Alternator provides power for stick welding.
AC to DC Power Supplies

Alternator provides power for stick welding.

Power-Plus(R) Exciter(TM) TA-6/200-KBC provides 5.5 kVA of 115/230 Vac auxiliary power, 200 dc amps @ 60% duty-cycle welding output, and 12/24 V battery charger. Separate windings are used for welding and auxiliary power. Generator is powered by 15 hp, 1-cylinder, gas fueled, air-cooled engine. Alternator provides smooth weld output for STICK or scratch-start dc TIG welding applications. It fits...

Read More »
Portable DC Inverter offers constant-current output.
AC to DC Power Supplies

Portable DC Inverter offers constant-current output.

Single-phase, 230/460 Vac, 50/60 Hz P-Wee(R) 250 GTS power source is designed for STICK, high frequency TIG, and Lift Start TIG welding applications. It includes adjustable hot start and automatically adjusts arc control for smooth operation with all electrodes. Standard controls include gas valve, built-in sloper, spot timer, pulser, and high-frequency starting. Fixed preflow is provided and...

Read More »
DC-AC Inverters power multi-tube LCD modules.
DC to AC Power Supplies (Inverters)

DC-AC Inverters power multi-tube LCD modules.

MD Series drives up to 16 CCF tubes with combined power of 10-60 W. High-efficiency inverters can be dimmed using external analog control signal that interfaces with onboard pulse width modulator. Inverters can dim to less than 0.5% duty cycle, for dimming ratio of 200:1. Depending on backlight, dimming ratio of 1000:1 can be achieved. Five mounting holes on each module make installation simple....

Read More »
AC Inverter suits harsh environments.
DC to AC Power Supplies (Inverters)

AC Inverter suits harsh environments.

MV-4X has NEMA 4X/12 and IP66 ratings, allowing it to resist dust and forced water or chemicals. On board RS-485 Modbus RTU allows for networking up to 32 nodes. Users can select between open loop vector control or volts/hertz control with simple parameter change. Programmable analog and digital inputs and outputs are available. Inverter is offered in 230 Vac, 3-phase from 1/2 to 10 hp, and in...

Read More »
DC/DC Converter delivers 60 watts of power.
DC to DC Power Supplies (Converters)

DC/DC Converter delivers 60 watts of power.

Dual-output, quarter-brick Model AEQ15AF48 has 5 V output that delivers up to 12 A, and 3.3 V output that provides up to 15 A. With operating efficiency near 90%, converter delivers 60 W of output power in any combination demanded by two loads. It has input range of 36 to 75 V, output voltage trim adjustment, positive or negative logic-enable, input-control pin, under-voltage lockout, and...

Read More »
Portable Inverter suits TIG welding applications.
AC to DC Power Supplies

Portable Inverter suits TIG welding applications.

Pro-Wave(TM) 300GTSW AC/DC inverter offers full range capability from 300 to 5 amps. It includes Smart Logic(R) input voltage protection, Easy Link flip-of-a-switch voltage selection, and electronic input circuit protector. Inverter produces 200 A output from 50 A of single phase, 230 Vac input. Spot timer ranges from 0.5 to 5.5 sec, and pulse control ranges from 0.5 to 500 pps. Hot start stick,...

Read More »
AC/DC Power Supplies have 0 to 50 deg C operating range.
AC to DC Power Supplies

AC/DC Power Supplies have 0 to 50 deg C operating range.

DMS-PS-CM Series AC/DC instrumentation power supplies accept universal AC inputs (85 to 264 Vac @ 47 to 63 Hz) and deliver 5, 12, and/or 24 Vdc outputs from single, dual, or triple-output configurations. They offer output noise rated to 40 mVp-p on main output and 8 mVp-p on auxiliary outputs. Supplies feature built-in line fuses and on-board LED indicators. Hold-up time with 120 Vac input is 20...

Read More »
Linear Power Supply provides dual outputs.
Power Supplies

Linear Power Supply provides dual outputs.

Model 2.12.360 offers output of +/-12 V at +/-360 mA making it suitable for noise sensitive applications. Voltage accuracy is +/-0.5%, line and load regulation is +/-0.04% max, and output ripple is 1 mV rms. Input options include 110, 115, 220, 230, and 240 Vac. Unit is fully encapsulated with epoxy based potting compound. It features isolation voltage of 1500 Vrms, and is short circuit protected...

Read More »
DC/DC Converters power low voltage silicon from 5V source.
DC to DC Power Supplies (Converters)

DC/DC Converters power low voltage silicon from 5V source.

V7PC-10B Series non-isolated, step-down converters provide up to 10 A of output current from 5 V source. Output voltages range from 3.3 V down to 1.0 V. V7PC-10B25S 2.5 V unit delivers 92% efficiency at full load, while 3.3 V unit, V7PC-10B33S delivers 94%. Converters feature single-in-line package, overvoltage and short-circuit protection, and fixed-frequency operation. They operate to 70 deg C...

Read More »

All Topics