Electronic Pressure Regulator features ATEX compliance.
Miniature Electropneumatic Type-550X converts variable signal to proportional pneumatic output. Built-in volume booster provides up to 20 scfm air flow capacity. Standard and zero-based units utilize input signal of 4-20 mA. Output pressure for standard range includes 3-15, 3-27, 6-30, 2-60, and 3-120 psig, while zero-based range outputs include 0-30, 0-60, and 0-120 psig. Regulator features NEMA...
Read More »
Diaphragm Vacuum Regulator has ultra-miniature design.
With body height of 35/64 in., single-stage VRD-ANB-CD features design that permits in-line mounting without need for panel mounting; panel mount thread is optional. Product weighs 30 g in brass and stainless steel and features 10-32 UNF inlet and outlet ports as well as Buna-N seals. Suited for low-vacuum regulation, such as --½ psig, regulator controls output vacuum from 0 psig to full vacuum.
Read More »
Pressure Regulator targets space critical applications.
Diaphragm pressure regulator Model PRD controls output pressures from 0-40 psig, with maximum rated inlet supply pressure of 300 psig. Both inlet and outlet ports are tapped 10-32 UNF. Suited for gas and pnemuatic applications, non-relieving, single-stage regulator is offered in brass, anodized aluminum, 303 stainless steel for corrosion resistance, and 316 stainless steel for high purity...
Read More »
Filter/Regulator/Lubricator fits in tight spaces.
Series 07 removes liquid and solid particles down to 5 microns and provides airline lubrication to one or more air-driven devices or tools. It features push-to-lock adjusting knob coupled with tamper-resistant option. Available in 1/8 or -¼ in. port sizes, FRL is suited for operating temperatures of 0-125-
Read More »
The Benefits of Polymer Coatings in Tribology
This white paper provides an in-depth review of how polymer coatings are beneficial in tribology.
Read More »
Pressure Regulator utilizes closed-loop technology.
Housed in IP65 enclosure, Series QPV provides high resolution pressure control. Output pressure is proportional to electrical command signal input and is unaffected by changes in supply pressure. Pressure is controlled by 2 solenoid valves; inlet valve operates proportionally to flow required to maintain system pressure. Variable orifice effect allows precise control of pressure at low flow...
Read More »
Electronic Pressure Regulator uses O-rings for seat.
Model QB3 incorporates electronic pressure sensor that detects downstream pressure at work port for accurate regulation. Replaceable O-rings for intake and exhaust valve are set into groove that captures O-ring, but leaves room to move slightly and seal correctly for positive shut-off. Regulator accepts 0-10 V or 4-20 mA command signal and provides analog output that corresponds to actual...
Read More »
Laser Regulator maintains beam-mode quality.
Incorporating M2 technology, Series 601 eliminates atmospheric contamination during resonator gas cylinder exchange. Smooth flow paths do away with dead space as potential entrapment sites for moisture or hydrocarbons, facilitating stable emission. With operating temperature of -40 to 140-
Read More »
Filter/Regulator/Lubricator cleans machine airflow.
Filter unit is provided with sintered-bronze element, which varies in micron as per degree of purity to be achieved in filtration. Shield and separator arrangement ensure separation of condensed water/oil particles. Diaphragm-operated, self-relieving regulator has balanced poppet and flow-sensing venturi. Mist-type lubricator enables proportionate lubrication of airflow. Both filter and...
Read More »
FRL offers precise pressure control.
Modular Filter/Regulator/Lubricator (FRL) Series features port sizes ranging from 10/32 unf through 1 in. in NPT, metric, and G threads. Standard operating pressures are 0-145 psig with proof pressures of 215 psig. Regulator improves relief sensitivity from 14.5 psi to less than 5 psi, while increasing resistance to ozone. Built-in pressure gauge is standard. Lubricator has combination sight...
Read More »
Pressure Regulator utilizes DeviceNet(TM) protocol.
Multi-Station, Digital-to-Pneumatic Type 5500 uses common air supply to provide electronic proportional control of output pressure from any combination of 4, 6, or 8 station units through use of DeviceNet communication protocol. Output ranges include 3-15, 3-27, 6-30, 2-60, and 3-120 psig. Maximum supply pressure is 150 psig, and temperature limits range from -20 to 150-ºF. Built-in volume...
Read More »
DoorKing's 1601 Lane Barrier Provides a Higher Level of Traffic Control for Less
DoorKing is proud to introduce an easy add-on to its 1601 Barrier Gate Operator: The 1601 Traffic Lane Barrier. The barrier gate provides greater traffic control while eliminating the need for bollards or crash beams. Check out this video to learn more.
Read More »
