Piston Pumps

High-Pressure Piston Pumps work with heavy materials.

Suited for transfer/supply of medium- to high-viscosity materials, ARO 65:1 ratio pump offering includes single- and 2-post extrusion pump rams and complete ram/pump packages for 5 gal containers. Chop-check pump packages handle fluids in excess of 1,000,000 cps and pressures to 7,475 psi. While chrome-plated plunger rod and cylinder are suited to pumping abrasive fluids, stroke lengths and cycle...

Read More »
Jet Edge Showcasing Latest Innovations in Water Jet Technology at FABTECH 2010, November 2-4, Atlanta
Jet Pumps

Jet Edge Showcasing Latest Innovations in Water Jet Technology at FABTECH 2010, November 2-4, Atlanta

Jet Edge Exhibit Includes 5-axis water jet cutting, new energy-efficient servo-driven intelligent water jet pump ST. MICHAEL, Minn. (Sept. 9, 2010) - Jet Edge, Inc., a leading manufacturer of ultra-high pressure waterjet systems, will showcase its latest water jet cutting innovations at FABTECH 2010, Nov. 2-4 at the Georgia World Congress Center in Atlanta. Look for Jet Edge in Booth 3906. During...

Read More »
Plunger Pumps deliver pressures to 3,500 psi for cleaning.
Piston Pumps

Plunger Pumps deliver pressures to 3,500 psi for cleaning.

With ratings of 5.5 gpm and 3,500 psi, models 5CP5140 and 5CP5140G1 are continuous-duty, industrial pumps offering precise flow setting with various belt-drive options. Model 5CP5140 features dual extended shaft for pulley drive from either side of pump using gas engine or electric motor, while model 5CP5410G1 is fitted with gearbox for mounting onto any standard 1 in. shaft gas engine. Helical...

Read More »
EF Series Drum Pumps
Pumps

EF Series Drum Pumps

The series includes a variety of high and medium viscosity drum pumps as well as high and low reduction pumps. They have medium performance with light viscosity drum/barrel pumps for container-to-container transfer of acids, corrosives and chemicals. Features include being sealless, lightweight, and economical. They are made of polypropylene, pure PP/PVDF or 316SS tubes and have dual speed...

Read More »
Gear Pumps

Self-Priming Gear Pumps feature pressure control option.

Suited for oil, fuel, water, and acid transfer applications, UP Series is available with nickel-plated bronze or PTFE gears, stainless or brass pump bodies, and stainless steel drive shafts. Models are differentiated according to flow and pressure capability as well as features and options. Some models are available with pressure control option, enabled via built-in microprocessor-based variable...

Read More »
Jet Edge Exhibiting New Energy-Saving Water Jet Pump Technology at EuroBLECH, 26-30 October
Jet Pumps

Jet Edge Exhibiting New Energy-Saving Water Jet Pump Technology at EuroBLECH, 26-30 October

Servo-Driven Water Jet Pump Uses Less Electricity, 80% Fewer Components ST. MICHAEL, Minn., USA - Water jet manufacturer Jet Edge will showcase its latest waterjet pump technology with live water jet cutting demonstrations at EuroBLECH 2010, 26-30 October in Hannover, Germany. Jet Edge will co-exhibit with its R&D partner Tecnocut in Stand B35, Hall 12. During EuroBLECH, Tecnocut and Jet Edge...

Read More »
NEW ATEX Certified Diaphragm Pumps From Air Dimensions Inc
Diaphragm Pumps

NEW ATEX Certified Diaphragm Pumps From Air Dimensions Inc

Air Dimensions Inc manufacturer of high quality diaphragm pumps is pleased to announce receipt of ATEX certification for its entire Standard Dia-Vac pump line( both pump and motor). ADI's ATEX motors are rated for Zone I, EEXd IIC T4 IP65, 115/230V, 50/60HZ with 60 deg ambient temperatures. The pumps are also CE Approved and ready for shipment within 1-2 days! These durable diaphragm pumps are an...

Read More »
Pneumatic Diaphragm Pump meets needs of laboratory operations.
Diaphragm Pumps

Pneumatic Diaphragm Pump meets needs of laboratory operations.

Equipped with spring-loaded valves, AD 6 pump can be installed in any position and has solid PTFE conductive and corrosion-resistant housing. It can be used in explosion-hazard areas and with inflammable liquids and meets all ATEX requirements for directive 94/9/EG. With volume delivery that extends to 66 gph and is adjustable by changing air flow, pump supports submersible operation and offers...

Read More »
Custom 2-Stage Vacuum Pump and Swing Piston Compressor
Vacuum Pumps

Custom 2-Stage Vacuum Pump and Swing Piston Compressor

Where independent functions are needed, KNF will match a variety of pumps together on a common motor to save cost and size. Driven by an electronically commutated DC (BLDC) motor, this custom pump provides our customer with a vacuum and pressure source in a remarkably small package for their instrument testing assembly. The complete pump, motor, and control require only a simple power connection...

Read More »
Economical Mini Swing-Piston Vacuum Pump and Compressor
Vacuum Pumps

Economical Mini Swing-Piston Vacuum Pump and Compressor

Standard AC and DC Motor available KNF announces an economical, high performance addition to its OEM swing-piston pump line, the NPK018. The NPK018 is ideal for use as a transfer pump, is available in compressor or vacuum pump models and can be operated in any position. Its sealed, swing piston moves media oil-free and without adding contamination. Despite its size, it features 18 liters per...

Read More »

All Topics