Prototyping Systems

Vat Photopolymerization Systems

Applied Rapid Technologies adds Somos NeXt LV Grey to Materials Lineup

Somos NeXt LV Grey is a high impact nylon-like Stereolithography resin FREDERICKSBURG, VAÂ- – Applied Rapid Technologies Corporation (ARTCORP), a leading provider of rapid prototyping and short-run production solutions announces the addition of DSM Somos® NeXt LV Grey resin to its stereolithography materials portfolio. This resin is the latest development in the high-performance,...

Read More »
Applied Rapid Technologies Upgrades Objet Eden 500V to Connex Dual-Material Platform
Prototyping Systems

Applied Rapid Technologies Upgrades Objet Eden 500V to Connex Dual-Material Platform

ART's Connex 3-D Printer Simulates Properties From Rubber to ABS-Grade Engineering Plastics FREDERICKSBURG, VA - Applied Rapid Technologies Corporation (ART), a leading provider of rapid prototyping and short-run production solutions announces the upgrade of its Objet Eden 500V to the newest Connex dual-material platform. We were very pleased to hear Objet had developed an upgrade path to convert...

Read More »
Single Board Computers (SBC)

Starter Kit supports battery-powered embedded systems.

Offering complete starter package forÂ- rapid prototyping of battery-powered embedded systems, Qseven Mobility Kit comprises Qseven carrier board, 7 in. LVDS single touch display with LED backlight, battery manager, and smart battery module. Carrier board, measuring 95 x 145 mm, includes 6 USB ports, Ethernet port, LVDS and DVI interfaces, Mini PCI Express slot, and HD audio interface. Due...

Read More »
Miscellaneous Boards

FMC Prototyping Kit aids JESD204B ADC-to-FPGA connectivity.

Used to prototype high-speed JESD204B ADC-to-FPGA platforms, AD9250-FMC-250EBZ FPGA mezzanine card (FMC) featuresÂ- 2 AD9250 dual 14-bit JESD204B data converters. Kit provides four 14-bit ADC channels at 250 MSPS in FMC-compliant form factor. ADCs support Subclass 0 and 1 deterministic latency and provide SYNCREF signal for synchronization of all 4 channels, providing...

Read More »
Miscellaneous Boards

Starter Kit offers prototyping platform for SoC FPGAs.

Available on Emcraft Systems 34 x 59 mm mezzanine form factor system-on-module, which connects to SOM-BSB-EXT baseboard, SmartFusion®2 Starter Kit includes FlashPro4 programming and supports Ethernet, USB, SPI, I2C, and UART interfaces. USB-powered system has breadboard area for GPIO or FPGA I/O connection, 64 MB LPDDR, 16 MB SPI flash, and 2 user-controlled LEDs connected to GPIO on SOM....

Read More »
S2C Boasts Largest Prototype Ready(TM) Interfaces Library for Virtex-7 2000T FPGA Based Rapid ASIC Prototyping
Circuits

S2C Boasts Largest Prototype Ready(TM) Interfaces Library for Virtex-7 2000T FPGA Based Rapid ASIC Prototyping

Added 13 New Modules including a new High-Speed GTX Peripheral Category San Jose, CA - S2C Inc., a leading rapid SoC prototyping solutions provider, announced today the addition of 13 new Prototype Ready interface cards and accessories to its growing library of pre-engineered hardware and software components aimed at accelerating the development of SoC prototypes. These new modules enable users...

Read More »
Digitizers

Little Girl's "Magic Arms" Exoskeleton Design - Created by Stratasys 3D Printer Customer - is up for Designs of the Year Award

Stratasys itself is a finalist for, or has won, six recent unrelated awards and honors. Minneapolis, MN; Rehovot, Israel- Stratasys Ltd. (NASDAQ: SSYS) a leading manufacturer of 3D printers and production systems for prototyping and manufacturing, says that the magic arms" WREX exoskeleton, designed by Nemours/Alfred l. duPont Hospital for Children, has been nominated for the Designs of the Year...

Read More »
Prototyping Systems

Fastener Express: Effective Rapid Prototyping Concept Closes the Gap Between Development and High-Volume Production

For a considerable time already, the automobile industry in particular has focused on reducing the cost of purchased items in order to boost competitiveness. However, analyzing the entire procurement process holds significantly more promise. This is especially true for C-parts such as screws, bolts, turned parts and precision parts, for which the process costs in purchasing are about four times...

Read More »
New System for 3D Printing of Plastic Components
Sintering Services

New System for 3D Printing of Plastic Components

German additive manufacturing system manufacturer, EOS, has introduced a new system for 3D printing components by laser-sintering plastic powder, layer by layer. Availability in the UK is through the company's subsidiary in Warwick. Called FORMIGA P 110, the machine supersedes the P 100 model and introduces some major innovations and improvements to enhance process stability and reproducibility....

Read More »
Objet Launches Objet1000 at Euromold - World's Most Effective Large Format 3D Printer for Industrial Scale Prototypes
Prototyping Systems

Objet Launches Objet1000 at Euromold - World's Most Effective Large Format 3D Printer for Industrial Scale Prototypes

REHOVOT, Israel - - System is ideal for 3D printing of very large, fine detailed 3D models - Provides unrivaled Fit, Form and Functional application versatility, enabling designers and engineers to simulate a wide range of engineering plastics materials - Build tray size 1000 x 800 x 500 mm (39.3 x 31.4 x 19.6 inch) - See the Objet1000 at Euromold, Booth D90, Hall 11.0 - Objet Press Conference at...

Read More »

All Topics