Ports

Load Port handles 300 mm semiconductor wafers.

Automated IsoPort(TM) has front-opening-unified-pod (FOUP) tool carrier interface, servo-controlled motion, latchkey, and carrier sensing. Tool throughput is 8 sec, from carrier arrival to first-wafer access. Contamination control conforms to ISO Class 1 particle level, and eliminates triboelectric charge buildup on carrier door. Optional gas purge ports provide an inert ambient environment for...

Read More »
Duct Rodders come in any length.
Cleaning Equipment

Duct Rodders come in any length.

Available in 1/4, 5/16, 7/16 and 9/16 in. dia, duct rods are supplied in lengths specified by customer. Fiberglass rods, made from E-Glass+ Vinylester, provide high tensile strength and flexibility. Glass-fiber core is reinforced with high-strength resin, and reinforced wrap is added before UV-stabilized, wear-resistant, protective propylene coating is applied. Rods are wound on lightweight,...

Read More »
Welding Fixture handles prototypes.
Tooling Fixtures

Welding Fixture handles prototypes.

With Demmeler modular fixturing system, fixtures for prototypes, specials, spares, or any other short run welding job can be ready in four hours or less. It includes full range of components to fixture virtually any part. Engineering changes are easily handled. Duplicate fixtures can be ready in 20 min.

Read More »
Hand Held Drills

Hammer Drills are cordless and keyless.

Cordless 14V Model DV14DV and 18V Model DV18DV 1/2 in. hammer drills have impact rates of 0 to 18,000 beats/min (BPM) and 0 to 22,500 BPM, with torque of 346 and 400 lb-in., respectively. With turn of selection dial on head of drill, tools can switch from serving as driver drill to hammer drill. Both have one-touch speed shift knob, adjustable slip-clutch with 22 stages, fan-cooled motors, and...

Read More »
Bimetal Saw Blade outlasts carbon steel ten times over.
Blades

Bimetal Saw Blade outlasts carbon steel ten times over.

Model 3861 Sandflex(R) NF(TM) bimetal bandsaw blade lasts 8 to 10 times as long as common milled carbon steel blades when sawing wood, plastics, and metals from foundry metals through alloy steels. Bimetal blade has high speed steel teeth beam-welded to spring steel back. Suitable for job shops and tool rooms, blades are available in sizes from 1/4 to 1 in. with 3 to 24 teeth-per-inch pitch.

Read More »
Laser Systems cut accurately.
Cutters and Cutting Machinery

Laser Systems cut accurately.

Z-1 and Z-2 Laser Cutting Systems combine rigidity and accuracy of VMC with Coherent Diamond-Series CO2 pulsed lasers. Z-1 has 100 W laser and 16 x 12 x 10 in. (XYZ) travel, making it suitable for etching, engraving and cutting small metallic and non-metallic parts. Z-2 has 500 W laser and travels of 40 x 20 x 25 in. Both are available with 4th and 5th axis, providing ability to tackle...

Read More »
Laser Scribing System is used for photovoltaic panels.
Marking Equipment

Laser Scribing System is used for photovoltaic panels.

Laser Scribing System provides beam delivery optics with automatic spot size variability, and multiple independent positioned beams. It features granite based, high speed linear motor/encoder X-Y motion systems, straight to within +/- 0.00075 in. over 8 ft of travel. System offers fully automated material handling for parts up to 3 ft x 6 ft. Process generated debris is removed for high...

Read More »
Drills have integral shank.
Drills

Drills have integral shank.

HOLESHOT(TM) Drills combine integral-style drill/shank combination with cost-saving benefit of purchasing separate components. Shanks are available in CAT, BT and ABS(R) styles and can be ordered with drills from 0.875 to 4.0 in. and 22 to 63 mm.

Read More »
Intelligent Torque Tools communicate with controller.
Torque Wrenches

Intelligent Torque Tools communicate with controller.

Series 66 includes right-angle flanged head, right-angle sliding spindle, offset, tubenut, crowfoot, and pistol-grip nutrunners. Standard right-angle configurations are available in 25 to 200 Nm range, while sliding spindle tools come in 40 to 160 Nm. All contain internal microprocessor inside tool handle. Setup and calibration is automatic upon connection of tool to company's CS4000 or CS5000...

Read More »
Tap Extensions come in sets.
Taps

Tap Extensions come in sets.

Line of 5 and 9 in. long tap extensions are available individually or in sets of nine sizes. Extensions are made from high quality tool steel for strength and durability, and have slim profile design that fits into tight places not accessible to conventional tap extensions. Compression cap provides easy tightening, with no wrench required. Integral compression collet eliminates need for collet...

Read More »
Fresh Air Intake Designed to Meet ASHRAE 62.2 standards
Sponsored

Fresh Air Intake Designed to Meet ASHRAE 62.2 standards

Alan Manufacturing has a long history of developing innovative solutions for HVAC applications. With over 1,000 product designs under our belt, we have gained a reputation as the go-to source for HVAC dampers, hardware, duct supports, zone control systems, and much more. Adding to this extensive list of achievements we now announce the release of our new line of Fresh Air Intake products. Designed to meet ASHRAE 62.2 standards, they are the most robust and high-performance product of their kind. See our video to learn more.

Read More »

All Topics

COVID-19 Response Suppliers COVID-19 Response:
Can Your Company Help Provide Critical Supplies?

We are using the power of our platform to aid in the mass shortage of critical supplies. If your company can help provide supplies, capabilities, or materials for products such as N-95 Masks and Tyvek SuitsPlease let us know.

COVID-19 Response Suppliers