Position Sensors / Detectors / Transducers

LVDT Linear Position Sensors Available in Different Housings
Position Sensors / Detectors / Transducers

LVDT Linear Position Sensors Available in Different Housings

Pennsauken, NJ - Macro Sensors (www.macrosensors.com) offers its AC-operated LVDTs in different material housings to perform in varying operating environments including those with high and low temperature extremes, radiation exposure, seawater and vacuum pressure conditions. Standard configurations of Macro Sensors' AC-operated linear position sensors are constructed of stainless steel with...

Read More »
Position Sensors / Detectors / Transducers

Multi-Ionization Gauge Transducer supports different ranges.

By incorporating signal from Pirani gauge SPU and Atmospheric sensor SAU, G-TRAN Series Multi ionization Gauge SH2 can connect 3 types of vacuum gauges with different measurement ranges. This separation type wide range vacuum gauge, in addition to being able to select gauge head to meet desired vacuum range by end-user, also enables field replacement of only failed gauge heads and measurement of...

Read More »
Macro Sensors LVDTs Now Certified for Use on General Electric Gas Turbines
Position Sensors / Detectors / Transducers

Macro Sensors LVDTs Now Certified for Use on General Electric Gas Turbines

Pennsauken, NJ... US-based sensor manufacturer Macro Sensors (www.macrosensors.com) is now an approved LVDT supplier for General Electric (GE) gas turbines. The LVDTs are implemented for position measurement on governor valves, throttle valves, reheat/stop valves, interceptor valves, and many other control valves. While Macro Sensors has been certified for use on GE steam turbines for years, the...

Read More »
Magnetic Tape Encoders mount directly, repeatedly to shafts.
Position Sensors / Detectors / Transducers

Magnetic Tape Encoders mount directly, repeatedly to shafts.

Used for speed and position monitoring, HDMag series is comprised of bearing-less and contact-free encoders that attach to drive or generator shaft via customized, flexible magnetic tape. Products can be installed and removed repeatedly without affecting performance, and read-head incorporates dual sensor head mounted to frame over flexible tape. This operates without interruption over fastening...

Read More »
Position Sensors / Detectors / Transducers

Rotary Position Sensors support application-specific tailoring.

Comprised of 0.866 in. dia touchless rotary sensors, programmable Vert-X 22E Series uses magnetic pick up secured to rotating object. Lack of any direct mechanical linkage between shaft and measuring system eliminates wear. Offered in 5 and 24 V supply versions, sensors have 0° to 360° measurement range, up to 2 switch outputs, and 14-bit max resolution. Repeatability and hysteresis...

Read More »
Tape Extension Position Sensor suits pulley applications.
Position Sensors / Detectors / Transducers

Tape Extension Position Sensor suits pulley applications.

Constructed with stainless steel tape coiled on precision drum, POSITAPE® WB12 Series provides measuring range of 118 in. with linearity of ±0.05% full scale. Sensor is based on non-contact magnetic encoder, which serves as angle sensor element for tape drum. Series is available with 0.5-10, 0.5-4.5, and 4-20 mA analog outputs as well as SSI, CANopen, and CAN SAE J1939 digital...

Read More »
Position Sensors / Detectors / Transducers

Sensor Network from IDENTEC SOLUTIONS Delivers High-Speed Noise Monitoring System at the Nurburgring Motorsport Complex

LUSTENAU, Austria, - Traditional German racing circuit uses IDENTEC SOLUTIONS' SensorSMART Platform to monitor the noise level of race cars. IDENTEC SOLUTIONS, the global-leader in wireless sensor systems in collaboration with Berlin GmbH Engineers Bureau BeSB, have deployed a noise measuring and identification system for use on high-speed race tracks. Leveraged off of IDENTEC SOLUTIONS'...

Read More »
Shaft Angle Rotary Sensor offers alternative to encoders.
Position Sensors / Detectors / Transducers

Shaft Angle Rotary Sensor offers alternative to encoders.

Combining through-shaft design with 360° absolute position feedback, PST-360 Through-Hole Position Sensor incorporates ring magnet with fully sealed Hall ASIC as sensor element. Design is truly non-contacting and does not rely on gears or other interfacing parts. Measuring 9.8 mm thick with body diameter of 37 mm and 50.0 mm mounting hole spacing, standard model features rotor with 14.05 mm ID...

Read More »
Cylindrical Capacitive Gap Sensor offers resolutions to 90 nm.
Position Sensors / Detectors / Transducers

Cylindrical Capacitive Gap Sensor offers resolutions to 90 nm.

Used to measure gap width, capaNCDT CSG uses sensor electrodes and differential method to determine gap widths from 0.9-4.9 mm while moving sensor into gap. Sensor electrodes are applied to top front and back on 20 cm wide circuit board, and flexible probe enables sensor to be used in applications where measurement object is difficult to access. Also available, capaNCDT CSE offers 2.5X larger...

Read More »
Compact Laser Displacement Sensor delivers 1 nm resolution.
Position Sensors / Detectors / Transducers

Compact Laser Displacement Sensor delivers 1 nm resolution.

Suited for semiconductor HDD and web processing industries, SI-F1000 Series Micro-Head Spectral-Interference Laser Displacement Sensor provides precision performance from 2 mm dia sensor head. It delivers laboratory accuracy measurements inside production process as well as assembled products. Optical system uses fiber optic detecting, enabling precision measurements to be taken without...

Read More »

All Topics

COVID-19 Response Suppliers COVID-19 Response:
Can Your Company Help Provide Critical Supplies?

We are using the power of our platform to aid in the mass shortage of critical supplies. If your company can help provide supplies, capabilities, or materials for products such as N-95 Masks and Tyvek SuitsPlease let us know.

COVID-19 Response Suppliers