Cutting Tools are available with 4 insert geometries.

Toroid Cutting Tools include 12 Shell Mills in ODs from 2-8 in. and come with round, square, high-feed, and octagonal insert geometries for optimal application versatility. Octagonal Inserts have 8-sided geometry for general face milling capabilities. Their 45-

Read More »
Safety Clamp is suited for hygienic/sanitary connections.

Safety Clamp is suited for hygienic/sanitary connections.

Used to connect ferrules in sanitary process applications, SH Style Safety Clamp features swing bolt that cannot come off fork of clamp due to vibration and temperature cycling, and cannot unlatch while under pressure or before wing-nut has been sufficiently loosened. Standard in 316 SS, clamp incorporates 2-pin hinge for uniform compression on gasket. It is available for tube OD sizes from 1/2-4...

Read More »
DE-STA-CO to Showcase a Wide Variety of Workholding and Automation Solutions at WESTEC 2007

DE-STA-CO to Showcase a Wide Variety of Workholding and Automation Solutions at WESTEC 2007

Auburn Hills, Michigan, January 4, 2007 - DE-STA-CO's 2000 series of Horizontal Handle Hold-Down Action Clamps will be displayed in the company's booth at WESTEC 2007. This latest generation of manual toggle clamps will be showcased along with the DE-STA-CO Toggle-Lock Plus Manual Clamp Series, RZA Table-Top Linear Thruster Slide and DPQ Parallel Gripper. DE-STA-CO will be located in booth #4344...

Read More »
MTS Sensors Measure Stroke in Machine Fixture Set-Up Clamps

MTS Sensors Measure Stroke in Machine Fixture Set-Up Clamps

CARY, N.C (January 5, 2007) - MTS Systems Corp., Sensors Division Temposonics® C-Series sensors are currently being embedded into actuators of automatic fixture set-up clamps to provide confirmation that the clamp is in position prior to machining, welding or other fabrication operations. Providing accurate measurement of stroke, an embedded C-Series continuous position sensor located inside the...

Read More »
Step Drills feature TiN coating for extended life.

Step Drills feature TiN coating for extended life.

Intended for professional users, Step Drills feature titanium nitride coating for minimized friction. All units have 3 flats ground on shank, preventing drill from slipping in drill chuck. Balanced double flute provides 2 cutting edges for cutting in virtually any soft or hard material. Available with -¼ and 3/8 in. shanks, step drills are suited for electrical contractors, sheet metal workers,...

Read More »

Hammerdrill handles wood, steel, or masonry applications.

Featuring 8.2 A motor, 5.3 lb DW520K -½ in. hammerdrill offers 0-1,000/3,000 rpm and 0-19,000/0-46,000 bpm. Tool features dual drilling modes, and has 5/8 in. capacity in masonry, -½ in. in steel, and 1-½ in. in wood. Unit includes 2-speed gear box for adjustment to high-speed or high-torque applications, soft grip handle, and 360-

Read More »
Hammer Drill features ½ in. keyless chuck.

Hammer Drill features ½ in. keyless chuck.

With input rating of 1,010 W, Model SBE1010 Plus offers max tightening torque of 248 lb-in., no-load speed of 0-900 or 0-2,600 rpm, and 0-50,000 no-load bpm. It provides capacity of -¾ in. in concrete, 5/8 in. in mild steel, and 1-½ in. in soft wood. Under extreme conditions, Vario Tach Constamatic speed stabilization increases efficiency by working at nearly 100% of no-load speed up to full...

Read More »
Deep-Hole Drill works with aluminum and copper alloys.

Deep-Hole Drill works with aluminum and copper alloys.

EXOCARB-® MAX-OIL-AL drill incorporates double margin design for optimal stability, enabling production of consistent, concentric holes from entry to exit at up to 30x diameter. Double margin design also has burnishing effect on material, promoting optimal surface finish quality. While flute design creates small, manageable chips, coolant-through center facilitates chip evacuation. Polished...

Read More »
Precision Fastening Tools promote operator comfort.

Precision Fastening Tools promote operator comfort.

Weighing 1.8-3 lb, Q Series pulse tools include 6 transducerized and 6 non-transducerized models suited for assembly and industrial professionals. Design minimizes vibration, reaction force, and necessary trigger force. Coated blades extend tool life, and mechanisms for sealing protect against contaminants. Transducerized and non-transducerized models use lube-free, dual chamber air motor and...

Read More »
Plasma Torches have attachment to speed cartridge changes.

Plasma Torches have attachment to speed cartridge changes.

Series XT-300 and XT-301 are offered with SpeedLok attachment design, which facilitates user installation and precise locking of consumable cartridge assembly into torch body. To accelerate changing of consumable parts, only one-half turn is required to fully engage and lock cartridge retainer ring onto torch body. SpeedLok design is also available as retrofit by replacing torch head and retainer...

Read More »
Sentry Equipment Introduces New Compact Hygienic Automatic Sampler
Sponsored

Sentry Equipment Introduces New Compact Hygienic Automatic Sampler

As a leader in industrial sampling equipment at Sentry Equipment, our success is built on a history of innovation and designs that epitomize value and efficiency. The new Hygienic Automatic Sampler is another example of our dedication to developing quality engineered products. To learn how this product can streamline the sampling process for dry, free-flowing materials, see our new video.

Read More »

All Topics