Sensor measures water pressure and inflow temperature.
Compact, dual-function FS300-100 Combi-sensor is suited for use in boiler systems. Sensor incorporates analog pressure and temperature output that allows system fine tuning in conjunction with electronic control. It utilizes ASIC-controlled pressure sensing element and has pressure range of 0-3 bar relative, overpressure of 6 bar, and burst pressure of 10 bar. Operating temperature is 41 to...
Read More »Pressure Transducer handles harsh environments.
With hermetically sealed, piezoresistive sensing element, AS-PT Pressure Transmitter has no moving parts and is suited for liquid and gas service. It operates with integral or remote electronics that provide output signal directly proportional to pressure in process-control loop. Accurate to +1% of reading, unit senses changes in pressure within 0.5 sec. It operates from -40 to +257Ã-
Read More »Pressure Sensors feature solid-state design.
Series ICPÃ-® Dynamic Pressure Sensors measure low-level pressure and high-intensity sound pressure levels, both acoustic and ultrasonic. Models 106B50, 106B51, and 106B52 feature built-in signal conditioning microelectronics to produce low-impedance voltage output signals, and have sensitivities of 500, 1,000, and 5,000 mV/psi, respectively. All-welded, stainless steel units are suited for...
Read More »Stainless Steel Pressure Sensors measure hostile media.
Made of 17-4 PH or 316 L stainless steel, Series AST 4000 isolated pressure sensors are resistant to media corrosion. They contain no silicone oil, welds, or internal O-rings, offering hermetic seal. Units provide gauge, sealed-gauge, or compound-gauge pressure measurement in ranges up to 10,000 psi with mV or amplified outputs. Accuracy is less than +0.5% BFSL at 77Ã-ºF, and long-term...
Read More »Why Use A Locking Cord?
Learn about the benefits of using locking cords in applications that rely on extensive technological infrastructures.
Read More »Pressure/Temperature Sensor has CAN protocol interface.
Suited for applications requiring CAN BUS interface, Model CS100 meets SAE J1939 communication standard. It combines ceramic capacitive sensing element, brass housing, stainless steel outer housing, and MIL-C-26482 connector. Used in wet or dry applications, sensor may be specified as gage or absolute and is available in ranges up to 300 psi. Unit operates from 5 Vdc -±0.25 V with temperature...
Read More »Pressure Transmitter/Transducer is accurate to -
Constructed from all-welded stainless steel, Model BDR universal pressure transducer/transmitter handles any process gas or fluid. It features configurable electrical connections that maximize adaptability to varied applications and delivers accuracies of Ã-
Read More »Safety Edge Sensor has compact profile.
Measuring Ã-½ in. wide and 5/16 in. high, TS-3 Micro Sensing Edge is resistant to water, oil, gasoline, hydraulic fluids, and coolants. With sensitivity of 3 lb, switching element is rated for 3 million operations at any point. Applications include pinch point protection, impact detection, and patient location on medical tables. It is also suitable for pressure-sensitive detection, signaling,...
Read More »Pressure Sensors utilize piezoelectric sensing elements.
Series 111/112/113 sensors utilize ICPÃ-® or charge output pressure sensors, structured with piezoelectric stable quartz sensing elements, to measure changing pressure fluctuations over amplitude and frequency range. Features include solid-state construction, hermetically-sealed housings, and laser-welded flush diaphragms. Pressure sensors are available with dynamic ranges to 20,000 psi,...
Read More »Differential Pressure Sensor facilitates part molding.
Machine or mold mount, Lynx Delta LS-DP-100 is used with eDART System(TM) to measure difference in coolant pressure between mold inlet and outlet. Alarms can be set, allowing user to detect abnormalities in cooling lines, ranging from small blockage to complete line failure.
Read More »Pressure Transducer suits low-pressure applications.
Available in 0-0.5 through 0-5 psid/psig pressure ranges, P356 features brass, Ã-¼ in. male NPT pressure port and corrosion-resistant, alumina ceramic diaphragm. Sensor features EMI/RFI protection and is over-voltage, reverse polarity, and short-circuit protected. Excited by 5 Vdc, unit provides 0.5-4.5 linear signal output proportional to pressure. Unit also incorporates variable capacitance...
Read More »Standex Engraving Mold-Tech Offers Nickel Shell Capabilities on a Global Scale
Standex Engraving Mold-Tech is the premier, global supplier for mold texturing and surface finishing. With a full range of services, Standex Engraving Mold-Tech is also the only nickel shell supplier producing in three global locations. See our video to learn more.
Read More »