New: Buy Now on Thomas and Pay Over Time with Credit Key   Learn More

Self-Priming Pump Series lifts 13 ft in 90 sec.

Magnetically driven, fluoroplastic SMX-F series features integrally molded priming and air separation chambers for repeatable self-priming. Construction is of CFR-ETFE, with available bearing systems of carbon, PTFE, and silicon carbide. Capable of flows to 90 gpm and heads to 80 ft, series uses standard NEMA C-face motors and is available with non-contact, self-radiating bearing system and 2...

Read More »
Magnet-Drive Pump has all-FRP, non-metallic design.

Magnet-Drive Pump has all-FRP, non-metallic design.

Corrosion-resistant 2530 Series 4 x 6 x 10 in. pump features fiberglass reinforced plastic (FRP) thermoset construction and one-piece reinforced casing with no separate liners. Components include magnets; silicon carbide shaft/sleeve bearing materials; and choice of vinyl ester, vinyl ester with BPO-DMA cure system, or epoxy resin wetted parts. Series includes 10 sizes, with capacities to 1,500...

Read More »
Digital Peristaltic Pumps suit industrial processes.

Digital Peristaltic Pumps suit industrial processes.

With flow capacities from 0-54 gph, Masterflex-® P/S Pumps are available in complete systems, which include standard digital drive, computerized drive, or stainless steel NEMA 4X process drive. Units offer repeatability of 0.1% and turndown ratio of 6,000:1. Pumps are self-priming, able to operate dry, and suitable for most chemicals. Featuring 4-line graphical LCD, multi-language, man/machine...

Read More »
Pump Head suits sanitary beverage metering applications.

Pump Head suits sanitary beverage metering applications.

Utilizing 7 different tube sizes, 313D pumphead offers flow range of .25-3,000 ml/min and pressures to 30 psi. Flavorings, colorings, and additives are given true positive displacement with no siphoning. To maintain purity of pumped product, pumphead has no valves, is self-priming, and can run dry without incurring damage. It delivers 99.5% accuracy rate and can be cleaned in-line at full...

Read More »
Hand Pump enables ergonomic pneumatic calibration.

Hand Pump enables ergonomic pneumatic calibration.

Suited for use with air and compatible gases, Series PCHP Pneumatic Calibration Hand Pump is engineered to source pressure and vacuum to check calibration of gages, switches, and recorders. Ergonomically designed cushion grips provide lend to comfort while simultaneously enhancing pump performance. All pistons utilize dual o-rings to ensure zero leakage, and oversized check valve provides smooth...

Read More »
Hydraulic Hand Pump acts as handheld calibration system.

Hydraulic Hand Pump acts as handheld calibration system.

Utilizing fully adjustable stroke control, Series HCHP Hydraulic Calibration Hand Pump allows for pressure generation up to 10,000 psi. Built-in triple filtration system maintains pump operation in dirty conditions, while oversized check valve ensures smooth and controlled operation. Also, industrial-grade materials - stainless steel, anodized hard coat aluminum, shatterproof plastic - promote...

Read More »
High-Pressure Pumps feature nested seal technology.

High-Pressure Pumps feature nested seal technology.

Used in industrial-grade pressure washers, High-Pressure Pumps feature NESTechnology(TM), where seals of packing assembly nest in place, supporting side walls and extending seal life. Nesting assembly holds up to spikes in water pressure, which occur every time pressure washer's gun is triggered. Teflon-® bronze rings support U-Seal to prevent premature wear and loss of pressure, while U-Seal...

Read More »

Michael Waltrip Racing Speeds Up Waterjet Cutting with 90,000 PSI Jet Edge X-Stream Waterjet Pump

NASCAR Team Waterjet Cuts 250 Parts for Each Racecar CORNELIUS, N.C., Jan. 13 -- Michael Waltrip Racing (MWR) has installed a 90,000 psi Jet Edge X-Stream xP90-100 waterjet intensifier pump at its fabrication shop in Cornelius, N.C. The pump will power MWR's Jet Edge waterjet cutting system, which it uses to make parts for its three NASCAR Sprint Cup Series teams and its NASCAR Nationwide Series...

Read More »
Pump targets high-flow applications.

Pump targets high-flow applications.

With flow rate up to 10,000 gpm, 12 in. DV300c Power Prime(TM) Pump produces total dynamic head up to 170 ft and handles 3 in. solids with semi-enclosed impeller. Unit operates at 80% efficiency and is designed specifically for high-flow applications, including bypass jobs. When combined with HDPE pipe and tanks, pump offers complete system to meet liquid handling needs.

Read More »
Diaphragm Pumps are available in single or dual head designs.

Diaphragm Pumps are available in single or dual head designs.

Designed for pressure or vacuum applications with low current requirements, Boxer 5100 and 5200 are intended for use with compatible liquids and gases, chemical dosing, sampling gases or liquids, or other applications in environmental, medical, or chemical processing. Dual head pumps can be configured for serial or parallel operation with combined flow to 10 Lpm (gas) or to 900 mLpm liquids....

Read More »

All Topics