Hydraulic Cylinders for use in workholding applications.
Power Clamps

Hydraulic Cylinders for use in workholding applications.

Threaded body hydraulic cylinders can be used in clamping, positioning, punching, and pressing applications. Cylinders are available in capacities from 380 to 8800 lb of clamping force with stroke lengths from 1/4 to 2 in. Cylinder bodies are fully threaded and standard rod end threads enable use of standard contact bolts and accessories. Manifold mount cylinders mount directly into standard SAE...

Read More »
Cable Block is self-adjusting.
Blocks

Cable Block is self-adjusting.

Multi-angle, aerial cable block reduces friction when pulling cable around tight corners by adjusting itself from maximum 12 in. bending radius down to straight line. Pole-mounted corner block can be used in stringing applications that place cables up to 5 in. in diameter, such as 3 bundled 750 MCM cables. All-aluminum, heavy-duty block attaches to pole with inclusive steel chain binder.

Read More »
Print/Apply Systems have 64-bit microprocessor.
Labelers

Print/Apply Systems have 64-bit microprocessor.

ALX 924/926 Print-and-Apply Systems offer maximum print speed of 16 ips. They produce 1D and 2D bar codes, graphics, and human-readable copy on range of label materials at 300 dpi print resolutions. The system's 1000-meter ribbon supply permits extended operation without ribbon changes. ALX 924 and 925 have print widths of 4.2 and 5 in., respectively. Both handle label widths up to 5.2 in. ALX...

Read More »
Network Equipment

Analog I/O connects via network.

Additions to CompactBlock(TM) LDX I/O include analog and temperature blocks, plus networking. Analog blocks bring in current and voltage data from valves, pressure sensors, and related field devices. Temperature blocks accept signals from T/Cs and RTDs, and provide scaling for different device types allowing module to convert signal from any standard T/C or RTD into Fahrenheit or Celsius grade...

Read More »
Wax-Resin Ribbons brighten up labels and tags.
Office Machine Ribbons

Wax-Resin Ribbons brighten up labels and tags.

Sirius(R) C3 color wax-resin ribbons provide consistently clear print quality and high degree of scratch, smear, heat, and chemical resistance. They can print at speeds up to 10 ips and print on variety of substrates. Ribbons are available in red, blue, navy, green, forest green, brown, yellow, orange, maroon, purple, white, bronze, silver, and gold.

Read More »
Convertible Labeler offers versatility.
Labelers

Convertible Labeler offers versatility.

Convertible Labeler changes from label applicator to print and apply labeler in less than 15 minutes. Mini size accommodates 10 in. OD roll of labels and Standard size utilizes 16 in. rolls. Units include centralized keypad, screened label paths, and cantilevered printhead. Label sizes from .75 x .25 in. up to 4.1 x 14 in. can be applied.

Read More »
Rodless Cylinders are short, thin, and light.
Cylinders

Rodless Cylinders are short, thin, and light.

HORV Series are shorter, thinner, and lighter than company's conventional rodless cylinders of equal bore and stroke. Block type end cap eliminates need for mounting brackets and zero stroke dimension results in dead stroke that is 35% shorter than band-type rodless cylinders. Lightweight body places no loads on actuator axis or stand, even when using Y-Z axis. Cylinders are available with NPT...

Read More »
Duplicators

Optical Disc Duplicators work at 32x recording speed.

Composer-series optical disc duplicators have been upgraded from 24x to 32x recording speed, a 25% increase. Faster recording speed means that more discs per hour can be produced on duplicators: 650 MB CD-Rs can be recorded in as quickly as 3 min each. Models include Composer: 50 disc capacity, single drive; ComposerPlus: 100 disc capacity, single drive; ComposerPro: 100 disc capacity, dual...

Read More »
Marking System works with metal tags.
Writing and Drawing Markers

Marking System works with metal tags.

ProPoint(TM) Tag Marking System automatically feeds, marks, and ejects metal tags. It has conveying system that eliminates tag jamming, magazine capacity ranging from 90 to 225 tags, and can handle steel, stainless steel, brass, and aluminum materials. System marks area measuring 2 x 4 in. on tag sizes from 1 x 3 to 2 x 4 in. with print speed of three 0.125 in. dot-matrix font characters/sec. It...

Read More »

All Topics

COVID-19 Response Suppliers COVID-19 Response:
Can Your Company Help Provide Critical Supplies?

We are using the power of our platform to aid in the mass shortage of critical supplies. If your company can help provide supplies, capabilities, or materials for products such as N-95 Masks and Tyvek SuitsPlease let us know.

COVID-19 Response Suppliers