Buck-Boost DC/DC Converter has single-inductor design.
With rated efficiency up to 98%, synchronous LTC3789 operates using single inductor with 4-switch synchronous rectification and can deliver output power up to 150 W. IC operates with selectable fixed frequency from 200-600 kHz and can be synchronized to external clock over same range with its integrated PLL. With 4-38 V input and 0.8-38 V output ranges, product employs current-mode control...
Read More »
DIN Rail Power Supplies provide 20 A/24 Vdc output.
Featuring space-saving 130 x 220 x 90 mm design, 208 V, 3-phase XCSG20R Series is equipped with both output overload and short circuit protection. Units include power loss alarm, front panel LED status indication, and adjustable output. Housed in touch-safe enclosures, power supplies are 100% factory tested and are suitable for SELV and PELV circuitry in industrial control applications.
Read More »
DIN Rail Power Supplies provide 20 A/24 Vdc output.
Featuring space-saving 130 x 220 x 90 mm design, 208 V, 3-phase XCSG20R Series is equipped with both output overload and short circuit protection. Units include power loss alarm, front panel LED status indication, and adjustable output. Housed in touch-safe enclosures, power supplies are 100% factory tested and are suitable for SELV and PELV circuitry in industrial control applications.
Read More »
Automotive-Grade Step-Down Converters consume 25 µA at no load.
o The MAX16903/MAX16904 are 42V-tolerant, 2.1MHz, synchronous step-down converters that use only 25microamps (no load) of quiescent current and deliver 1A and 600mA, respectively. o The integration of both the high- and low-side FETs enable the devices to operate without an external Schottky diode, thus saving cost and board space while improving efficiency. o The devices are capable of running...
Read More »
Design Guide: Heat Sinks for High-Power Applications
Without appropriate thermal management, electronic components will degrade over time, causing problems ranging from minor errors to critical failures.
Read More »
Automotive-Grade Step-Down Converters consume 25 -µA at no load.
o The MAX16903/MAX16904 are 42V-tolerant, 2.1MHz, synchronous step-down converters that use only 25microamps (no load) of quiescent current and deliver 1A and 600mA, respectively. o The integration of both the high- and low-side FETs enable the devices to operate without an external Schottky diode, thus saving cost and board space while improving efficiency. o The devices are capable of running...
Read More »DC-DC Switching Regulators suit noise-sensitive applications.
Montreal, Canada - Aimtec expands its line of DC/DC switching regulators with the launch of two new series: AMSR1.5-78-NZ and AMSR2-78-NZ (AMSRx-78-NZ). Feature rich and pin-to-pin replacements of 78xx linear regulators, the AMSRx-78-NZ switching regulators provide highly regulated (±1%) output voltages ranging as low as 2.5VDC up to 6VDC. Maximum output currents of 1.5A or 2A are produced at...
Read More »DC-DC Switching Regulators suit noise-sensitive applications.
Montreal, Canada - Aimtec expands its line of DC/DC switching regulators with the launch of two new series: AMSR1.5-78-NZ and AMSR2-78-NZ (AMSRx-78-NZ). Feature rich and pin-to-pin replacements of 78xx linear regulators, the AMSRx-78-NZ switching regulators provide highly regulated (-±1%) output voltages ranging as low as 2.5VDC up to 6VDC. Maximum output currents of 1.5A or 2A are produced at...
Read More »DC/DC LED Drivers provide 97% efficiency.
Up to 1000mA(output current) 8:1 (input range) 97% (efficiency) Montreal, Canada - With the release of AMLD-Z, Aimtec launches the third series in its line of DC/DC LED Drivers. Offered in a DIP24 packages, the AMLD-Z are feature rich LED drivers that meet the rigorous demands for environment friendly LED lighting solutions. From a wide (8:1) input range of 7 -60VDC, the AMLD-Z series of LED...
Read More »DC/DC LED Drivers provide 97% efficiency.
Up to 1000mA(output current) 8:1 (input range) 97% (efficiency) Montreal, Canada - With the release of AMLD-Z, Aimtec launches the third series in its line of DC/DC LED Drivers. Offered in a DIP24 packages, the AMLD-Z are feature rich LED drivers that meet the rigorous demands for environment friendly LED lighting solutions. From a wide (8:1) input range of 7 -60VDC, the AMLD-Z series of LED...
Read More »
DC/DC Converters deliver 30 W of regulated output power.
ConTech, a Division of Calex, announces the KMW" Series of DC/DC converters. The KMW Series offers up to 30 Watts of fully regulated output power with an industry standard 2 x 1.6" footprint. The series offers a 4:1 input range with nominal input voltages of 24VDC and 48VDC. Single outputs offered are 3.3, 5, 12, and 15VDC. Dual outputs are +/-12 and +/-15VDC. The KMW Series includes useful...
Read More »
Reduce Time to Market, Improve System Uptime with Dedicated Computing Medical Solutions
Embedded computing solutions from Dedicated Computing are designed to meet unique and specific requirements. As the preferred supplier to leading healthcare OEMs, the Dedicated Computing team of expert engineers gets your product out to the market faster while helping your company avoid costly validation and verification steps. Check out our video to learn more.
Read More »
