Pressure Sensors / Detectors / Transducers

Pressure Transducer features no internal dead volume.
Pressure Sensors / Detectors / Transducers

Pressure Transducer features no internal dead volume.

Suited for in-line installation, Model DF2 thru-FLO(TM) has one-piece sensing element with no internal cavities to eliminate possibility of trapped particles or contaminants and ensure no interruption to system flow. Design is offered in various materials and non-metallic coatings and has integral circuit conditioning, amplification, and temperature compensation. With combined linearity and...

Read More »
Pressure Sensors are offered in ranges from 100-5,000 psi.
Pressure Sensors / Detectors / Transducers

Pressure Sensors are offered in ranges from 100-5,000 psi.

Featuring sensitivities from 1-50 mV/psi (±20%), Series 121A20/30 industrial, dynamic ICP® pressure sensors detect pressure fluctuations in presence of high static background pressures. Sensors have all-welded, hermetically sealed stainless-steel construction and 1/4 NPT pressure fitting, with electrical case isolation shielding against EM fields, eliminating ground loop problems....

Read More »
Pressure Regulator withstands harsh environments.
Pressure Sensors / Detectors / Transducers

Pressure Regulator withstands harsh environments.

Housed in NEMA 4X enclosure, Type 900X current-to-pressure (I/P) and voltage-to-pressure (E/P) transducer is available with zero-based units ranging from 0-7.5 to 0-60 psi outputs. Output pressures of up to 100 psig can be direct/reverse acting, full/split rangable, and do not need pre-regulation. Compliant with ATEX directive 94/9/EC, unit provides accuracy of ±0.1% of span. Modular design...

Read More »
Pressure Sensors / Detectors / Transducers

Sensor System Solutions, Inc. (3S) Reintroduces the 5100 Series Pressure Transducer Line

IRVINE, CA., September 1, 2006 - Sensor System Solutions, Inc.(3S) (OTC:BB SSYO), a manufacturer of (MEMS) sensors, intelligent sensor interface electronics and intelligent embedded control systems, today reintroduced its Pressure Transducer Model 5100 series which is targeted to the Oil Burner, HVAC, Oil Tank Level Indicator, Process Control System, Natural Gas Production, Gas Compressor, Fuel,...

Read More »
Pressure Sensors are available in ranges of 10 or 3.33 psi.
Pressure Sensors / Detectors / Transducers

Pressure Sensors are available in ranges of 10 or 3.33 psi.

Series 103B ICP® Acoustic Pressure Sensors are offered in pigtail wire solder connection, 10-32 top connector, and 3-56 side connector configurations and are used to measure pulsating, transient, and turbulent acoustic phenomena on transportation vehicles and other structures. Available in sensitivities of 500 or 1,500 mV/psi, sensors have rise time of ≤25 Â-µs and feature built-in...

Read More »
Pressure Sensors target steel and aluminum industry.
Pressure Sensors / Detectors / Transducers

Pressure Sensors target steel and aluminum industry.

Available in pressure ranges up to 10,000 psi, Series AST47SM features 1-piece sensing element, and has no silicone oil, welds, or O-rings, eliminating chance of contamination. Stainless steel housing welded to sensing element and cable connection withstands system washdowns. Stress-reduced diaphragm withstands high-pressure spikes, while internal restrictor maintains frequency response of 1 kHz....

Read More »
Pressure Sensor replaces Honeywell/Sensym ASCX Series.
Pressure Sensors / Detectors / Transducers

Pressure Sensor replaces Honeywell/Sensym ASCX Series.

Offered as drop-in replacement, ASCX Series Compatible pressure sensor is designed to reduce package-induced parasitic stress and strain. Pressure ports, mounting holes, and pin geometry are mechanically compatible to Honeywell ASCX Series pressure sensor, allowing substitution without mechanical restraints. Featuring 4-pin out design, product is available in pressure ranges from 1-100 psi and...

Read More »
Fingertip Sensors measure difficult-to-gauge pressures.
Pressure Sensors / Detectors / Transducers

Fingertip Sensors measure difficult-to-gauge pressures.

Worn on person's fingertips and palm, FingerTPS(TM) measure pressure exerted while person uses tool or performs some other action. Based on capacitive sensor technology, units measure pressures up to 10 lb in 0.1 lb increments. Sensors are less than 2 mm thick and are mounted in stretchable fabric for snug fit on user's fingers. USB-powered for Windows PCs, systems are supported by PC-resident...

Read More »
Pressure Transducers tolerate spikes without damage.
Pressure Sensors / Detectors / Transducers

Pressure Transducers tolerate spikes without damage.

Schaevitz® Bonded Foil Strain Gages are available in 0-75 to 10,000 psi and temperature range of -65 to 250Â-ºF, compensated to -4 to 185ºF. Pressure transducers feature Over Travel Stop for diaphragm, which enables sensor to handle at least 5x full scale over-range pressure spikes without damage or drift. Design affords thermal isolation to high temp transients, shock loads,...

Read More »

All Topics