New: Buy Now on Thomas and Pay Over Time with Credit Key   Learn More

Tool Kit supplies handy array of live-circuit tools.

Tool Kit supplies handy array of live-circuit tools.

MRO Super Kit Plus contains dielectric safety tools for work on energized circuits up to 1,000 Vac and 1,500 Vdc. All tools are double-insulated and manufactured to ASTM F-1505.94 standard. When outer orange insulation layer has worn, inner yellow layer shows through, serving as early warning to remove tool from service. Kit includes screwdrivers, pliers, nutdrivers, sockets, box end wrenches,...

Read More »
Cutter is designed for wire and tubing.

Cutter is designed for wire and tubing.

WC300 cuts wire from 10-30 AWG and tubing from .010 to 5/16 in. dia. It accurately processes up to 12,000 1 in. pieces per hour or 6,900 10 in. pieces per hour. Unit includes 10 programmable batches and 3 variable feed rates. It automatically dereels, feeds and cuts material to programmed length and number of pieces.

Read More »
Mortar Saw cuts joints dust free.

Mortar Saw cuts joints dust free.

Sawtec(TM) Tuc-Pointer cuts out mortar or grout joints. It has maximum cutting depth of 1-1/4 in. and, when used with dust collection system, is virtually dust free. Unit cuts dry, and may be used in horizontal or vertical applications. It has heavy-duty grinder with electronic speed stabilizer, overload warning, and automatic shut-off protection. Adjustable depth shoe is available to enhance...

Read More »
FRL Units are constructed of stainless steel.

FRL Units are constructed of stainless steel.

Prep-Air-® II units include filters, coalescing filters, regulators, piggybacks and lubricators. They are available in 2 basic body sizes: 3/8 in. body with 1/2 in. ports and miniature 1/8 in. body with 1/4 in. ports, with either NPT or BSPP threads. Individual units can be piped together using stainless steel pipe nipples. All units meet NACE specifications.

Read More »
Cleanout Saws help repair cracked floors.

Cleanout Saws help repair cracked floors.

Crack chasing and joint cleanout saws rout out random cracks and joints prior to use of repair compound. All concrete cuts can be made with either hand held or walk-behind saws. Crac-Vac routs out random cracks to depth of 1-1/4 in., and can be used for straight-line joint cleanout work. Cutting to 1-1/2 in., walk-behind CC-100 crack chaser cuts up to 8 ft of crack/min. Cut-Vac cuts to 2-1/2 in....

Read More »
Joint Cleanout Saws have dust free operation.

Joint Cleanout Saws have dust free operation.

JS-90 and JS-110 walk-behind cutting saws have upcut rotation, which enables dust extraction and allows quick connection to dust collection system. Using dry diamond blades, both saws cut to maximum depth of 3 in. and clean joints at rate of 20 to 60 ft/min. Saws allow for simultaneous use of 2 blades for spalled joint repairs. JS-90 has 9-hp Honda gas engine, and weighs 160 lbs; JS-110 weighs...

Read More »
Band Saw Blade eliminates tooth strippage.

Band Saw Blade eliminates tooth strippage.

Lenox Rx-®+ bi-metal blade, with rigid isophonic tooth design, minimizes harmonics during cutting to reduce noise levels. It improves cutting performance on structural steel, I-beam, angle iron, channel iron, tubing, pipe, wide flange beams and nested bundles. Blade is also available in extra heavy set to avoid blade pinching.

Read More »

Charge Erasure Tool eliminates electrical charge build-up.

RapidErase(TM) UV-based system, based on company's 200 and 300 mm photostabilization platforms, gives chipmakers high-throughput process for bringing voltage levels back in line, both in front- and back-end-of-line environments as well as in post-manufacture probe and test area. It incorporates microwave-driven UV source and precisely controlled thermal energies that result in high-throughput,...

Read More »
Impact Socket Sets offer access and versatility.

Impact Socket Sets offer access and versatility.

3/8 in. Drive Semi-Deep Impact Socket Sets come in both metric and fractional sizes. Semi-deep sockets incorporate deeper broach depth than standard length sockets, and utilize fully tapered, nose down design. Both sets come packaged on metal rails. Ten piece fractional set (#4060) includes sizes from 5/16 to 7/8 in., and 12 piece metric set (#4080) includes sizes from 8 to 19 mm. All impact...

Read More »
Machine combines shearing, press-braking, and rolling.

Machine combines shearing, press-braking, and rolling.

TRI-FAB Model 52P features shearing and rolling capacity of 52 in. x 12 ga mild steel and press braking capacities of 12 ga at 36 in. and 14 ga at 52 in. Machine will cut stainless steel up to 0.072 in. Rotating shafts are journalled in bronze bearings, and shear blades are Grade T10 tool steel. Manually-operated back gauge is standard, and can be positioned for use with shear or press brake as...

Read More »
Dodge® Raptor Coupling Now Available in Three Larger Sizes
Sponsored

Dodge® Raptor Coupling Now Available in Three Larger Sizes

The Dodge Raptor coupling epitomizes the innovation and value that has made Baldor a world leader in industrial electric motors. For almost 100 years Baldor has been the go-to source for industries across the globe. The Raptor coupling is just one example of our dedication to engineered excellence and commitment to providing value and performance. See our video to learn more.

Read More »

All Topics