BPM Microsystems to Debut Improved Configuration of Its Model 3800 Automated Programming System at the IPC APEX EXPO
HOUSTON — BPM Microsystems announces that its model 3800 automated programming system now is available with a side-mount option for the V-TEK TM-50 tape output media. This reconfiguration offers additional flexibility by allowing the machine to use options for tape, tray, tube and marking simultaneously. “There are a number of advantages to the side-mount option that include improved access...
Read More »
BPM Microsystems to Demonstrate Breakthrough Programming Solutions during the IPC APEX EXPO
HOUSTON - BPM Microsystems will demonstrate its breakthrough programming solutions in booth #108 at the upcoming IPC APEX EXPO, scheduled to take place February 19-21, 2013 at the San Diego Convention Center in California. The new 2800ISP parallel in-system device programmer incorporates the company's award-winning 8th Generation site technology utilizing Vector Engine-® BitBlast into a...
Read More »
BPM Microsystems to Highlight In-System Device Programming Solution at the Flash Memory Summit
HOUSTON - BPM Microsystems will showcase its model 2800ISP In-System Programming Station in Booth #808 at the upcoming Flash Memory Summit, scheduled to take place August 21-23, 2012 at the Santa Clara Convention Center in California. By incorporating its award-winning 8th Generation site technology utilizing Vector Engine-® BitBlast into a custom-designed test fixture, BPM Microsystems' 2800ISP...
Read More »InLine Onboard Programmer handles non-volatile memory devices.
Based on SCANFLEX-® architecture supporting Embedded System Access technologies, RAPIDO(TM) is designed for high-speed in-system programming of non-volatile memory devices such as Flash, serial EEPROM, MCUs, and PLDs. Model RPS900-S16 provides double-sided probing with up to 900 nail probes and gang programming of up to 16 sites. Supporting all ISP technologies based on embedded system access,...
Read More »
Choosing the Right Scrap & Chip Conveyor System
Understanding the different types of scrap and chip conveyors.
Read More »
BPM Microsystems to Demonstrate New Solution for in-System Device Programming at the 2012 SMT Hybrid Packaging Exhibition
HOUSTON - BPM Microsystems will demonstrate its new in-system device programming solution in Hall 7, Stand 648 at the upcoming SMT Hybrid Packaging Exhibition, scheduled to take place May 8 - 10, 2012 at the Exhibition Centre Nuremberg in Germany. The new 2800ISP Parallel In-System Device Programmer offers the unmatched performance and flexibility of 8th Generation site technology. With a...
Read More »
Data I/O Corporation's FLXHD Duplication System Selected by the Innovation Awards for the Rapidly Growing e-MMC Device Market
FLXHD is the only automated e-MMC duplication system in a desktop footprint REDMOND, Wash. - Data I/O Corporation (NASDAQ: DAIO), the leading provider of manual and automated device programming solutions, today announced that it has been awarded a 2012 EM Asia Innovation Award in the category of Programming Systems for its FLXHD e-MMC Duplication System. The award was presented to the company...
Read More »
Universal Device Programmer has 60,000 device output.
Supporting 60,000+ device algorithms, GALEP-5 weighs less than 200 g and leverages internal 200 MIPS ARM-9 processor that handles data transfer. Speed allows unit to double as fast production programmer in ganged arrays, and JTAG debugging capabilities enable use in MCU development. JTAG player can program SVF/JAM data into all existing and future devices that have JTAG port, while 50,000 gate...
Read More »In-Circuit Debugger supports testing and debugging in field.
Connecting seamlessly to Atmel AVR Studio 5 and all Atmel 8- and 32-bit AVR MCUs, JTAGICE3 can program on-chip 256 KB flash AVR MCU in less than 14 sec. Debugger also offers support for JTAG, aWire, SPI, and PDI serial program, as well as debug interfaces used in AVR MCUs. JTAGICE3 supports 3 hardware program breakpoints plus 1 maskable data breakpoint and up to 128 software breakpoints....
Read More »
Compact Universal Programmer tests variety of memory devices.
Model VP990 tests EPROMs, TTL/CMOS logic IC devices, dynamic or static memory devices, PROM, PLDs, Flash MCUs, and serial or parallel memory. When in auto-run mode, unit programs automatically upon detection of chip insertion and identifies manufacturer and type of device. It connects to computer via USB port, and it conducts poor pin contact check upon device insertion. Compatible with most...
Read More »Precise and Reliable Pemulator (Integrated Emulator and Programmer)
Toronto, Canada - GAO Embedded (www.GAOEmbedded.com) has announced the release of this pemulator (integrated emulator and programmer), which is a combination of both an emulator and programmer. This pemulator is equipped with abundant emulation and burn-in adapters. It boasts double CPUs and all of the features of MCU. The reliable pemulator provides various breakpoints including address, step...
Read More »
Krueger Sentry Gauge Announces the Release of Two New Chemical Sight Gauge Models Designed for Aggressive Liquid Storage Monitoring
Krueger Sentry Gauge, a leader in chemical sight gauges, now offers the ultimate in aggressive liquid storage monitoring devices. From sulfuric and hydrochloric acid to bleach, and acetone, our products are designed with robust features that deliver a long and trouble-free service life. See our video to learn all about this new and innovative line of sight gauges.
Read More »
