at the Canadian Manufacturing Technology Show (CMTS) Oct. 15-18 at the Direct Energy Centre in Toronto, Ontario. During this global manufacturing event, Jet Edge will showcase its versatile High Rail Gantry precision waterjet system, its iP60-50 ultra-high pressure intensifier pump and...

Read More »
Moyno to Exhibit at WEFTEC 2007

Moyno to Exhibit at WEFTEC 2007

Springfield, Ohio - Moyno, a division of the Fluid Management Group of Robbins & Myers, Inc., will exhibit its complete line of water and wastewater products, featuring the field proven Moyno-® 2000 HS System and the latest innovations to the Moyno-® Annihilator(TM) grinders, at the WEFTEC show October 21-25 in Dallas at booth #5050. The Moyno-® Annihilator(TM) grinders are twin shaft solids...

Read More »

Variable Use Compressor Prime Silent Pac (Silent Pump)

August 17,2007 Griffin Pump and Equipment offers a variety of pumps with capacities from 5 gallons per minute to over 20,000 gallons per minute. The latest addition is the Variable Use Compressor Prime Silent Pac: o Large cleanout which allows removal of debris from the impeller without removing suction hose or suction piping. o Self priming compressor assisted o Sound attenuated enclosed pump...

Read More »
Vacuum Pumps power robotic end-of-arm tools.

Vacuum Pumps power robotic end-of-arm tools.

Suited for pick-and-place applications, Modular Venturi Vacuum Pumps and end-of-arm tooling components mount to 1 and 1.5 in. extrusion to create complete wrist-down end-of-arm tool. Available in 7 models ranging from 2.5-8.5 in., pumps offer 3 performance levels. Model L ranges from 0-10 in. Hg for low vacuum/high flow applications, while Model M ranges from 0-20 in. Hg for med vacuum/high flow,...

Read More »
R&M Energy Systems Features Power Sections, Surface Pumps and Closures at the 2007 Offshore Europe Conference and Exhibition

R&M Energy Systems Features Power Sections, Surface Pumps and Closures at the 2007 Offshore Europe Conference and Exhibition

Willis, Texas - R&M Energy Systems, a division of the Fluid Management Group of Robbins & Myers, Inc., will exhibit at the 2007 Offshore Europe Oil & Gas Conference and Exhibition, September 4 -7 at the Aberdeen Exhibition and Conference Centre in Aberdeen, Scotland. The Company will exhibit the Moyno® ERT(TM) Power Section that features an even rubber thickness stator, significantly improving...

Read More »
Precision Machined Parts for High Tech Applications
Sponsored

Precision Machined Parts for High Tech Applications

For precision and value that sets the standard for quality and craftsmanship, EGS Production Machining is the source for precision and value. Our extensive capabilities and dedication to customer service allow us to deliver the optimal manufacturing solution. See our video to learn more.

Read More »

All Topics