Pressure Washing Equipment

Pressure Washing Equipment

Multi-Mode Heated Pressure Washers support 100 yd distances.

While housed outdoors and available with 50 ft hose, Super Max(TM) 12500 GE uses long hose technology (LHT) to provide steady pressure over hose distances up to 100 yd for reaching indoors. Gasoline-powered power washer does not require electrical outlet, relying upon propane to heat water to 220°F and steam to 330°F. Featuring 18 hp engine with shaft-driven pump, 3-mode systems can...

Read More »
Pressure Washing Equipment

Pressure Washer accepts hoses up to 100 yards in length.

Electronically powered, propane-heated Super Max(TM) 12300 features Long Hose Technology, which allows user to place base heating/power unit outside and run hose indoors. Unit produces pressure levels up to 3,000 psi and flow rates of 5 gpm. Equipped with 10 hp NEMA motor, tri-mode system can clean with variety of temperatures, including steam. It is supplied with industrial caliber heater...

Read More »
Pressure Washers support hoses over 290 ft.
Pressure Washing Equipment

Pressure Washers support hoses over 290 ft.

With Long Hose Technology, pump and propane heating units of Super Max(TM) 12200 Pressure Washers can reside in exhaust-compatible space, while operator uses cleaning wand attached by hose more than 290 ft away. Units are powered by 230 V single-phase, 5 hp motor capable of generating 2,000 psi and up to 4 gpm of water flow. Able to clean with cold water, hot water, or moist steam, washers are...

Read More »
Stationary Pressure Washers support 300 ft hoses.
Pressure Washing Equipment

Stationary Pressure Washers support 300 ft hoses.

Available in 6 electric-powered models, Super Max(TM) 15000 Series includes Long Hose Technology, which generates consistent cleaning pressure along length of hoses measuring up to 300 ft. Models are rated at 1,000 psi/2 gpm, 700 psi/3 gpm, 1,000 psi/4 gpm, 1,500 psi/5 gpm, 2,000 psi/4 gpm, and 3,000 psi/5 gpm. Units are factory-configured to produce steam or hot water with variety of fuels...

Read More »
Pressure Washing Equipment

Aqua Miser Ultra Boss 2 Replaces US Army's Old Water Blasting System

Multiple benefits reported including deep reduction in monthly costs, budget relief and EPA friendly usage. The US Army replaced their old water blasting system with CESCO's Aqua Miser Ultra Boss 2. According to Kenny Collette of CESCO, the US Army is very pleased and told him the following: We have been using the Aqua Miser Ultra Boss 2 for some time now and have found a huge cost difference....

Read More »
Fuel-Heated Pressure Washers power hoses up to 300 ft long.
Pressure Washing Equipment

Fuel-Heated Pressure Washers power hoses up to 300 ft long.

Super Max(TM) 12800 series feature Long Hose Technology (LHT) architecture, which produces consistent pressure from beginning to end of hose as long as 300 ft. Functionality lets user position base unit of diesel fuel-, heating oil-, or gas-heated pressure washer in fume-friendly location and clean indoors with pressure nozzle 300 ft away. Available models can be powered by electricity or gas,...

Read More »
Portable Steam Cleaning & De-Icing
Pressure Washing Equipment

Portable Steam Cleaning & De-Icing

Beresford, South Dakota, USA - February 10, 2010 - Sioux Corporation, an industry leader in custom, application-specific pressure washers, steam cleaners and steam generators, is highlighting its trailer-mounted steam cleaners. These units are used worldwide for removing oil and grease from heavy equipment, thawing and de-icing equipment, pipes, valves, drains, and culverts in cold weather,...

Read More »
Sioux All-Electric E-Series Pressure Washers and Steam Cleaners Now Feature CE Mark
Pressure Washing Equipment

Sioux All-Electric E-Series Pressure Washers and Steam Cleaners Now Feature CE Mark

All the cleaning capabilities of a Sioux machine in a more compact, portable design Beresford, South Dakota, USA - Sioux Corporation's new line of 100% Electric E-Series pressure washers and steam cleaners now feature the CE Mark. This is a mandatory conformity mark on products in the European Economic Area. The CE Marking certifies that a product meets European Union consumer safety, health and...

Read More »
Precision Machined Parts for High Tech Applications
Sponsored

Precision Machined Parts for High Tech Applications

For precision and value that sets the standard for quality and craftsmanship, EGS Production Machining is the source for precision and value. Our extensive capabilities and dedication to customer service allow us to deliver the optimal manufacturing solution. See our video to learn more.

Read More »

All Topics