Presses

Flexo Press handles all types of web packaging.

Integrated with continuous or intermittent motion packaging systems, TruFlex UV provides in-line printing of text, barcodes, and graphics in registered or random format. Solvent-free inks cure in milliseconds when exposed to integrated UV curing system. Overprint registration control enables additional information to be printed onto pre-printed webs, while precision index feature provides for...

Read More »
Ironworker offers 85 ton capacity punch.

Ironworker offers 85 ton capacity punch.

Dual Operator Hydraulic Ironworker, Model 8514-20M features 14 in. throat depth and can punch 1 1/16 in. hole in 1 in. material. Two pumps insure full hydraulic pressure and speed to both operations. Machine includes 6 x 6 x Â-½ in. angle shear, rod shear for round and square rod up to 1Â-½ in. capacity, and rectangular notcher that can notch 2 x 4 in. through Â-½ in. material. Flat...

Read More »
Ironworker provides 50 tons of pressure.

Ironworker provides 50 tons of pressure.

Model 5014 CM punches 13/16 in. hole in Â-¾ in. material, 1Â-¼ in. hole in Â-½ in. material, and up to 2Â-¼ in. hole in Â-¼ in. material, using 4 x 6 in. die holder. It includes adjustable stroke control, electrical box with emergency palm button, lock-out/tag-out accommodations, 230/460 V 3-phase electrics, and keyed punch ram. Angle shear will shear up to 4 x 4 x 3/8 in. at...

Read More »
Press is designed for heavy blanking applications.

Press is designed for heavy blanking applications.

HeviBlanker press series is targeted for manufacturers with high-speed, high-tonnage, and high-material strength blanking applications. It comes with vibration monitoring alarm system that identifies conditions that might cause unnecessary harm to tooling, building, and surrounding equipment. Press frame is designed to reduce stress in drivetrain and dampen vibration. Series protects tooling and...

Read More »
Hydraulic Straightside Presses are suited for metalworking.

Hydraulic Straightside Presses are suited for metalworking.

Suited for pressworking applications from metalworking to compression molding of plastic, rubber, and composite materials, D and M Series are offered with respective capacities of 150-3,000 and 100-1,000 ton. D Series incorporates 2-point design with open height, while M Series employs rigid, box-type, single-point design. Both presses are built with 8-way gibbing system. Servo hydraulic cushion...

Read More »
Crimping Press accepts mini-style applicators up to 10 AWG.

Crimping Press accepts mini-style applicators up to 10 AWG.

Model ECM 550 3.3 ton press offers adjustable shut height and 4 crimping speeds. Integrated safety shield protects operators and opens completely to facilitate exchange of applicators. For quality assurance, optional crimp-force monitor can be added and integrated into complete quality network with pull test and crimp height measurement devices.

Read More »

Hydraulic Stamping Presses offer 3 minute die change.

Available in 75, 110, 175, and 250 ton capacities with 8-12 in. stroke, Series OBS allows blanking, forming, drawing, punching, and crimping, all on same machine. Hydraulic valves and electronic control enable high cycling speeds. Standard CNC controller with program storage allows accurate setups on repeat jobs. Presses accept manual or coil feed and feature virtually infinite stroke length...

Read More »
Assembly System is plug-and-play ready.

Assembly System is plug-and-play ready.

ServoPress System, Model 405/4000, features 100% in-process control and monitoring with 180 lb peak load and 115 lb continuous duty load. Industrial servo actuator offers up to 5.9 in. ram stroke and max ram speed of 11.8 ips, while spindle assembly features load cell and mechanical clutch. Equipped with .000004 in. resolution encoder, system uses precision ground ball screw with direct motor...

Read More »
Toggle Press is offered in 2-40 ton models.

Toggle Press is offered in 2-40 ton models.

THIN Air Powered Toggle Press features reduced compressed air consumption, accomplished via Piston Arm and force multiplying Toggle Link design. Presses are available in 1, 2, 5, 10, 20, and 40-ton models with mounting options such as Bench, Floor, and Tool mounts. Uses include Clinching, Piercing, Riveting, Stamping, and Bending. Featuring close stacking capability, press offers options such as...

Read More »
Hydraulic Presses feature heavy-duty construction.

Hydraulic Presses feature heavy-duty construction.

Series OBM and OBL, offered in respective 100-500 and 200-1,000 ton models, feature interlocked steel design that absorbs and evenly distributes full force capacities. Self-contained hydraulic system delivers automatic cylinder synchronization, overload protection, automatic decompression, and 3 advance speeds. PLC has programmable interface and 2-line display and keypad, while built-in...

Read More »

All Topics