Pressure Transmitter measures vacuum.
NIST-traceable Model FPV provides vacuum pressure measurements from 10 in. water to 15 psiv. Selectable parameters include choice of 0.1% or 0.25% accuracy, 6 electrical terminations, 6 pressure ports, and 0-5 Vdc, 0-10 Vdc, 2-wire 4-20 mA, or mV/V output. Long-term stability is 0.04% FS for 30 months. Certifications are available for CE and for intrinsically-safe installations.
Read More »
Pressure Transducer is based on silicon technology.
Model DCT combines pressure sensing with stainless steel construction, which allows it to operate under extreme environmental conditions. It is available in pressure ranges from 6 to 500 psi, and is fully digitally compensated for effects of pressure and temperature changes. Transducer accepts unregulated and regulated excitation voltages, and provides output signals such as 1-5Vdc, 1-6Vdc,...
Read More »Tactile Sensor System conforms to complex-shaped objects.
Model T-2000 tactile sensor system is based on PPS-proprietary TactArray technology, employing capacitive pressure sensors that continuously deliver accurate data after 1, initial calibration. One T-2000 can be configured with 16 to 256 sensor elements in array sizes up to almost 6 sq in. System specifications include full scale ranges of 3, 12, or 30 PSI, 0.15% static noise, and 1.0%...
Read More »Pressure Transducers withstand electromagnetic noise.
P321 OEM differential pressure transducers, available with pressure ranges from 0-5 PSI to 0-50 PSI (with 60 PSI operating line pressure), operate on 5 Vdc power supply, and provide 0.5 to 4.5 Vdc output. Housings are compatible with various liquids and gases, and may be specified with or without bracket assembly. Sensing technologies are repeatable, stable, and accurate, and are designed to...
Read More »
Caps & Plugs Designed for Peace of Mind
Download this engineering guide to learn more about the different caps and plugs offered, and to find the correct solution for your specific application.
Read More »
Pressure Transducers offer high precision static accuracy.
Series 35 KPSI(TM) transducers are available in titanium or stainless steel with fluorocarbon wetted surfaces. They offer user-specified pressure ranges from 0-2 psig to 0-300 psig with static accuracy of +/-0.05% FSO. Units include isolated diaphragm sensors designed for use with hostile fluids and gases. They provide standard voltage and current loop outputs and are 100% computer tested,...
Read More »
Pressure Sensors offer 1/4 NPT pressure fitting.
Series 121A20/30 industrial, dynamic ICP(R) pressure sensors are offered in full-scale ranges from 100 psi to 5000 psi, and offer all-welded, stainless-steel construction. Units contain built-in microelectronic circuitry, and provide electrical case isolation. Sensors are available with 2-pin military connector or integral, molded, submersible cable assembly. Units can detect very small pressure...
Read More »Pressure Transducers are suitable for flow measurements.
OEM Differential Pressure transducers measure flow in air, water, gas, air intake, exhaust gas, coolant, oil, fuel, and product mixing and blending applications. They can be specified with pressure ranges of 1 in. of water to 0-50 psid, operate on 5 Vdc power supply, and provide 0.5 to 4.5 Vdc output. Housings are compatible with many liquids and gases. Sensors withstand high temperature, shock,...
Read More »Pressure Sensors feature digital CANopen-BUS output.
Melt and Industrial Pressure Sensors with digital CANopen-BUS technology converts low signal pressure sensing elements from analog to digital, then processes further in intelligent microprocessor. Scanning and conversion rate of pressure signal is 20 milliseconds. Digital pressure signal with 13 bit resolution is continuous on 2-wire CAN-BUS connection, and is controlled and analyzed by CANopen...
Read More »
Tranducer Kit is fully re-rangeable.
DP15 Pressure Transducer Kit contains variable reluctance sensor with 10 replaceable sensing diaphragms, O-rings, bleed screws, gaskets, AC power adapter, CD379 portable indicator with LCD readout and cables. Diaphragms support full-scale ranges between -
Read More »Pressure Transducer has built-in static pressure tip.
Series 676 measures pressure in 3 field selectable pressure ranges with accuracy of -
Read More »
ISO-Certified J&D Tube Benders Delivers Rapid Tubeline Fabrication Services
J&D Tube Benders' laser cutting and machining services provide accurate and complex features on tubes of all shapes and sizes. Check out the video to learn more!
Read More »
