Pressure Transmitters

American Sensor Technologies Achieves ATEX Certification for Explosion Proof / Non-Incendive Pressure Transmitters
Pressure Transmitters

American Sensor Technologies Achieves ATEX Certification for Explosion Proof / Non-Incendive Pressure Transmitters

Mt. Olive, NJ –Â- American Sensor Technologies, Inc. (AST) has achieved ATEX certification of its Explosion Proof Pressure Transmitters for Class I Zone 0 Exd hazardous locations. The added approvals enhance the ability for equipment manufacturers to specify AST pressure transducers as the sensors can now operate in both North America and Europe. AST Explosion Proof Pressure Transducers...

Read More »
American Sensor Technologies Achieves IECex Certification for Intrinsically Safe and ATEX Certified Pressure Transducers and Transmitters
Pressure Transmitters

American Sensor Technologies Achieves IECex Certification for Intrinsically Safe and ATEX Certified Pressure Transducers and Transmitters

Mt. Olive, NJ – American Sensor Technologies, Inc. (AST) has achieved IECex certification for its intrinsically safe and ATEX certified pressure transducers and transmitters. In an effort to offer a global pressure sensing solution that addresses both regulatory and environment requirements to different geographic regions throughout the world, American Sensor Technologies continues to add...

Read More »
Rugged Pressure Transmitters withstand harsh environments.
Pressure Transmitters

Rugged Pressure Transmitters withstand harsh environments.

Respectively available with 3 mV/V, 0–5 Vdc,Â- 4–20 mA, and CANbus SAE J1939 signal outputs, Models 170, 270, 370, and 570 of WECO® Hammer Union Series address shock, vibration, and installation challenges of oilfield as well as other harsh industrial environments. Standard ranges are available from 0–1,000 psi to 0–20K psi, with standard accuracies of

Read More »
Low-DP Transmitter offers local display and 4-20 mA output.
Pressure Transmitters

Low-DP Transmitter offers local display and 4-20 mA output.

Mating 4-digit LCDÂ- and Ashcroft® stable, low-DP transmitter, GL42 provides local reading as well as 4–20 mA output. This allows communication with remote DAQ device as well as visual reading at pressure source. Along with selectable engineering units, features include adjustable display response times, IP65 enclosure, and several mounting...

Read More »
Differential Pressure Transmitters offer 3 selectable outputs.
Pressure Transmitters

Differential Pressure Transmitters offer 3 selectable outputs.

Equipped with 4-digit LCD that showsÂ- either static pressure or differential pressure, Series PX2600 features 4 unidirectional and 4 bi-directional ranges, pushbutton or remote zero, and 3 selectable outputs of 0–5 Vdc, 0–10 Vdc, or 4–20 mA 2-wire. Supplied in glass-filled polyester case, CE-compliant products are suited for building energy management systems, process control systems,...

Read More »
Load Cell Transmitter offers 0.01% accuracy.
Pressure Transmitters

Load Cell Transmitter offers 0.01% accuracy.

Housed in DIN-rail package, Laureate LTE-WM combines Ethernet I/O, isolated 0–10 V or 4–20 mA analog output, and dual 120 mA relays. Full-scale input range ±20 mV and 1 Â-µV resolution can be scaled internally to ±99,999 counts. Selected input range for full 4–20 mA output span can be as wide as ±99,999 counts or as narrow as 150 counts. Offering update rates of 50 or...

Read More »
DP Level Transmitter does not use impulse lines, capillary tubes.
Pressure Transmitters

DP Level Transmitter does not use impulse lines, capillary tubes.

Using Ceraphire ceramic sensor in pressure sensor modules, Deltabar FMD71 calculates differential pressure (DP) from 2 pressure sensor modules, each connected electronically to single transmitter, and transmits level, volume, or mass via 4–20 mA with HART as standard 2-wire, loop-powered device. Electronic system eliminates issues associated with impulse lines or capillaries, such...

Read More »
Pressure Transmitters

Transmitter enables dual parameter measurement and monitoring.

Able to integrate with existing monitoring system, PF4 series can be used for differential pressure (DP) andÂ- humidity/temperature measurement and monitoring. Transmitter, immune to dust and humidity, comes with optional connector for HC2-probes, integrated relay switch contact, and overload capabilities. Offering long-term stability, freely configurable analog signals, and selectable...

Read More »
Pressure Transmitters

Pressure Modules deliver reference class accuracy.

Comprising 48 models, 750P Series enables gage, differential, dual range, absolute, and vacuum pressure measurement with Fluke 750/740 Documenting Process Calibrators and 725/726 Multifunction Process Calibrators. Modules cover pressure calibrations from 0–1 in. H2O to 1,000 psi with 0.025% reference uncertainty. Supplied with NPT, metric (BSP), and M20 adapters, 750P Series communicates...

Read More »
Wireless Pressure Transmitter delivers 2 process variables.
Pressure Transmitters

Wireless Pressure Transmitter delivers 2 process variables.

Designed to directly measure differential and static pressure in one installation, Rosemount® 3051S MultiVariable™ Transmitter enables users to minimize pipe penetrations and impulse piping. Static pressure sensor is available as either true gage or absolute. With Smart Wireless field instrumentation, users have instant visibility of measurements through non-intrusive, WirelessHART®...

Read More »

All Topics

COVID-19 Response Suppliers COVID-19 Response:
Can Your Company Help Provide Critical Supplies?

We are using the power of our platform to aid in the mass shortage of critical supplies. If your company can help provide supplies, capabilities, or materials for products such as N-95 Masks and Tyvek SuitsPlease let us know.

COVID-19 Response Suppliers