Step Drills feature TiN coating for extended life.
Drill Bits

Step Drills feature TiN coating for extended life.

Intended for professional users, Step Drills feature titanium nitride coating for minimized friction. All units have 3 flats ground on shank, preventing drill from slipping in drill chuck. Balanced double flute provides 2 cutting edges for cutting in virtually any soft or hard material. Available with Â-¼ and 3/8 in. shanks, step drills are suited for electrical contractors, sheet metal...

Read More »
Hand Held Drills

Hammerdrill handles wood, steel, or masonry applications.

Featuring 8.2 A motor, 5.3 lb DW520K Â-½ in. hammerdrill offers 0-1,000/3,000 rpm and 0-19,000/0-46,000 bpm. Tool features dual drilling modes, and has 5/8 in. capacity in masonry, ½ in. in steel, and 1½ in. in wood. Unit includes 2-speed gear box for adjustment to high-speed or high-torque applications, soft grip handle, and 360° side handle with depth rod for control...

Read More »
Hammer Drill features ½ in. keyless chuck.
Hand Held Drills

Hammer Drill features ½ in. keyless chuck.

With input rating of 1,010 W, Model SBE1010 Plus offers max tightening torque of 248 lb-in., no-load speed of 0-900 or 0-2,600 rpm, and 0-50,000 no-load bpm. It provides capacity of Â-¾ in. in concrete, 5/8 in. in mild steel, and 1½ in. in soft wood. Under extreme conditions, Vario Tach Constamatic speed stabilization increases efficiency by working at nearly 100% of no-load speed up...

Read More »
Deep-Hole Drill works with aluminum and copper alloys.
Drill Bits

Deep-Hole Drill works with aluminum and copper alloys.

EXOCARB® MAX-OIL-AL drill incorporates double margin design for optimal stability, enabling production of consistent, concentric holes from entry to exit at up to 30x diameter. Double margin design also has burnishing effect on material, promoting optimal surface finish quality. While flute design creates small, manageable chips, coolant-through center facilitates chip evacuation. Polished...

Read More »
Distillation 101: A Guide to Distillation and Separation Technologies
Sponsored

Distillation 101: A Guide to Distillation and Separation Technologies

Distillation is a separation unit operation that involves multiple countercurrent-stage steps, separating two or more volatile components. This results in the contact of liquid and vapor most generally in counterflow. Distillation 101: A Guide to Distillation and Separation Technologies provides an in-depth look at everything you need to know about distillation, including: Design procedures Equipment components Applications

Read More »
Plasma Torches have attachment to speed cartridge changes.
Torches

Plasma Torches have attachment to speed cartridge changes.

Series XT-300 and XT-301 are offered with SpeedLok attachment design, which facilitates user installation and precise locking of consumable cartridge assembly into torch body. To accelerate changing of consumable parts, only one-half turn is required to fully engage and lock cartridge retainer ring onto torch body. SpeedLok design is also available as retrofit by replacing torch head and retainer...

Read More »
Precision Fastening Tools promote operator comfort.
Fastening Systems

Precision Fastening Tools promote operator comfort.

Weighing 1.8-3 lb, Q Series pulse tools include 6 transducerized and 6 non-transducerized models suited for assembly and industrial professionals. Design minimizes vibration, reaction force, and necessary trigger force. Coated blades extend tool life, and mechanisms for sealing protect against contaminants. Transducerized and non-transducerized models use lube-free, dual chamber air motor and...

Read More »
Scaler converts to different units of measure.
Scalers

Scaler converts to different units of measure.

Offered in gallons, K-factor Scaler converts or scales turbine meter output into desired units of measurement and is recognized by almost any data collection device. Switch-selectable version has set of 8 rotary switches within enclosure, while programmable version comes precalibrated from factory when ordered with Series 1100 turbine meter.

Read More »
BONDHUS - The "GO TO" Company for NASA
Screwdrivers

BONDHUS - The "GO TO" Company for NASA

Bondhus Corporation is once again working with a NASA contractor on a tool for a critical repair in space. In 2005, astronauts used a Bondhus Stubby tool on a repair to the International Space Station. Now Bondhus ProHold® tools are being tested for a repair mission to the Hubble Space Telescope. ProHold® tools were chosen because they hold the screw on the tool tip, a critical...

Read More »
Tungsten Carbide Burs feature anti-friction coatings.
Rotary Files

Tungsten Carbide Burs feature anti-friction coatings.

Whether used for high stock removal or fine machining and deburring, HICOAT® tungsten carbide (TC) burs have proprietary coatings that promote chip removal while minimizing tool wear and heat loads. Available coatings include HC-FE multipurpose, gold coating for work on steel and cast iron; HC-HT silver coating for work on heat-resisting, nonferrous metals; and HC-NFE black, anti-adhesive...

Read More »
Laser suits general construction aligning and leveling tasks.
Controls and Controllers

Laser suits general construction aligning and leveling tasks.

Rugby 55 features easy-to-use keypad, watertight seal, variable head speeds, selectable scanning modes, bright red beam, and alkaline or rechargeable NiMH battery pack. Scan-90 feature moves scanning or stationary beam in 90° intervals through each of 4 axes, while beam down mode positions beam below laser when doing layout work. Sleep Mode helps conserve battery life. Mounted on tripod or...

Read More »
Precision Machining Solutions with Over 25 Years of Experience
Sponsored

Precision Machining Solutions with Over 25 Years of Experience

Quality, customer service, and unbeatable value are the hallmarks of Hogge Precision. Since 1989 we have built a reputation as the go-to precision machining source, servicing many demanding industries. For CNC machining and screw machining, there are few manufacturers that can match our capabilities and expertise. See our video to learn more.

Read More »

All Topics

COVID-19 Response Suppliers COVID-19 Response:
Can Your Company Help Provide Critical Supplies?

We are using the power of our platform to aid in the mass shortage of critical supplies. If your company can help provide supplies, capabilities, or materials for products such as N-95 Masks and Tyvek SuitsPlease let us know.

COVID-19 Response Suppliers