Horizontal Production Bandsaw is fully automatic.

Horizontal Production Bandsaw is fully automatic.

Model 7112A, 12 in. bandsaw has precision carbide and ball bearing blade guide assemblies mounted on dual adjustable arms. It provides proper blade alignment, blade support, and consistent square cuts. Equipped with direct drive gearbox and motor drive system, saw blade is powered without use of belts. Model 7112A includes AC inverter, infinitely variable speed control (65 to 400 sfm), fully...

Read More »
Wafer Scribing System offers alternative to diamond scribing.

Wafer Scribing System offers alternative to diamond scribing.

AccuScribe-SS20 laser-based sapphire wafer scribing system processes 350 x 350 -µm dies on 50 mm wafers at rate of 40 minutes per wafer. Channel depth is 30 -µm and channel width is 12 -µm. System accommodates blue film expansion frames, performs both full and partial wafer scribing and features automatic edge detection capability. Positive pressure, vacuum venting debris control and removal...

Read More »

Software provides flexible transaction sorting.

Routing and Transit with Check Truncation Enhancement, for Image Export Module (IEM) on System 150 and MPE 7.5, allows transactions to be sorted based upon any combination of routing and transit bank number, including check account number. It sorts truncatable transactions and non-truncatable transactions into separate pockets. Software supports up to 8 different check classifications, which are...

Read More »
Grinder/Sander is designed for heavy-duty use.

Grinder/Sander is designed for heavy-duty use.

TOP CAT-® Model 520VK vertical grinder/sander is available in versions that include 7 or 9 in. configurations for both Type 27 or Type 28 grinding wheels; and 4, 5, or 7 in. sizes for sanding discs. Wheel guard version includes drive flange wrench, while sanding pad version comes with sanding disc mounting nut and wrench. Tool has 1,500 W, 2 hp motor with rated speeds of 6,000-12,000 rpm. All...

Read More »
Air Amplifiers and How They Work
Sponsored

Air Amplifiers and How They Work

Air amplifiers are pneumatically driven devices that use shop air to provide the motive power for increasing air pressure. This white paper provides an in-depth overview into the air amplifiers and how they work.

Read More »
Gouging Torches suit metal removal applications.

Gouging Torches suit metal removal applications.

EXTREME(TM) Gouging Torches include Angle-Arc-® Manual Gouging Torches, Straight Handle Manual Gouging Torches, and Tri-Arc Foundry Gouging Torch with 3 interchangeable heads. They offer 4-barrel air nozzle designs that optimize air flow to arc for cleaning slag from groove edge. Suitable for operation in areas where noise cannot exceed 115 dB, torches achieve acceptable grooves and suit weld...

Read More »
Portable Drill bores through tough alloys.

Portable Drill bores through tough alloys.

Model HMD904 has drilling capacity of up to 1-½ in. diameter and 2 in. depth of cut. Magnetic base provides 820 lbs. drill point breakaway force rating. It incorporates Hougen motor with electrical rating of 115 V, 60 Hz and 8.0 A to maintain cutting speeds and feeds. Design includes rear-mounted controls; side-to-side, reversible feed-handle configuration; motion sensor; and 2-stage, power-on...

Read More »
Power Screwdriver suits high-torque applications.

Power Screwdriver suits high-torque applications.

Corded USE 8, with 4.8 A motor, provides 10 adjustable torque settings from 27 to 159 lb-in. and torque and depth-stop switch-off. Rigid-drive setting provides up to 354 lb-in. torque. Tool handles self-drilling screws with up to 1/4 in. diameter, self-tapping screws with up to 5/16 in. diameter, and drywall and wood screws from 1/8 to 5/16 in. diameter. It offers 2-piece depth stop, adjustable...

Read More »

Pump Pliers feature comfort grip.

Journeyman(TM) Pump Pliers measure 10 in. and have 6 machined tongue-and-grooves for smooth adjustments up to 1-¾ in. Soft, outer-surface handle material combines comfort with firm grip, while harder, inner-surface handle material is designed for toughness in harsh work environments. Pliers feature induction-hardened jaws, tension-loaded joint to reduce handle wobble, contoured thumb area, and...

Read More »
Die-Cutting System handles delicate materials.

Die-Cutting System handles delicate materials.

Multiple Roll Die-Cutting System handles nonwoven roll material with low-tension pull to avoid stretching. Webs from multiple rolls are brought through ultrasonic welder (to combine material) and inkjet printer (to print part numbers and lettering). Optically registered, belt-fed die-cutter cuts out finished parts, which are then removed from belt onto conveyor for operator collection.

Read More »
Laser offers choice of resonators.

Laser offers choice of resonators.

STX-44 high-speed CO2 laser cutting system offers sheet metal fabricators choice of 1,500-, 2,500-, or 4,000-watt resonators. Mild steels up to 1 in. thick can be cut with the 4,000 watt system. All systems feature 4 ft x 4 ft bed, Meehanite frame, completely enclosed cutting area, and dust collector that meets FDA Class 1 safety standards. System programs easily either on the machine or...

Read More »

All Topics