DC/DC Controllers provide output voltages down to 0.8 V.
Electrical Regulators

DC/DC Controllers provide output voltages down to 0.8 V.

Models MIC2198/9, offering current capability of 20 A, can power CPUs, DSPs, and FPGAs with up to 95% efficiency. Input voltage range is 4.5-32 V, making them suitable for 5, 12, and 24 V power bus systems. Model MIC2198 operates at 500 kHz, while Model MIC2199 operates at 300 kHz. Both units are housed in 4 x 4 mm MLFTM 12-lead package, and provide PWM current mode control, cycle-by-cycle...

Read More »
AC/DC Power Supplies offer current sharing capabilities.
AC to DC Power Supplies

AC/DC Power Supplies offer current sharing capabilities.

Equipped with power-good LED indicator and output adjustment potentiometer, PSP300 and PSP500 Series active power factor corrected enclosed switching power supplies provide output power over 300 and 500 W ranges, respectively. All models accept Universal Input from 85-265 Vac, and some models provide single outputs from 5-48 Vdc. Features include soft-start circuitry, integral EMI filtering,...

Read More »
DC/DC Converters provide isolated output.
DC to DC Power Supplies (Converters)

DC/DC Converters provide isolated output.

Series 5E 25/30 W DC/DC converters feature pi-input filter and 2:1 input voltage ranges of 9-18, 18-36, and 36-72 Vdc. Regulated, low ripple, single, dual, and triple outputs are available. CMOS/TTL-compatible, remote on/off control allows output to be put into powered down, stand-by mode. Single-output converters have external Output Trim that allows output voltage to be set within ±10%...

Read More »
Power Supplies suit bus-networking applications.
Power Supplies

Power Supplies suit bus-networking applications.

FieldLink® Power Supplies are available in models designed specifically for AS-interface, Foundation Fieldbus, DeviceNet, Modbus, and Profibus PA and DP. Solid-state circuitry limits current output under overload or short-circuit conditions and restricts power to 100 W. Potential damage to networking components is eliminated. Units are DIN rail mounted and comply with requirements for Class...

Read More »
DC-DC Converters offer current sharing/parallel operation.
DC to DC Power Supplies (Converters)

DC-DC Converters offer current sharing/parallel operation.

Series T1UDC single output, 600 W converters feature output voltages of 3.3, 5, 12, 24, and 48 V. Inputs range from 22-32 Vdc or 42-56 Vdc. Units include remote turn-on/turn-off, ±5% voltage adjust range, and DC-operated ball bearing fan. Operating temperature range is -10 to +65°C. Over-voltage, over-load, and over-temperature protection is provided. Ruggedized units are available...

Read More »
POL Converter delivers up to 80 A at 0.9-1.8 Vdc.
Power Supplies

POL Converter delivers up to 80 A at 0.9-1.8 Vdc.

VÂ-·I Chip Voltage Transformation Module, Model V048K015T80 achieves response time of less than 1 µs and delivers up to 80 A while converting 48 V to 1.5 V. It has 1 MHz bandwidth and can provide bi-directional power flow with load. Depending on output regulation needs of application, unit can be operated open- or closed-loop. It meets demands of DSP, FPGA, ASIC, processor cores, and...

Read More »
DC-AC Inverter powers 2-lamp LCD modules.
DC to AC Power Supplies (Inverters)

DC-AC Inverter powers 2-lamp LCD modules.

Series SE2 fully vacuum-encapsulated, PC-mountable DC-AC inverter is less than 0.420 in. high and 0.75 in. wide x 2.98 in. long. It is resistant to harsh environments, including shock, vibration, and humidity. Unit provides up to 5 W of output power and features external pulse width modulation dimming. It is suitable for virtually any product employing LCD powered by 2 single cold cathode...

Read More »
Switching Power Supplies support signal-interface line.
Power Supplies

Switching Power Supplies support signal-interface line.

Series PS5R offers 6 models to accommodate power requirements from 12.5-240 W with 5, 12, or 24 Vdc output for driving company's signal conditioners and distributed I/O modules. Input voltages are 85-264 Vac and 105-370 Vdc compatible. Terminal design facilitates installation. User inserts wire into opening on side of power supply, and pushes down finger-safe terminal screws while tightening....

Read More »
DC/DC Converter delivers 250 mA/channel without inductors.
DC to DC Power Supplies (Converters)

DC/DC Converter delivers 250 mA/channel without inductors.

Model LTC3252 spread spectrum, step-down DC/DC converter can deliver 250 mA continuous output to 2 separate channels. It operates from 2.7-5.5 V, making it suitable for single cell Li-Ion or multi-cell NiMH/Alkaline applications. Both outputs are resistor programmable from 0.9-1.6 V. Switched capacitor fractional conversion enables it to attain efficiencies as high as 88%. Switching frequency...

Read More »
POL DC/DC Converters deliver 28 Amps.
DC to DC Power Supplies (Converters)

POL DC/DC Converters deliver 28 Amps.

Series LEN non-isolated, point-of-load DC/DC converters accept 12 V ±15% input and convert it to lower voltage from 0.8-3.3 V at 28 A or 5 V at 25 A. Two-phase, fixed-frequency, buck-regulator design enables them to simultaneously deliver 85-96% efficiency, 100 Â-µsec step response, and operating temperature to +70°C without derating. E-brick package is offered in both standard...

Read More »

All Topics