AC Power Supplies support large video systems.
Providing 24 Vac of constant power to support systems of any size, UL listed AC Video System Power Supplies are equipped with up to 16 output circuits and made to overcome voltage drop issues. Output circuits include LEDs that illuminate when power is present and extinguish when short condition is detected, helping to avoid time consuming task of troubleshooting issues with circuits and wiring...
Read More »
Power Supplies are optimized for space and energy efficiency.
Ten new UNO Power supplies provide high-quality, cost-effective power MIDDLETOWN, Pa.- – Phoenix Contact has added 10 new devices to the UNO Power supply family, a range of low-cost but high-quality power supplies. Compared with off-the-shelf products, UNO power supplies offer excellent energy savings, achieved through low idling losses of below 0.3 W and operating at up to 90 percent...
Read More »
PMBus Compliant 1/4 Brick Converter incorporates 32-bit processor.
Incorporating 32-bit ARM7 processor and- 2,250 Vdc input to output isolation, 420 W regulated DBQ0135V2 includes PMBus™-compatible digital interface with Advanced Bus Converter (ABC) pinout for digital power management. This 420 W, 12 Vout quarter-brick converter supports TNV input range of 36–75 V with typ efficiency of 95.2%. Also included, droop load sharing option allows...
Read More »
Pluggable 650 W PSU is optimized for use in cPCI systems.
To meet PICMG 2.11 Power Interface high power requirements on 3.3 and 5 V rails, slimline 6U 8HP 160 mm unit features 2 independent converters operating in parallel. This lets PSU simultaneously provide 80 A at 5 V and 70 A at 3.3 V. While +12 V output is rated at 7 A, -12 V output is rated at 1.5 A. Input voltage is autoranging 90–264 Vac, 47–63 Hz, and efficiency is >80% at full load. This...
Read More »
The Ultimate Guide to Enclosed Tubular Drag Cable and Disc Conveyors
This whitepaper provides a comprehensive overview of enclosed tubular drag cable and disc conveyors.
Read More »
PMBus Compliant 1/4 Brick Converter incorporates 32-bit processor.
Incorporating 32-bit ARM7 processor andÃ- 2,250 VdcÃÂ input to output isolation, 420 W regulated DBQ0135V2 includesÃÂ PMBus™-compatible digital interface with Advanced Bus Converter (ABC) pinout for digital power management. This 420 W, 12 Vout quarter-brick converter supports TNV input range of 36–75 V withÃÂ typ efficiency of 95.2%. Also included, droop load sharing...
Read More »
Pluggable 650 W PSU is optimized for use in cPCI systems.
To meet PICMG 2.11 Power Interface high power requirements on 3.3 and 5 V rails, slimline 6U 8HP 160 mm unit features 2 independent converters operating in parallel. This lets PSU simultaneously provide 80 A at 5 V and 70 A at 3.3 V. While +12 V output is rated at 7 A, -12 V output is rated at 1.5 A. Input voltage is autoranging 90–264 Vac, 47–63 Hz, and efficiency is >80% at full load. This...
Read More »
Medical Power Supply
GTM41133-90VV-x.x-T3, Medical Power Supply, Desktop/External, Regulated Switchmode AC-DC, Input Rating: 100-240V~, 50-60 Hz, IEC 60320/C14 AC Inlet Connector, Class I, Earth Ground, Output Rating: 90 Watts, 12-24V in 0.1V increments, Approvals: C-Tick, CB, CCC, CE, China RoHS, Class I, FCC, GOST-R, IRAM, Korea, Korea (48V Only), Level V, LPS, NEMKO, NrCAN, PSE, RoHS 2, Taiwan BSMI, Ukraine,...
Read More »
Medical Power Supply
GTM41133-90VV-x.x-T3, Medical Power Supply, Desktop/External, Regulated Switchmode AC-DC, Input Rating: 100-240V~, 50-60 Hz, IEC 60320/C14 AC Inlet Connector, Class I, Earth Ground, Output Rating: 90 Watts, 12-24V in 0.1V increments, Approvals: C-Tick, CB, CCC, CE, China RoHS, Class I, FCC, GOST-R, IRAM, Korea, Korea (48V Only), Level V, LPS, NEMKO, NrCAN, PSE, RoHS 2, Taiwan BSMI, Ukraine,...
Read More »
Medical 150 W Power Supplies meet Efficiency Level VI standards.
Approved to EN/ES60601-1 3rd Edition with Means Of Patient Protection (2 x MOPP), 7 x 2.56 x 1.57 in., PEAMD150 Series- meets FCC Class B limits of both radiated and conducted EMI and is compliant to Energy Star Efficiency Level VI standards for average efficiency and standby power. Class I and II AC inlets and single output voltages from 12–48 Vdc are available, and protection circuitry,...
Read More »
Medical 150 W Power Supplies meet Efficiency Level VI standards.
Approved to EN/ES60601-1 3rd Edition with Means Of Patient Protection (2 x MOPP), 7 x 2.56 x 1.57 in., PEAMD150 SeriesÃ- meets FCC Class B limits of both radiated and conducted EMI and is compliant to Energy Star Efficiency Level VI standards for average efficiency and standby power. Class I and II AC inlets and single output voltages from 12–48 Vdc are available, and protection circuitry,...
Read More »
What Can Test Devices Spin for You?
Test Devices helps you ensure the safety and efficiency of your high performance machines with cutting edge spin testing, rotor engineering, and precision balancing capabilities. Check out the video to learn more.
Read More »
