DC/DC Controllers achieve efficiencies up to 96%.
Suited for boost, flyback, SEPIC, and inverting power supply applications, Models LT3757 and LT3758 can generate positive or negative regulated output voltage by incorporating 2 internal voltage feedback error amplifiers and reference voltages. Model LT3757 operates with input voltage of 2.9-40 V while Model LT3758 operates over 5.5-100 V input range. H and MP-grade versions are guaranteed to...
Read More »Step-Down Controller is designed for notebook power supplies.
Integrating low-power LDO and RTC regulator in 5 x 5 mm TQFN package, MAX17101 dual, Quick-PWM(TM) step-down controller generates 5/3.3 V supplies in battery-powered systems. It includes internal 100 mA linear regulator, along with one low-current 5 mA always-enabled linear regulator that powers real-time clock when other notebook regulators are disabled. Suited for notebook computers, tablet...
Read More »Step-Down Controller operates over wide 4.5-28 V input range.
Suited for use in 5 or 12 V-bus applications, MAX15023 dual-output, synchronous step-down controller is capable of driving external MOSFETs to deliver at least 12 A per output. It provides accurate output voltage from 0.6 V to 85% of input voltage, and features adjustable switching frequency, external compensation network, and current limit. Offered in 4 x 4 mm, 24-pin TQFN package, device uses...
Read More »Step-Down Controller suits multiple design platforms.
Capable of driving external MOSFETs to deliver two 25 A outputs or single 50 A output, MAX15034 dual-output, synchronous step-down controller is optimized for designs requiring high output current such as computing, telecom, networking, storage, and server equipment. It operates from 4.5-28 V input range, allowing it to be used in 5 and 12 V-bus applications. Programmable features include output...
Read More »Third Party Logistics and Fulfillment
This whitepaper provides an overview of third party logistics (3PL) and fulfillment services.
Read More »Quad-Output Controller suits automotive applications.
Integrating 4 independent voltage outputs in small, 36 mmÃ-² TQFN package, MAX17019 high-input-voltage controller is capable of operating up to 38 V. It includes main-stage step-down controller, 3AP-P step-down regulator, 5AP-P step-down regulator, and one 2 A source/sink linear regulator. Suited for automotive battery-powered devices, unit is fully specified over -40 to +125Ã-
Read More »Power Controllers support PCI Express Specification v2.0.
Providing support for 12 V, 3.3 V, and 3.3 VAUX supplies, MIC2341 and MIC2342 Dual Channel Hot-Plug Power Controllers are equipped with programmable gate voltage slew-rate control, voltage supervision, programmable current limit, and circuit breaker functions. ICs support 2 independent PCI Express slots and offer integrated power MOSFETS for 3.3 VAUX rails with low backfeed on MAIN +12 V and +3.3...
Read More »Power Supply Controller is for TFT-LCD TVs and monitors.
Optimized for LCD-panel applications that use 12 V supply, Model MAX17014 multiple-output power-supply controller operates from 8-16.5 V input voltage range. It integrates step-down and step-up regulators, positive/negative charge pumps, 2 operational amplifiers, and Dual Mode(TM), logic-controlled, high-voltage switch-control block. Available in 7 x 7 x 0.8 mm, 48-pin TQFN package, device is...
Read More »Power Controllers deliver operational flexibility.
EPower Controllers have common driver module, used across offered range, that supports up to 4 power modules and makes it possible to support 7 different load configurations. Power modules come in 100/160/250/400 A sizes, and options allow additional modules to be plugged into dedicated slots for extra I/O or digital communications. Also included, PC-based iTools software delivers flexibility for...
Read More »Boost Controllers support LED lighting and dc/dc conversion.
Used for powering large LED arrays, SP7606 can also be used for dc/dc conversion in boost, flyback, Cuk, and SEPIC configurations. Internally compensated 1.2 MHz boost controller is suitable for driving any number of topologies using low side switch. Output feedback disconnect eliminates leakage path from input source during shutdown so that shutdown current is less than 80 Ã-µA. Contained in...
Read More »DC/DC Controller draws 30 -µA in automotive systems.
Producing output voltage from 0.8-10 V, synchronous step-down Model LTC3826/-1 draws 30 Ã-µA when one output is active and 50 Ã-µA when both outputs are active. Each output can deliver up to 20 A of current at efficiencies as high as 95%. Input supply range of 4-36 V is wide enough to protect against high input voltage transients and to continue operation during automotive cold crank....
Read More »Standex Engraving Mold-Tech Offers Nickel Shell Capabilities on a Global Scale
Standex Engraving Mold-Tech is the premier, global supplier for mold texturing and surface finishing. With a full range of services, Standex Engraving Mold-Tech is also the only nickel shell supplier producing in three global locations. See our video to learn more.
Read More »