DC/DC Converters operate without heatsink.
DC to DC Power Supplies (Converters)

DC/DC Converters operate without heatsink.

Typhoon(TM) open-frame, single-board converters use synchronous rectification, and employ surface-mount components and planar, in-the-board transformer structures to limit height to 0.3 in. Single-output, 1/8 brick model offers 1.8 V output and delivers up to 40 A with 89% efficiency at full load. Dual-output, Â-¼ brick models offer 3.3/1.2 V or 3.3/1.8 V independently regulated output...

Read More »
Uninterruptible Power System is suitable for use in offices.
Power Supplies

Uninterruptible Power System is suitable for use in offices.

With compact design, S1K Off-line Uninterruptible Power System delivers multi-level protection. Separate outlets located on back of unit allow for safeguarding of three critical devices requiring battery back-up, while fourth surge-protected-only outlet is suited for non-critical equipment. System includes 4 NEMA 5-15R outlets, data-line surge protection for phone system or network, and DB9...

Read More »
DC to DC Power Supplies (Converters)

DC/DC Converters offer heat sink option.

Series HS 75 W PowerWatt Converters achieve efficiency up to 93% and power density of 98 W/inÂ-³. Interfacing and potting materials minimize thermal resistance from multilayer PCB to anodized aluminum heat sink. Converters feature 100 µS transient response time, 500 µA off-state current, output synchronous rectification, 2:1 input voltage range, input-to-output isolation,...

Read More »
Span Power DC/DC Converters suit ETSI/HDSL applications.
DC to DC Power Supplies (Converters)

Span Power DC/DC Converters suit ETSI/HDSL applications.

Isolated CPK-0102 converters offer input range of 36-72 Vdc. With dual 118 Vdc independent outputs, products provide precision output current limiting on each output to 60 mA; outputs may be paralleled for current sharing. Open frame construction requires no external cooling or heat sink for operation over ambient temperature range of -25 to +71°C without power derating. All models provide...

Read More »
DC/DC Converters enable smaller portable electronics designs.
DC to DC Power Supplies (Converters)

DC/DC Converters enable smaller portable electronics designs.

FunctionPAK(TM) synchronous dc-to-dc boost converters provide high power density of more than 380 W/in.Â-³ in 0.58 x 0.48 in. footprint. Models FX5545G006 and FX5545G106 convert input voltages from 2.5-6 V to low-ripple output voltages from 3.3-6 V. Output power and max current are 7.5 W and 1.5 A for FX5545G006 and 10 W and 2 A for FX5545G106. Units stabilize rechargeable battery outputs,...

Read More »
Compact Switcher offers standby and auxiliary outputs.
Power Supplies

Compact Switcher offers standby and auxiliary outputs.

With active power factor correction, 125 W LPS125, 85-264 Vac power supply is suited for 1U rack installations and low-profile applications. With 6.7 W/in.Â-³ density, unit delivers full rated output of 130 W with 30 CFM forced air or 80 W with convection cooling. It measures 3 x 5 x 1.29 in. and can be set up for lengthwise or crosswise airflow. Device also includes Class B EMI filter,...

Read More »
DC/DC Converter offers dual isolated outputs.
DC to DC Power Supplies (Converters)

DC/DC Converter offers dual isolated outputs.

Model U30 offers operating ranges from 10-30, 22-68, and 40-120 Vdc. It features synchronous rectification for main output and rectifying diodes for auxiliary output. Users can specify any output voltage range from 2.5-18 V. Converter provides up to 30 W with up to 85% efficiency. It includes input under/overvoltage protection, input-to-output isolation, soft start, hiccup mode, 330 kHz switching...

Read More »
Portable AC/DC Inverter handles TIG welding applications.
DC to AC Power Supplies (Inverters)

Portable AC/DC Inverter handles TIG welding applications.

PRO-WAVE 185TSW generates True-Square wave AC/DC output with full range capability from 185 A down to 5 A. Voltage Reduction Device prevents accidental electric shock by reducing OCV when power supply is not in use. Inverter includes Current Sloper; Current Pulser; variable frequency, wave balance control; digital AMP/volt meter; remote control capabilities; and Lift or HF assisted starting. All...

Read More »
Laser Power Module suits amplifier and pump-laser testing.
Controls and Controllers

Laser Power Module suits amplifier and pump-laser testing.

Suited for use with LDC-3926 16-Channel High Power Controller, 42 W Model LDC-3926339 Laser Diode Current Source Module is for development and production testing of EDFA and Raman amplifiers and high-power pump lasers. Module provides power output of up to 6 A at 7 V, constant current/power control, external modulation, and 4-wire forward voltage measurement. Laser diode protection features such...

Read More »
Precision Fabricating with Over 40 Years of Experience
Sponsored

Precision Fabricating with Over 40 Years of Experience

Quality Sheet Metal specializes in delivering precision, value, and customer service. With a client base that spans many diverse industries and a reputation for excellence that goes back over four decades, our clients know that we can provide the optimal combination of value and flexibility regardless of the challenge. See our video to learn what we can do for you. Through investments in state-of-the-art design, manufacturing, and quality control systems, Quality Sheet Metal remains focused on maintaining a high standard of quality, customer service, and competitive pricing. With an emphasis on customer satisfaction, Quality Sheet Metal is dedicated to establishing long-term partnerships, similar to the ones they currently have with their valued clients. If you're looking for a new partner with extensive capabilities in sheet metal fabricating and finishing, look no further.

Read More »

All Topics