Pressure Sensors are rated up to 60,000 psig.
AST47HP Series Pressure Sensors incorporate 1-piece stainless steel sensing element that is free of silicone oil, welds, and O-rings, eliminating contamination from outside media. Units are rated for over 100 million pressure cycles and have 100 V/m EMI/RFI protection. Operating from -40 to 185Â-
Read More »Heat Transfer Inc. Knows Its Boilers can Take the Pressure Thanks to Setra Transducers
Steve Asselin, a project manager and specialist in automated test measurement, came to Heat Transfer Products, Inc. of East Freetown, MA with his initial assignment being to design a production line for the company's Munchkin(TM) water heaters. Since 1973, Heat Transfer Products has been one of the Northeast's leading manufacturers of water tanks and water heating appliances for residential,...
Read More »Pressure Transmitters suit sanitary applications.
Two-wire, loop-powered PI Series includes models to monitor pressure ranges from full vacuum to 363 psig. Four-digit integrated LED display provides continuous indication of pressure value. Made of 316 SS, IP69K-rated units withstand high-pressure cleanings and extreme washdown conditions. With integrated temperature compensation, transmitters experience minimal signal drift. They offer accuracy...
Read More »Pressure Transducer features no internal dead volume.
Suited for in-line installation, Model DF2 thru-FLO(TM) has one-piece sensing element with no internal cavities to eliminate possibility of trapped particles or contaminants and ensure no interruption to system flow. Design is offered in various materials and non-metallic coatings and has integral circuit conditioning, amplification, and temperature compensation. With combined linearity and...
Read More »Screen Printing vs. Digital Printing: Five Key Decision Factors
Learn about the key factors for deciding between screen printing and digital printing.
Read More »Pressure Sensors are offered in ranges from 100-5,000 psi.
Featuring sensitivities from 1-50 mV/psi (Â-
Read More »Pressure Regulator withstands harsh environments.
Housed in NEMA 4X enclosure, Type 900X current-to-pressure (I/P) and voltage-to-pressure (E/P) transducer is available with zero-based units ranging from 0-7.5 to 0-60 psi outputs. Output pressures of up to 100 psig can be direct/reverse acting, full/split rangable, and do not need pre-regulation. Compliant with ATEX directive 94/9/EC, unit provides accuracy of Â-
Read More »Pressure Transducers employ aerospace silicon technology.
Offering choice of absolute pressures from 5-300 psi and gauge pressures from 1-10,000 psi, PX309 Series provides output ranges of 0-100 mV, 0-5 Vdc, and 4-20 mA. Compatible with most process control equipment, oil-filled, stainless steel units feature durability for industrial applications. Connection styles include 1.5 m cable, mini DIN, and military-style twist-lock.
Read More »Sensor System Solutions, Inc. (3S) Reintroduces the 5100 Series Pressure Transducer Line
IRVINE, CA., September 1, 2006 - Sensor System Solutions, Inc.(3S) (OTC:BB SSYO), a manufacturer of (MEMS) sensors, intelligent sensor interface electronics and intelligent embedded control systems, today reintroduced its Pressure Transducer Model 5100 series which is targeted to the Oil Burner, HVAC, Oil Tank Level Indicator, Process Control System, Natural Gas Production, Gas Compressor, Fuel,...
Read More »Pressure Sensors are available in ranges of 10 or 3.33 psi.
Series 103B ICPÂ-® Acoustic Pressure Sensors are offered in pigtail wire solder connection, 10-32 top connector, and 3-56 side connector configurations and are used to measure pulsating, transient, and turbulent acoustic phenomena on transportation vehicles and other structures. Available in sensitivities of 500 or 1,500 mV/psi, sensors have rise time of ≤25 Â-µs and feature built-in...
Read More »Pressure Sensors target steel and aluminum industry.
Available in pressure ranges up to 10,000 psi, Series AST47SM features 1-piece sensing element, and has no silicone oil, welds, or O-rings, eliminating chance of contamination. Stainless steel housing welded to sensing element and cable connection withstands system washdowns. Stress-reduced diaphragm withstands high-pressure spikes, while internal restrictor maintains frequency response of 1 kHz....
Read More »Simple Connection – MGB with EtherNet/IP
The new MGB with EtherNet/IP is a leap forward in access door safety. Designed for easy installation, flawless performance, and long service life, it is engineered with robust features and cutting-edge technology that places it firmly at the leading edge of the door safety device industry. To learn all about the benefits of the Euchner MGB, see our video.
Read More »