DC to AC Inverter suits LCDs backlit by 4 CCF tubes.
DC to AC Power Supplies (Inverters)

DC to AC Inverter suits LCDs backlit by 4 CCF tubes.

DMD Series DC-AC inverter provides wide-range dimming via analog signal for LCDs. It is suitable for use as power solution for LCD modules from 15 to 18 in. (diagonal) used in medical imaging applications, point-of-sales (POS) displays, kiosks, and desktop computer monitors. Inverter provides up to 23 W of output power, integrated input and output connectors, and onboard pulse width modulation...

Read More »
Power Source is available in inverter rack.
Power Supplies

Power Source is available in inverter rack.

Invertec® V350-Pro power source is offered in rack-mounted configuration that complies with National Electric Code (NEC) and is IP23S compliant. Lockable main disconnect switch on primary power supply allows users to turn off power to all machines in rack by turning one local switch. Lincoln rack has watertight, flexible conduit and THWN rated wiring to connect each inverter to distribution...

Read More »
DC Source offers multi-channel programmable operation.
Power Supplies

DC Source offers multi-channel programmable operation.

GX1838 3U PXI DC source provides 8 output channels and 3 programmable 14-bit voltage rails. Each voltage rail can be programmed to output between -9 and +32 V, and can provide current of 100 mA. Rails can also be connected to external input, and Rail C can be connected to on-board programmable electronic load. Each rail may be switched to any of 8 output channels.

Read More »
Power Supply works in harsh environments.
Power Supplies

Power Supply works in harsh environments.

Ruggedized Model 1.10.750 has operating temperature range of -25 to +50°C and is housed in 2.5 x 3.5 x 1.56 in. case which is fully encapsulated with epoxy potting compound. It provides linear output of 10 V @ 750 mA, with voltage accuracy of ±1%, line and load regulation of ±0.1%, and noise and ripple of 1 mV RMS, making it suitable for use as transducer excitation source....

Read More »
DC-DC Converter provides up to 70A in half brick package.
DC to DC Power Supplies (Converters)

DC-DC Converter provides up to 70A in half brick package.

PAH200H series DC-DC converter offers power density of over 105 W/inÂ-³, and provides three output voltage choices from 1.8 to 3.3 V. Efficiencies are rated up to 90% for 3.3V output unit. Unit operates from nominal 48 V input, provides regulated output at power levels up to 198 W, and accepts DC inputs from 36 to 75 Vdc with peak of 100 V for 100 ms. Features include remote sense,...

Read More »
Redundant Power Supply can be hot swapped.
Power Supplies

Redundant Power Supply can be hot swapped.

In case of primary power supply failure, RPSS redundant power supply system for company's Series 90(TM) -30 controllers, switches power to backup unit without process interruption. If one power supply fails, user can replace failed unit by removing power from defective unit and hot swapping it while backup unit is powered and controlling process. Module is compatible with all Series 90-30 power...

Read More »
DC/DC Converters deliver 60 Amps output current.
DC to DC Power Supplies (Converters)

DC/DC Converters deliver 60 Amps output current.

Open frame ALH60 and heat sink adaptable AEH60 are 60 Amp, half-brick converters with efficiencies up to 91% on 3.3 V model and 89% on 1.8 V model. Units include over temperature, over current and over voltage protection, plus under voltage lockout with hysteresis to prevent false starting and stopping at low input voltages. With 36 to 75 V input range and output voltages of 1.2, 1.8, 2.5, and...

Read More »
DC to DC Converter measures 1.45 x 2.3 x 0.43 in.
DC to DC Power Supplies (Converters)

DC to DC Converter measures 1.45 x 2.3 x 0.43 in.

DualQor(TM) series dual output voltage, quarter-brick sized isolated dc/dc converter delivers up to 60 W total output power at ±12 V without attached heatsink. Converter module employs synchronous rectification to achieve efficiencies to 92%. It has 48 V nominal input (35 to 75 V range) and meets input voltage transient requirements up to 100 V for 100 ms. Mean time between failures (MTBF)...

Read More »
High-Density Power Supply can be configured to specification.
Power Supplies

High-Density Power Supply can be configured to specification.

Switch-mode, AC-DC Vega Series is offered in 450 and 650 W models with 10 outputs (max) each and no minimum load requirements. It provides seamless output voltage from 1.8 to 62 V, density of 5.8 W/inÂ-³, and allows input from 85 to 264 Vac. Modular series offers single PCB design, in both front-end converter and output module stages, and provides over-voltage and over-current protection.

Read More »
Adapter offers up to 38 W of power.
Power Supplies

Adapter offers up to 38 W of power.

PSA45U-201 adapter switching power supply provides dual outputs: +5 Vdc for logic control and +12 Vdc for motors, disk drives, tape drives, and external peripherals. It has active overvoltage protection at 6.5 V max. Overcurrent protection offers short circuit auto restart and provides minimum hold-up time of 12 ms at maximum load of 120 Vac. Operating temperature is 0 to 40°C, and -25 to...

Read More »

All Topics

COVID-19 Response Suppliers COVID-19 Response:
Can Your Company Help Provide Critical Supplies?

We are using the power of our platform to aid in the mass shortage of critical supplies. If your company can help provide supplies, capabilities, or materials for products such as N-95 Masks and Tyvek SuitsPlease let us know.

COVID-19 Response Suppliers