Molding Pressure Sensors use single wire technology.
With respective front diameters of 4 and 6 mm, models 6157B and 6152A use single wire technology to speed in-the-mold pressure sensor installation for large plastics molds. Handling wire lengths up to 5 m, procedures such as shortening cables and attachment to connectors are accomplished without soldering. Push-on connectors enable slipping-in stripped wires to make connections. Sensors are...
Read More »
Pressure Sensor operates in hostile hydrogen applications.
Exhibiting resistance against hydrogen permeation and embrittlement, Model 4600 ExplosionProof Pressure Sensors install directly on outlet valve to perform condition monitoring. Construction includes 316L stainless steel wetted parts and one-piece 316L diaphragm free of internal O-rings, welds, or fill fluids. Product, offered with outputs of 0.5-4.5 V ratiometric, 1-5 V, 1-6 V, .25-5 V, or 4-20...
Read More »
Pressure Sensors come in 2 miniature size packages.
Featuring Wheatstone bridge construction, silicon piezoresistive technology, and ratiometric output, Series HPX is suited for applications using non-corrosive, non-ionic working fluids. Gage devices come in 6-pin Dual-Inline package, while absolute devices come in 8-pin, surface-mount SOIC package. Both are non-amplified and non-calibrated. Units offer pressure ranges from 0-100 psi, operating...
Read More »
Electro-Pneumatic Transducer is approved for natural gas.
Featuring explosion-proof, NEMA 4X/IP66 housing, Type i2P-100 converts mA input signals to switch selectable proportional pneumatic output signal. Dual compartments have explosive fluid seal between explosive/corrosive process fluid and electronics. Integral pneumatic relay provides capacity necessary to drive pneumatic control valve/actuator assemblies without additional volume boosters or...
Read More »
The Ultimate Guide to Enclosed Tubular Drag Cable and Disc Conveyors
This whitepaper provides a comprehensive overview of enclosed tubular drag cable and disc conveyors.
Read More »
Pressure Sensors detect pulsations, surges, and leaks.
Series 121 dynamic ICP-® pressure sensors detect very small pressure fluctuations in presence of high static background pressures. Offered in full scale ranges from 100-5,000 psi, they contain built-in microelectronic circuitry to deliver clean voltage output signal. Hermetically-sealed, stainless steel units feature -¼ NPT or straight metric M14 mounting thread, and are available with 2-pin...
Read More »
Pressure Transducer is available with four-pin connector.
Model 8530C miniature, piezoresistive pressure transducer offers full-scale output of 225 mV. Suited for blast test applications, protective coating eliminates photoflash sensitivity and provides particle impingement protection. Coating does not degrade dynamic response characteristics of transducer, which is available in ranges from 15 to 100 psia. Its four-arm strain gage bridge is ion...
Read More »
Pressure Sensor suits high-static/low-flow measurements.
Available in gauge or differential pressure, unidirectional or bidirectional operations, LPM/LPX 9000HLP Series low-differential pressure sensor offers static line pressure up to 10,000 psi. Watertight series measures differential or relative pressures of corrosive and non-corrosive gases and liquids in ranges between -
Read More »
Barometric Pressure Sensor suits on/off-highway vehicles.
Model P4050 withstands hostile environments, high vibration, and broad temperature range found in vehicle engine and powertrain applications. With its composite housing, piezoresistive sensor operates in temperatures of -40 to +125-
Read More »
Pressure Sensor has two outputs.
Model DS pressure sensor provides RS485 or RS232 output capable of 380 readings/second and 0 to 5 Vdc analog output with frequency response rated to 1200 Hz. All-welded stainless steel construction is suited for factory floor or test cell installation. Model DS has combined accuracy of -
Read More »
Pressure Sensors detect high intensity acoustics.
Series 106 and 116 can measure low-level pressure and high-intensity acoustic and ultrasonic sound pressure levels. Both have solid-state construction, no moving parts, stainless steel housings, high frequency range, and up to 500 mV/psi sensitivity. Applications include monitoring pulsations, turbulence, and noise in hydraulic and pneumatic systems; detecting pressure fluctuations in...
Read More »
Aerzen USA Process Gas Blower and Compressor Installations Worldwide
Aerzen is firmly established as a global leader in compressed air, gas, and vacuum solutions. Our reputation as an industry leader is built on consistently delivering innovative products that are at the cutting edge of technology. To learn about the industries finest blowers and oil-free and oil-injected screw compressors, see our video.
Read More »
