Welding Power Source integrates with robotic controllers.
AC to DC Power Supplies

Welding Power Source integrates with robotic controllers.

Power Wave(TM) F355i multi-process, digitally controlled, inverter power source is packaged for use with Fanuc(R) RJ3i and later robotic controllers. Providing 350 amps at 60% duty cycle, unit is capable of GMAW pulse, Synergic GMAW, GMAW (short arc and spray), and FCAW procedures. It can handle high output applications while producing precise welds. F355i is packaged with Power Feed 10R or...

Read More »
DC/DC Converters have 1% output noise of output voltage.
DC to DC Power Supplies (Converters)

DC/DC Converters have 1% output noise of output voltage.

Dual output HW family DC/DC converters consists of 9 models ranging from 5 to 6 watts of output power in 24-pin DIP. Models are self-contained with input and output filtering. HW models offer 2:1 input range; 9 to 18, 18 to 36, or 36 to 75 Vdc. Outputs are +/- 5, 12, or 15 V with currents of +/- 500, 250, and 200 mA, respectively. Converters are isolated input to output with isolation voltage of...

Read More »
Dual Output DC-DC Converters operate from -40 to 85 deg C.
DC to DC Power Supplies (Converters)

Dual Output DC-DC Converters operate from -40 to 85 deg C.

NKA Series 1 W converters are supplied in sub-miniature, 14-pin DIP packages and are available for 3.3, 5, and 12 V input voltages. Output voltage options of 12 and 15 V are offered for 3.3 V input model, while 5V and 12 V input parts can be supplied with voltage options of 5, 9, 12, and 15 V. Galvanic isolation of 3 kVdc reduces switching noise. Internal SMD construction uses multilayer ceramic...

Read More »
Desktop Power Supplies are CE-compliant.
Power Supplies

Desktop Power Supplies are CE-compliant.

Series PW117 6 to 12 W universal switch-mode power supplies are available in 9 models ranging from 3 to 48 V with input voltage of 100 to 240 Vac. Configurations include: IEC320-C14 (with ground) and IEC320-C8 (no ground). Each model complies with EMI/RFI regulations. Units measure 3.35 in. long x 1.81 in. wide x 1.30 in. high. Applications include DSL/cable modems, network hubs, print servers,...

Read More »
Uninterruptible Power Supply can be field upgraded.
Power Supplies

Uninterruptible Power Supply can be field upgraded.

Hot-swappable S5K modular UPS allows users to increase ratings from 4 to 16 kVA, boost run-times, and add N+x parallel redundancy. Applications include data handling systems, network servers, enterprise telecommunications systems, LAN gateways, and RAID arrays. Each modular component, including 4kVA power modules, battery modules, and system control modules, are hot-swappable, so changes can be...

Read More »
Switching Power Supplies range from 5 to 30 watts.
Power Supplies

Switching Power Supplies range from 5 to 30 watts.

Economod PCB mount modular power supplies offer single, dual, or triple outputs and universal input range from 85 to 265 Vac with 47 to 440 Hz. Single outputs are 5, 12, 15, and 24 Vdc. Dual outputs are ±5, ±12, ±15 and +5,+12 Vdc. Triple outputs include 5, ±12 and 5, ±15 Vdc. All models are fully encapsulated and are over voltage and short circuit protected....

Read More »
AC to DC Power Supplies

Power Supplies meet FCC and EN Class B standards.

RKW 1500 Watt series single output, low noise power supplies provide 3.3 to 48 Vdc outputs from 85 to 264 Vac with power factor correction. Conducted and radiated emissions are suppressed to meet FCC Class B, VCCI Class B, EN 55011-B and EN 5022-B limits with external ac filter. Without filter, supplies meet Class A standards. Supplies have remote on-off voltage control and current balance...

Read More »
AC to DC Power Supplies

Welding Inverter communicates internally via DeviceNET(TM).

PC- and PDA/Palm(TM)-compatible Auto Invision(TM) 6500 power supply automatically identifies robots and calibrates appropriately. DC welding output varies from 5 to 1170 A with 100 percent duty cycle rating of 675 A, 44 V. It performs MIG, pulsed MIG, adaptive pulsed MIG, and flux cored welding for robotic and fixed automation systems. Unit offers 1/4-turn, quick connector, Auto-Line(TM)...

Read More »
Stick/TIG Inverter provides simple operation.
AC to DC Power Supplies

Stick/TIG Inverter provides simple operation.

CST(TM) 250, produces 250 amps at 50% duty cycle and weighs just 40 lb. CST Rack with four CST 250 inverters weighs 328 lb. Operator interface includes On/Off switch, amperage control knob, infinitely adjustable from 5 to 250 amps, and process select switch that eliminates setting errors. Receptacle, on front of machine, permits remote amperage control when Stick or TIG welding. Inverter accepts...

Read More »

All Topics