Pressure Sensors / Detectors / Transducers

Pressure Sensors / Detectors / Transducers

Electrochem Achieves Certification of Wireless Sensors for Use in Hazardous Environments

Electrochem announced today that its line of Wireless Pressure, Temperature and Flow Sensors have attained certification for use in hazardous environments from CSA International. The certification applies to US (Class I; Division 1; Groups A, B, C, D; T4) and Canada (Ex/AEx ia IIC T4). Specifically designed for rough and harsh environments, Electrochem's Wireless Sensor products are constructed...

Read More »
Pressure Transducer is shock and vibration protected.
Pressure Sensors / Detectors / Transducers

Pressure Transducer is shock and vibration protected.

(Amherst NY) Stellar Technology offers the Model GT32XX pressure transducer. This rugged, all-welded stainless steel sensor is shock and vibration protected to perform reliably in the most demanding applications. The GT32XX is environmentally sealed and performs over a range of -65 to +250°F (compensated: -30 to +170°F). Pressure ranges are available from 0-30,000 psi through 0-100,000 psig/a....

Read More »
Pressure Transducer is shock and vibration protected.
Pressure Sensors / Detectors / Transducers

Pressure Transducer is shock and vibration protected.

(Amherst NY) Stellar Technology offers the Model GT32XX pressure transducer. This rugged, all-welded stainless steel sensor is shock and vibration protected to perform reliably in the most demanding applications. The GT32XX is environmentally sealed and performs over a range of -65 to +250-°F (compensated: -30 to +170°F). Pressure ranges are available from 0-30,000 psi through 0-100,000...

Read More »
Low Pressure Sensing Die utilizes MEMS technology.
Pressure Sensors / Detectors / Transducers

Low Pressure Sensing Die utilizes MEMS technology.

Utilizing open bridge configuration, measuring 2 x 2 mm square, MEMS Piezoresistive Low Pressure Sensing Die is suited for high volume applications requiring pressure measurement to as low as -¼ in. of water full scale. By utilizing boss-less structure, position sensitivity is minimized to 0.1% in. H2O/g. Applications include HVAC variable air volume controls, automotive fuel vapor recovery...

Read More »
Low Pressure Sensing Die utilizes MEMS technology.
Pressure Sensors / Detectors / Transducers

Low Pressure Sensing Die utilizes MEMS technology.

Utilizing open bridge configuration, measuring 2 x 2 mm square, MEMS Piezoresistive Low Pressure Sensing Die is suited for high volume applications requiring pressure measurement to as low as Â-¼ in. of water full scale. By utilizing boss-less structure, position sensitivity is minimized to 0.1% in. H2O/g. Applications include HVAC variable air volume controls, automotive fuel vapor recovery...

Read More »
Level Sensor suits sludge, wastewater, and salt water applications.
Pressure Sensors / Detectors / Transducers

Level Sensor suits sludge, wastewater, and salt water applications.

Available with stainless steel housing and easy-to-clean, flush-mounted process diaphragm, Waterpilot FMX21 level sensor targets water and wastewater applications. KTW, NSW and ACS drinking water approved unit uses ceramic cell to measure pressure. Pressure changes bring change in capacitance, which is converted into 4-20 mA signal, linear to level of liquid by sensor's electronics. Suitable...

Read More »
Level Sensor suits sludge, wastewater, and salt water applications.
Pressure Sensors / Detectors / Transducers

Level Sensor suits sludge, wastewater, and salt water applications.

Available with stainless steel housing and easy-to-clean, flush-mounted process diaphragm, Waterpilot FMX21 level sensor targets water and wastewater applications. KTW, NSW and ACS drinking water approved unit uses ceramic cell to measure pressure. Pressure changes bring change in capacitance, which is converted into 4-20 mA signal, linear to level of liquid by sensor's electronics. Suitable...

Read More »
Touch-Sensor Controller Chip replaces buttons on electronic devices.
Pressure Sensors / Detectors / Transducers

Touch-Sensor Controller Chip replaces buttons on electronic devices.

Model STM8T141 touch sensor controller chip that is designed for main power-on/off control or to trigger wake-up from battery-saving sleep modes. Drawing current as low as 11 -µA from battery, 3 x 2 x 0.6 mm, 8-pin unit monitors single touch-sensing electrode embedded on control panel or outer casing of device. It supports proximity sensing, for control without direct contact from user, and...

Read More »
Touch-Sensor Controller Chip replaces buttons on electronic devices.
Pressure Sensors / Detectors / Transducers

Touch-Sensor Controller Chip replaces buttons on electronic devices.

Model STM8T141 touch sensor controller chip that is designed for main power-on/off control or to trigger wake-up from battery-saving sleep modes. Drawing current as low as 11 Â-µA from battery, 3 x 2 x 0.6 mm, 8-pin unit monitors single touch-sensing electrode embedded on control panel or outer casing of device. It supports proximity sensing, for control without direct contact from user, and...

Read More »
Pressure Transducer provides accuracy of 0.4%.
Pressure Sensors / Detectors / Transducers

Pressure Transducer provides accuracy of 0.4%.

Housed in 316 stainless steel, Model TDH-40 incorporates M12, 9.4 DIN electrical connection, which provides protection against water intrusion and enables use in harsh environments. Transducer offers direct plug-and-play replacement for retrofitting and is suited for hydraulic and pneumatic systems, food and beverage units, refrigeration systems, pumps and compressors, energy and water management...

Read More »
Cut and Bevel Pipe up to 63" Diameter with a Single Lightweight, Portable Machine
Sponsored

Cut and Bevel Pipe up to 63" Diameter with a Single Lightweight, Portable Machine

CS Unitec is a leader in power tools designed for industrial applications, with products that set the standard for robust performance and industry-leading reliability. Adding to our long list of innovation is a new line of pipe cutting machines. For cutting and beveling pipe up to 2" in thickness and diameters from 12" to 63", no other cutting system comes close. See our video to learn more.

Read More »

All Topics