
New Cable Puller Features Force Indicator Display
G10 TUGGER is available with two-speed custom-designed motor that is capable of continuously pulling up to 8,000 pounds. Features multi-purpose foot switch that empowers user to select between high or low speed as well as starting and stopping the pull, while keeping the operator outside of the direct line of the pull. Provide workers the ability to accomplish the job without the frequent...
Read More »
New Cable Puller Features Force Indicator Display
G10 TUGGER is available with two-speed custom-designed motor that is capable of continuously pulling up to 8,000 pounds. Features multi-purpose foot switch that empowers user to select between high or low speed as well as starting and stopping the pull, while keeping the operator outside of the direct line of the pull. Provide workers the ability to accomplish the job without the frequent...
Read More »
New G1 Versi-Tugger Designed with Faster Pull Speed
Designed for pulls normally done by hand and can pull up to 68-percent faster when compared to manual pulling. Handle provides balanced weight distribution to decrease strain and allows safe two-handed operation. Five-position pulling-head attaches to 1/2-inch to 4-inch conduit and offers five different positions giving the professional the option to pick the angle for each pull.
Read More »
New G1 Versi-Tugger Designed with Faster Pull Speed
Designed for pulls normally done by hand and can pull up to 68-percent faster when compared to manual pulling. Handle provides balanced weight distribution to decrease strain and allows safe two-handed operation. Five-position pulling-head attaches to 1/2-inch to 4-inch conduit and offers five different positions giving the professional the option to pick the angle for each pull.
Read More »
Guide To Swageless Fittings
Electroline specializes in innovative, easy-to-install swageless fittings. The following guide will highlight everything you need to know about swageless fittings.
Read More »
Southwire Presents Maxis XD1 Circuit Puller with One-Person Set-Up and Operation
The Maxis XD1 Circuit Puller accepts 18V drills and delivers continuous pulling power up to 600 lbs and peak power of 1,000 lbs. The unit offers both strength under load and speed for performing the job on time.
Read More »
Southwire Presents Maxis XD1 Circuit Puller with One-Person Set-Up and Operation
The Maxis XD1 Circuit Puller accepts 18V drills and delivers continuous pulling power up to 600 lbs and peak power of 1,000 lbs. The unit offers both strength under load and speed for performing the job on time.
Read More »
Latest Cannon 6K Wire Puller Offers a Capacity of up to 6,000 lb
Cannon 6K™ Wire Puller is equipped with 4-speed motor and dual capstans. Unit delivers a pull speed of up to 8 ft and 28 ft per minute on low and 20 ft and 70 ft per minute on high. Puller is fitted with 30 in. extension and is capable of pulling out 9 ft of wire from conduit opening to capstan. Unit can be attached to receiver hitch truck and anchored if required.
Read More »
Latest Cannon 6K Wire Puller Offers a Capacity of up to 6,000 lb
Cannon 6K™ Wire Puller is equipped with 4-speed motor and dual capstans. Unit delivers a pull speed of up to 8 ft and 28 ft per minute on low and 20 ft and 70 ft per minute on high. Puller is fitted with 30 in. extension and is capable of pulling out 9 ft of wire from conduit opening to capstan. Unit can be attached to receiver hitch truck and anchored if required.
Read More »
DDHXA-75/100 Underground Puller comes with 3-speed gearbox.
Featuring BOSS air compressor, Duct Dawg Air DDHXA-75/100 Underground Puller can pull up to 7,500 or 10,000 lbs. Unit is hydraulically driven and controlled wirelessly. Product comes in 16 ft footprint and uses CANbus technology. Underground Puller is suitable for utilities and contractors and comes with a 3-axis boom. DDHXA-75/100 is equipped with twin capstan bullwheels.
Read More »
DDHXA-75/100 Underground Puller comes with 3-speed gearbox.
Featuring BOSS air compressor, Duct Dawg Air DDHXA-75/100 Underground Puller can pull up to 7,500 or 10,000 lbs. Unit is hydraulically driven and controlled wirelessly. Product comes in 16 ft footprint and uses CANbus technology. Underground Puller is suitable for utilities and contractors and comes with a 3-axis boom. DDHXA-75/100 is equipped with twin capstan bullwheels.
Read More »
Standex Engraving Mold-Tech Offers Nickel Shell Capabilities on a Global Scale
Standex Engraving Mold-Tech is the premier, global supplier for mold texturing and surface finishing. With a full range of services, Standex Engraving Mold-Tech is also the only nickel shell supplier producing in three global locations. See our video to learn more.
Read More »