Chain Saws operate safely.
Chain Saws

Chain Saws operate safely.

CS46 and CS52 Pro-Series(TM) have 45.01 cc and 51.7 cc engines with 3 and 3.4 hp, respectively. Each is available with 16 inch and 18 inch bars as option. Both saws come standard with compression valves for easy starting. For operator safety, each chain saw is equipped with an inertia chain brake, guidebar safety tip, and low kickback chain. Applications include limbing, pruning, felling small...

Read More »
Cutters and Inserts provide less than 0.0004 in. axial runout.
Other Milling Cutters

Cutters and Inserts provide less than 0.0004 in. axial runout.

Fix-Perfect finishing cutters and inserts are for cast iron milling. Radial negative, axial positive rake angle makes chipload of 0.020 in./tooth possible. Inserts have 4 cutting edges and are offered in 2 grades. K110M is uncoated K10 class grade designed for machining speeds of 500 to 1000 sfm. KC520M is K15 class TiAIN coated grade designed for machining speeds from 600 to 1250 sfm. Cutters...

Read More »
Cordless Drills work in tight places.
Hand Held Drills

Cordless Drills work in tight places.

Compact drill/drivers include DW927K-2, DW928K-2, and DW929K-2. DW927K-2 12V model produces 0 to 1,400 rpm and 300 in.-lb of max torque. It weighs 3.9 lb with battery. DW928K-2 14.4V model produces 0 to 1,400 rpm and 350 in.-lb of torque. It weighs 4.2 lb. with battery. DW929K-2 18V model produces 0 to 1,500 rpm and 400 in.-lb torque. It weighs 4.5 lb. with battery. All come with kit box, 2...

Read More »
Tote Bags come in camouflage colors.
Tool Boxes, Chests and Cabinets

Tote Bags come in camouflage colors.

Camouflage Totes are constructed of rugged, tear-resistant nylon polyester imprinted with leafy camouflage pattern. Totes have zipper closures to prevent tool loss, reinforced bottoms for durability, and removable shoulder straps. Nylon-stitched and rivet reinforced for durability, totes are available in all popular sizes and shapes. BucketBag(TM) Tool Carrier, which fit over rim of standard...

Read More »
Machine-Tool Drills have multiple phasing ability.
Drill Bits

Machine-Tool Drills have multiple phasing ability.

Machine-tool models include Holeshot(TM) Indexable Drills, Stinger(TM) Small Diameter Drills and Coremaster(TM) Core Drills. Holeshot(TM) large drills, with multiple phasing, drill stacked or welded assemblies. Stinger(TM) drills require flood coolant only, and in some cases cut dry. Small Diameter drills provide smooth chip flow. Coremaster(TM) drills allow cored holes to be straightened in one...

Read More »
End Mills machine broad range of materials.
End Mills

End Mills machine broad range of materials.

Manufactured from premium M42 Cobalt steel, Roughing End Mills can be used to machine steel, stainless steel, titanium, cast iron, nickel, copper, aluminum, and magnesium. They have all-ground roughing profile with center cutting end tooth geometry that allows for plunging and profiling. Uncoated, TiCN and TiCN surface finishes are available. APPLIX(R) MX Series DIN overall length production taps...

Read More »
Hand (Tool) Clamps

Carpenter's Tool holds up cabinets, drywall, and ceilings.

T-JAK(R) support plate is suitable for installing cabinets, drywall ceilings, crown molding, and ridge rafters. Once in place, it can be locked by straightening adjustment knob, then tightening it. Support can adjust from 53 to 84 in. and support loads up to 400 lb. Assortment of extensions increase span up to 10 ft. Also available is Mini-Brute(R), which has a range of 15 to 24 in, to install...

Read More »
Crimping Tools offer high speed operation.
Hand Crimpers

Crimping Tools offer high speed operation.

Y500CTHS L'IL CRIMP(TM) Hydraulic crimp tool requires only 7 strokes to advance ram prior to crimping lug. It features wire range capacity of #8 AWG through 500 Kcmil copper, and permanent D3 die groove. BCT500HS BATOOL(TM) incorporates Makita tool base, motor with replaceable brushes, and 3-piston pump. Both crimp tools accommodate all W series dies and offer 180 deg rotating, stainless steel...

Read More »
Cable Ties are available in weather-resistant designs.
Cable / Wire Ties

Cable Ties are available in weather-resistant designs.

Tie-Max(R) cable ties are designed for mounting and non-mounting applications. Tensile strength ranges from 18 to 175 lb, with cable lengths of 3.78 in. to 30 in. Tensile strength of mounting cables is 18 to 50 lb, in lengths of 3.94 in. to 8.07 in. Weather-resistant Tie-Max ties have UV-resistant Carbonate A added. Pocket-sized hand tools and tie guns tighten and cut cable.

Read More »
Ratchet Wrench works in tight spots.
Wrenches

Ratchet Wrench works in tight spots.

Quick Twist has differential gearing system that turns socket by twisting grip handle, using regular rotation, or using both actions at same time to speed up nut tightening or loosening. Constant drive makes socket spin in selected direction regardless of which way grip is twisted. Direction can be changed via switch mechanism located on top. It has 3/8 in. drive, twin pawls, double ring gears,...

Read More »

All Topics

COVID-19 Response Suppliers COVID-19 Response:
Can Your Company Help Provide Critical Supplies?

We are using the power of our platform to aid in the mass shortage of critical supplies. If your company can help provide supplies, capabilities, or materials for products such as N-95 Masks and Tyvek SuitsPlease let us know.

COVID-19 Response Suppliers