Switchmode Power Supplies fit automation applications.
Power Supplies

Switchmode Power Supplies fit automation applications.

Compact connectPower CP-SNT 55W requires 2 1/4 in. of TS 35 DIN-rail. Models are available in four versions: 24 to 28 Vdc at 2.3 A; 5 Vdc at 3 A; 12 to 15 Vdc at 3.0 A; and 48 Vdc at 1.04 A. All have adjustable outputs, metal housings, inputs of 85 to 265 Vac or 120 to 300 Vdc, overcurrent shutdown with automatic restart, thermal shutdown, and approvals including UL 508 listing, CE, and CSA. The...

Read More »
Power Supplies

Power Supply provides 90% efficiency rating.

Switch mode wipos Series provides 20 A, 24 V with single-phase, 100 to 130 Vac input. Unit features power factor correction according to EN 61000-3-2, temperature-prompted power limitation, adjustable output voltage of 23 to 27 V, and selectable output current balancing during parallel operation. Ramp up time is

Read More »
AC/DC Power Supplies provide output of 5 to 22 watts.
Power Supplies

AC/DC Power Supplies provide output of 5 to 22 watts.

OFM Series ultraminiature, modular, switching power supplies accept universal input from 85 to 265 Vac and 47 to 440 Hz. Single outputs of 5 to 24 Vdc are provided by the 18 models. Units include power-good LED and output adjustment potentiometer, and will operate over ambient temperature of 0 to 48 deg C without forced cooling or output power derating. All models contain over voltage and short...

Read More »
Switching Power Supply offers high efficiency in small package.
AC to DC Power Supplies

Switching Power Supply offers high efficiency in small package.

Rated at 130W, AC/DC Model AAD130 offers 83% efficiency, and measures only 1.25 x 3.0 x 5.0 in. With 4 outputs, power-factor-corrected switching power supply features current sharing between outputs of similar units. AAD130 is capable of correcting input waveform to better than 0.98 power factor at full load between 90 and 264 Vac input. It meets IEC1000-3-2 harmonic distortion specifications and...

Read More »
Power Supply fits CompactPCI(R) systems.
Power Supplies

Power Supply fits CompactPCI(R) systems.

Model cPCI35ODC 6Ux8HP hot-swap supply is in compliance with PICMG(TM) 2.11 R1.0 Power Interface Spec and other CompactPCI standards. Delivering 350 W of continuous output power, unit supports standard PCI output voltages of +5 V, +3.3 V, +12 V, and -12 V with no minimum load requirement. Active current sharing and internal ORing diodes are included to support high availability (HA) applications...

Read More »
Power Supplies

UPS handles power fluctuations in CompactPCI systems.

ICP-UPS is designed for CompactPCI systems with Windows NT 4.0 or greater. It provides required power backup allowing operating system to shut down in controlled manner following power outage to maintain data integrity and ensure that next boot occurs without problems. Onboard control logic continually monitors supply line. Ni-Cd battery energizes application for up to 60 sec in the event of a...

Read More »
DC/AC Inverters meet NEBS/Telco standards.
DC to AC Power Supplies (Inverters)

DC/AC Inverters meet NEBS/Telco standards.

Topaz S4 scalable -48 Vdc DC/AC inverters offer paralleled synchronized operation while N+1 redundancy is achieved with 2 or more units connected in parallel. They use redundant power modules that are hot swappable within rack mountable receiver cabinet. Units are scalable from 3.5 kVa to 21 kVa in N+1 configuration. Noise filter limits ripple current on battery and ensures radiated and conducted...

Read More »
AC Power Sources includes 16 waveform library.
Power Supplies

AC Power Sources includes 16 waveform library.

Available with manual or programmable controller, ASX series switch-mode topology AC Power Sources achieve power conversion using pulse-width modulation. Manual controller enables users to adjust voltage and frequency from instrument's front panel. Controller includes 1 phase/ 3 phase switch selectable output, 1500 to 6000 VA output capacity, and 600 V output that covers frequency band of 15 to...

Read More »
Switching Power Supplies are DIN rail mounted.
Power Supplies

Switching Power Supplies are DIN rail mounted.

DRL Series 25 to 320 W power supplies, in cage-covered packages, have snap-on, DIN-rail mounts. They accept universal inputs from 85 to 265 Vac. Thirty models provide single outputs from 5 to 48 Vdc. All have soft-start circuitry, EMI filtering, integral, power-good LED indicator, and output-adjustment potentiometer. Units operate over ambient temperature range of -10 to +60 deg C, without forced...

Read More »
DC-DC Converter generates regulated output.
DC to DC Power Supplies (Converters)

DC-DC Converter generates regulated output.

Switched-capacitor ZXCP330E6 provides 3.3V output from 2 to 4.4 V input with maximum load current of 40 mA. Short-circuit and thermal-overload protected, SOT23-6 packaged converter suits lithium-ion and alkaline battery-powered products. Operating with flying capacitor of 220nF and 10 microF bypass capacitors at input and output, typical PCB area requirement is 8 x 5.3 mm. It draws 20 microA...

Read More »
Tekna Manufacturing LLC Announces NFPA 99 Compliant Model 7200 Multiplace Chamber
Sponsored

Tekna Manufacturing LLC Announces NFPA 99 Compliant Model 7200 Multiplace Chamber

Tekna is a leader in Monoplace and Multiplace Hyperbaric Chambers for Hyperbaric Oxygen Therapy (HBOT), offering products that set the standard for quality and innovation. Our new 7200 series of multiplace chambers is a state-of-the-art system that integrates advanced engineering with a plethora of features and options making it the industry's premier HBOT system. To learn more, see our video.

Read More »

All Topics

COVID-19 Response Suppliers COVID-19 Response:
Can Your Company Help Provide Critical Supplies?

We are using the power of our platform to aid in the mass shortage of critical supplies. If your company can help provide supplies, capabilities, or materials for products such as N-95 Masks and Tyvek SuitsPlease let us know.

COVID-19 Response Suppliers