Torque Transducer mounts in-line to SAE or Metric flanges.
Non-contact, rotary Model RTC sensor transmits torque signal to RF receiver, delivering output of 0 to 10 V, proportional to torque, or optional 4 to 20 mA output. Operating range is 1,500 to 170,000 in.-lb, with running speeds up to 15,000 rpm, depending on range. RF telemetry package is induction-powered by stationary loop antenna coupled to power supply and receiver. Transmitter may be...
Read More »
Current Transducer offers closed loop control.
DCSA Series loop powered, linear output current transformer provides output directly proportional to RMS AC current passing through external LCSC10T12 toroidal sensor. It provides either analog current or voltage: 4 to 20 mA, 1 to 5 Vdc, or 2 to 10 Vdc. Each unit is factory calibrated for monitoring (with LCSC10T12) 0 to 5, 0 to 10, 0 to 20, or 0 to 50 A. Transducer senses current draw on...
Read More »Thin Position Sensor measures all the angles.
NCAPS(R) non-contacting angular position sensor is less than 0.21 in. thick without housing and provides true 360 deg absolute rotary position feedback. It offers extremely thin solution for motion control, rotary position, or steering angle sensing. Sensor has multiple outputs with up to four functional output channels. Each sensor can be factory programmed to give pulse width modulation (PWM),...
Read More »
Displacement Transducers incorporate electronics.
WA-Electronic series of inductive displacement transducers provide 0 to 10 Vdc output signal via in-line electronics. Models include plunger and spring-loaded probe configurations. All have stainless steel construction and handle temperatures up to 300 deg F, making them able to handle harsh industrial environments and wash-down situations. Eight standard measuring lengths are available, from...
Read More »
The ROI of a Full Service Manufacturer
Full service manufacturers incorporate a complete line of production capabilities to facilitate fast, cost-efficient manufacturing of complex products without the need for multiple contractors.
Read More »
Linear Position Sensor has linearity of 0.25%.
DC-operated HydraStar(R) variable inductance, non-contact linear position sensor is designed for use in hydraulic and pneumatic cylinders and actuators. Capable of working in pressures of 3,500 psi, DC HydraStar consists of body with threaded fitting and 0-ring seal. It requires 10 to 36 Vdc power, and produces either 0 to 10 Vdc or 4 to 20 mA output for full displacement. Measurement ranges from...
Read More »
Linear Transducer provides non-contact position sensing.
Sealed to IP67 requirements, MicropulseÃ-® AT (Advanced Tube) magnetostrictive linear transducer uses non-contact magnet that is connected to positioned component for accurate and stable positioning to less than 10 micometers resolution. Analog 0-10 Vdc and electrical-noise-immune start/stop pulse outputs are available, as well as optional dual-analog signals for inline...
Read More »Transducers provide accurate component positioning.
External-mount transducers offer positioning linearity to 0.5%, repeatability of 0.0001 in., and travels of 0.5 to 78 in. Designed to last over 10 million full-travel cycles or 200 million dither cycles, units are unaffected by electrical noise and magnetic interference, and are sealed to IP66 and 50 G shock resistance. They are powered by 10 Vdc and have 5-pin metal connector. Transducers have...
Read More »
Valve Position Sensors suit chemical handling and processing.
DSU35 sensors fit valve stem heights of 20, 30 and 50 mm with outer mounting hole dimensions of 80 and 130 mm. DC, AC/DC and NAMUR sensors have several output options. AS-i version is compatible with Actuator Sensor Interface protocol, and provides direct valve control, eliminating need for separate source. Terminal chamber version is designed for chemical process applications where conduit must...
Read More »
Position Transducer measures up to 4 in. of travel.
Model 174-0321T subminiature position transducer uses stainless steel cable wound around stainless steel drum. Bearing-mounted drum is mated to potentiometric element that translates linear position information to electrical signal. Transducer monitors cable acceleration in excess of 50 g's, and features 5K ohm co-molded conductive plastic potentiometric elements. It has operating temperature of...
Read More »
Analog Laser Sensor has 2 m range.
Powered by 18-30 Vdc, Model BOD-66M analog laser sensor allows continuous measurement of parameters such as distance, height, and length. Analog and digital outputs provide flexibility for industrial automation, and teachable setpoint provides discrete digital PNP output when target reaches set distance. Sensing range is from 200 mm to 2 m with resolutions of
Read More »
Triad WAU Wall Plug-In AC Power Supply May Be First To Meet Level VI Energy Efficiency Standard
Triad Magnetics, an industry leader and one of the most trusted names in transformer design and manufacturing, is proud to announce the release of the Triad WAU Wall Plug-In AC Power Supply. Engineered to provide robust performance and high reliability, it is setting the standard for 120V/60Hz power supplies. See our video to learn all about it.
Read More »
