DC to DC Power Supplies (Converters)

Programmable DC/DC Power Management IC simplifies system designs.

Used for powering multi-rail digital chipsets, SMB109 offers multiple DC/DC outputs with digital power management/monitoring and non-volatile system configuration. IC integrates 8 outputs, 3 current-mode buck controllers, one LDO controller, and 4 load switch controllers with digital IÂ-²C interface in 7 x 7 mm QFN-56 package. Able to be configured during development and re-programmed...

Read More »
DC to DC Power Supplies (Converters)

Siemens Aerospace Uses Analog Devices iCoupler Digital Isolation Technology for Sophisticated Satellite Power Protection System

Siemens Aerospace Uses Analog Devices iCoupler Digital Isolation Technology For Sophisticated Satellite Power Protection System ADI's digital isolators proved essential in achieving a high density PCB with over 100 individually isolated power supply domains. NORWOOD, Mass. - Analog Devices, Inc. (ADI), a global leader in high-performance semiconductors for signal processing applications, is...

Read More »
Non-Isolated DC/DC Converters offer output currents up to 120 A.
DC to DC Power Supplies (Converters)

Non-Isolated DC/DC Converters offer output currents up to 120 A.

Featuring efficiencies up to 95%, VRPx Series single inline package footprint POL converters are available as 30, 90, 100, 110, and 120 A modules. Vertical and horizontal mount units can deliver from 3-120 A of output current and operate over input range of 4.5-13.8 V, with output voltage trim range of 0.5-5.1 Vdc. Converters switch at fixed frequency of 400 or 500 KHz and include differential...

Read More »
Electrical Power Generators

Green Power from the North Sea: Siemens to Install Grid Link for DanTysk Offshore Wind

Following the grid connections for the offshore wind farm clusters BorWin2 and HelWin1, Siemens Energy will also install a turnkey grid connection in the North Sea for the SylWin cluster. Purchaser is the Dutch-German transmission grid operator TenneT. In a consortium with the Italian cable manufacturer Prysmian Powerlink, Siemens will connect DanTysk, located west of the island of Sylt as the...

Read More »
AC-DC Power Supplies target medical and industrial applications.
AC to DC Power Supplies

AC-DC Power Supplies target medical and industrial applications.

With less than 1 U profile, Series CSS500 features universal 90-264 Vac, 47-63 Hz input and delivers single output voltages of 12, 24, 30, 36, 48, 54, or 57 Vdc with operating efficiency up to 92%. Power factor corrected units offer low leakage current of less than 300 Â-µA at 264 Vac, 63 Hz and withstand 4 kVac, input-to-output. With convection cooling, supplies provide up to 360 W of...

Read More »
AC-DC LED Driver Power Supplies offer 0-10 V dimming control.
AC to DC Power Supplies

AC-DC LED Driver Power Supplies offer 0-10 V dimming control.

Featuring 3.35 x 2.13 x 1.28 in. form factor, 16.8 W Series LD015D is fully potted and suitable for dry and damp locations. Units offer input voltage of 110 or 230 Vac, DC output from 8-48 Vdc, and wide selection of pre-adjusted constant current outputs. Operating from -20 to +60°C, RoHS-compliant power supplies are phase dimmable, compatible with standard triac and electronic low voltage...

Read More »
AC-DC Power Supply delivers 6 W.
AC to DC Power Supplies

AC-DC Power Supply delivers 6 W.

Suited for consumer, industrial, and ITE applications, Model VOF-6 provides continuous output power, universal input of 85-264 Vdc, and output voltages of 3.3, 5, 12, 15, and 24 Vdc. Unit includes protections for both over voltage and over current conditions. Measuring 2.2 x 1.4 x 0.65 in., open frame power supply offers leakage currents below 0.3 mA.

Read More »
AC/DC Switching Power Supply delivers 15 W output power.
AC to DC Power Supplies

AC/DC Switching Power Supply delivers 15 W output power.

Suited for ruggedized backplane applications, chassis-mountable PC15 Series comes encapsulated with thermally conductive potting compound in plastic resin and fiberglass case that meets UL94V-0. UL-approved and RoHS-compliant series, operating from 85-265 Vac at 47-440 Hz, includes single-output models available with outputs from 5-48 Vdc as well as dual- and triple-output models. Protective...

Read More »
Open-Frame, 150 W AC-DC Power Supply measures 2 x 4 x 1.26 in.
AC to DC Power Supplies

Open-Frame, 150 W AC-DC Power Supply measures 2 x 4 x 1.26 in.

Model ECP150, featuring power density of 14.88 W/cu in., complies with UL/EN/IEC60950-1 and UL/EN/IEC60601-1 safety standards for medical and IT equipment. It has no load input power of less than 0.5 W and typical efficiency of 91%, while operating from universal input of 90-264 Vac, in temperatures from -20 to +70°C. Overvoltage, overload, and short-circuit protection are included. Five...

Read More »
Sponsored

Simple Connection MGB with EtherNet/IP

The new MGB with EtherNet/IP is a leap forward in access door safety. Designed for easy installation, flawless performance, and long service life, it is engineered with robust features and cutting-edge technology that places it firmly at the leading edge of the door safety device industry. To learn all about the benefits of the Euchner MGB, see our video.

Read More »

All Topics

COVID-19 Response Suppliers COVID-19 Response:
Can Your Company Help Provide Critical Supplies?

We are using the power of our platform to aid in the mass shortage of critical supplies. If your company can help provide supplies, capabilities, or materials for products such as N-95 Masks and Tyvek SuitsPlease let us know.

COVID-19 Response Suppliers