Position Sensors / Detectors / Transducers

Precision Linear Servo Accelerometers are sealed to IP65.
Position Sensors / Detectors / Transducers

Precision Linear Servo Accelerometers are sealed to IP65.

Designed for use within low acceleration analysis, structural health monitoring, flight test, and civil engineering applications, 4-20 mA A323 L-series sensors have measurement range of ±0.1 to ±2.0 g, with frequency response down to DC. Gravity referenced, closed loop sensors monitor acceleration down to 20 Â-µg and withstand up to 1,500 g of mechanical shock. Housed in IP65...

Read More »
Linear Position Sensors offer stroke lengths up to 300 mm.
Position Sensors / Detectors / Transducers

Linear Position Sensors offer stroke lengths up to 300 mm.

Featuring 18 mm diameter housing that is sealed to IP67, TX2 Series offers linearity to 0.05% with resolution better than 0.01 mm. Pivot heads provide large angle of free movement up to ±12.5°. Available from stock with 8 stroke lengths from 25-300 mm, sensors operate for more than 50 million movements and withstand adverse environmental conditions such as humidity and dust.

Read More »
Magnetic Angle Position Sensor features SAE SENT J2716 interface.
Position Sensors / Detectors / Transducers

Magnetic Angle Position Sensor features SAE SENT J2716 interface.

Designed for accurate angular measurement over full 360°, system-on-chip model AS5165 features SENT J2716 interface for simple transmission of high-resolution sensor information. It provides protection for power supply and output pins against overvoltage up to 27 V. Power supply pins are also protected against reverse polarity to -18 V. AEC-Q100 grade 0 qualified, device features analog...

Read More »
Inclinometer System suits construction and shipbuilding.
Position Sensors / Detectors / Transducers

Inclinometer System suits construction and shipbuilding.

Designed for differential tilt measuring, Model DI-10-DFD-IR allows matching slope of 2 remotely located surfaces. Readout can be set to indicate absolute tilt of either sensor or differential angle between them. Display provides 4Â-½ digit, 7 segment, 0.4 in. high readout indicating +10.000° full scale. Measuring 3.64 x 2.10 x 1.69 in., sensors supplied with system feature aluminum...

Read More »
5 Questions to Ask When Choosing a Custom Glass Manufacturer
Sponsored

5 Questions to Ask When Choosing a Custom Glass Manufacturer

Due to the inherent complexity of glass fabrication, many professionals seeking glass services know exactly what kind of part is needed, but are unclear on the intricacies of the actual manufacturing process. PEG's exclusive guide is designed to help professionals navigate the custom glass manufacturing process with valuable information.

Read More »
Electrolytic Tilt Sensor offers sub arc-sec measurement.
Position Sensors / Detectors / Transducers

Electrolytic Tilt Sensor offers sub arc-sec measurement.

High Accuracy Electrolytic Tilt Sensor (Part #0737-1203-99) utilizes thin film technology to provide inclination measurement with arc-sec repeatability. Sensor offers angle range of ±30 arc-min, less than 0.05 arc-sec resolution and less than 0.5 arc-sec repeatability at null. Featuring hermetic seal design for operation in extreme conditions. applications include geophysical monitoring,...

Read More »
Cylinder Proximity Sensor withstands harsh applications.
Position Sensors / Detectors / Transducers

Cylinder Proximity Sensor withstands harsh applications.

Featuring all-encapsulated body covered by metal housing, Series 8E IP67-rated linear actuator magnetic sensor is resistant to shock and vibration and operates over -10 to +70°C range. Switch is available in reed or electronic versions, and electrical connection is made via 9 ft PVC or 8 mm quick connect male pigtail. Mounting styles are available for tie rod or round type linear actuators,...

Read More »
Cylinder Proximity Sensors come in reed or electronic versions.
Position Sensors / Detectors / Transducers

Cylinder Proximity Sensors come in reed or electronic versions.

Able to sense position of pneumatic cylinders with magnetic pistons, Series 8D features all encapsulated design with metal over housing that protects internal components from harsh environments. Units have 9 ft PVC or 8 mm quick connect male pigtail and come in broad range of clamping styles for sensing round or tie rod type linear actuators. Operating from -10 to +70°C, sensors meet NEMA...

Read More »
Single Axis Servo Inclinometer has compact and rugged design.
Position Sensors / Detectors / Transducers

Single Axis Servo Inclinometer has compact and rugged design.

Available in ranges from ±3° to ±90°, fully customizable T435 'L' series offers 4-20 mA loop powered signal, proportional to sine of available angle of tilt, with resolution down to 0.2 arc-sec and 1,500 g mechanical shock survivability. Unit is self-contained and can connect to DC power source and readout or control device. Measuring only 2.41 in. high and less than 1.46...

Read More »
Position Sensors / Detectors / Transducers

Rotary Position Sensor targets safety critical systems.

Utilizing non-contact, programmable Hall-effect technology, Model SRH220DR provides rotary measurement in extreme industrial and off-highway environments. Sensor features dual redundant outputs and is factory programmable to 0.1-4.9 Vdc output range. Operating from 5 Vdc regulated or 9-30 Vdc unregulated power supply, unit has over-voltage protection to 40 Vdc. Each output channel can be...

Read More »
Smart Indicator features 2 LVDT channels.
Position Sensors / Detectors / Transducers

Smart Indicator features 2 LVDT channels.

Designed for measurement and control of dual-channel LVDT measurement fixtures, Model 4215-LVDT combines 2 LVDT channels, print capabilities, and RS232/485 serial communication. Unit is also capable of mixed transducer interfacing, including LVDT, DC Strain Extensometer, and Quadrature encoder-based position measurement devices. Electrically compatible with TEDS, Model 4215-LVDT interfaces with...

Read More »

All Topics