Embedded Processors meet SoC-centric design requirements.
Combining general purpose and DSP capabilities within hardware multi-threaded execution infrastructure, Series2 META 32-bit SoC processor IP cores promote optimal processor utilization and tolerance to SoC system latencies. Products deliver ability to respond to external event within one clock cycle while also providing Linux/Android applications processor platforms with coherent caches and MMUs....
Read More »Image Generator includes NVIDIA® Quadro® FX 5800 GPU.
Independence-® IDX 6000 Image Generator utilizes Mantis® shader-based real-time scene management software and QUEST2 with viXsen physics-based sensor processing to provide compatibility with existing image generators. Featuring NVSYNC(TM) precision synchronization technology, it supports high-resolution, multiple-input projectors. Various shader-based FAA Level D effects are supported. Unit...
Read More »Image Generator includes NVIDIA-® Quadro® FX 5800 GPU.
IndependenceÃ-® IDX 6000 Image Generator utilizes Mantisî shader-based real-time scene management software and QUEST2 with viXsen physics-based sensor processing to provide compatibility with existing image generators. Featuring NVSYNC(TM) precision synchronization technology, it supports high-resolution, multiple-input projectors. Various shader-based FAA Level D effects are...
Read More »Configurable DSP IP Cores target RTAX-DSP space-flight FPGAs.
Configurable DSP IP cores enable designers to create common DSP functions such as filters and transforms for RTAX2000D and RTAX4000D DSP FPGAs. They use GUI embedded in Libero-® IDE and are supported through comprehensive software dialog windows that simplify selection and configuration of common DSP functions. Units can also generate structural netlists in either Verilog or VHDL and can be...
Read More »
Glass Fabrication for MEMS Applications
Micro-electromechanical systems (MEMS) can be found in nearly every industry, such as the consumer electronics and semiconductor fields. Learn more about the technology and its applications.
Read More »Configurable DSP IP Cores target RTAX-DSP space-flight FPGAs.
Configurable DSP IP cores enable designers to create common DSP functions such as filters and transforms for RTAX2000D and RTAX4000D DSP FPGAs. They use GUI embedded in LiberoÃ-® IDE and are supported through comprehensive software dialog windows that simplify selection and configuration of common DSP functions. Units can also generate structural netlists in either Verilog or VHDL and can be...
Read More »National Semiconductor Introduces Industry's First 65 MHz, 24-Bit Color SerDes Family for Infotainment Displays
FPD-Link II Chipsets Deliver Scalable Solution for Full Range of Display Resolutions September 28, 2009 - National Semiconductor Corp. (NYSE: NSM) today introduced the industry's first serializer and deserializer (SerDes) chipsets capable of driving high-resolution, 24-bit color flat-panel displays with a 65 MHz clock. The two new additions to National's FPD-Link II SerDes chipset family deliver...
Read More »National Semiconductor Introduces Industry's First 65 MHz, 24-Bit Color SerDes Family for Infotainment Displays
FPD-Link II Chipsets Deliver Scalable Solution for Full Range of Display Resolutions September 28, 2009 - National Semiconductor Corp. (NYSE: NSM) today introduced the industry's first serializer and deserializer (SerDes) chipsets capable of driving high-resolution, 24-bit color flat-panel displays with a 65 MHz clock. The two new additions to National's FPD-Link II SerDes chipset family deliver...
Read More »Dataplane Core targets DSP applications.
Optimized for digital signal processing and control in system-on-chip dataplane, Xtensa LX3 DPU offers variety of pre-verified DSP options ranging from floating point accelerator to 16-MAC vector DSP. Base configuration can reach speeds over 1 GHz in 45 nm process technology with area of 0.044 mm-² and 0.015 mW/MHz power. When built with ConnX Baseband Engine DSP, Xtensa LX3 delivers over 10...
Read More »Dataplane Core targets DSP applications.
Optimized for digital signal processing and control in system-on-chip dataplane, Xtensa LX3 DPU offers variety of pre-verified DSP options ranging from floating point accelerator to 16-MAC vector DSP. Base configuration can reach speeds over 1 GHz in 45 nm process technology with area of 0.044 mmÃ-² and 0.015 mW/MHz power. When built with ConnX Baseband Engine DSP, Xtensa LX3 delivers over 10...
Read More »Six-Core Digital Signal Processor optimizes processing power, energy efficiency.
Targeted at process-intensive applications requiring low power consumption, TMS320C6472 features 6 high-speed C64X+ DSP cores running at 500, 625, and 700 MHz; up to 4.2 GHz/33600 MMACs; and 4.8 MB on-chip L1/L2 RAM. It delivers 3 GHz performance at 0.15 mW/MIPS, and architecture maximizes subsystem performance on chip. In addition to dedicated L1 and L2 memory to each core, C6472 features 768 KB...
Read More »
Precision Machined Parts for High Tech Applications
For precision and value that sets the standard for quality and craftsmanship, EGS Production Machining is the source for precision and value. Our extensive capabilities and dedication to customer service allow us to deliver the optimal manufacturing solution. See our video to learn more.
Read More »
