New TC115 and TC216 Taps Made From Steel to Aluminum
Metric threads include M16, M2 and M2.5 for both blind and through hole taps. TC115 has a 45° helix angle and C-form chamfer. TC216 through-hole tap features spiral point for forward chip evacuation and a thread depth capability of 3.5×D.
Read More »
New PowerLine C Laser-Based Sub-System Comes with StarFlex Software
Housed in 19 in. rack mount, uses standard interface for network connections under Windows 10, and communicates using standard CAN bus technology. Offers combination of convenience, versatility, and economy for precision drilling, cutting, scribing, structuring, marking, and engraving of a wide range of materials. Incorporates sealed CO2 laser (available output powers of 180 W, 250 W, and 450 W),...
Read More »
New PowerLine C Laser-Based Sub-System Comes with StarFlex Software
Housed in 19 in. rack mount, uses standard interface for network connections under Windows 10, and communicates using standard CAN bus technology. Offers combination of convenience, versatility, and economy for precision drilling, cutting, scribing, structuring, marking, and engraving of a wide range of materials. Incorporates sealed CO2 laser (available output powers of 180 W, 250 W, and 450 W),...
Read More »
New TGA330 Series Power Adapters Meets IEC 62368-1 Standards and are RoHS Compliant
Achieves power density greater than 100W/cubic in. and has operating temperature ranging from 0°C to +70°C. Operating at a 90 to 264 VAC universal input and supports operating altitudes up to 5,000 meters. Measuring 7.87” (L) by 3.94” (W) by 1.06” (H) size and is available with either a 19.5V or 24V output.
Read More »
New TGA330 Series Power Adapters Meets IEC 62368-1 Standards and are RoHS Compliant
Achieves power density greater than 100W/cubic in. and has operating temperature ranging from 0°C to +70°C. Operating at a 90 to 264 VAC universal input and supports operating altitudes up to 5,000 meters. Measuring 7.87” (L) by 3.94” (W) by 1.06” (H) size and is available with either a 19.5V or 24V output.
Read More »
New KSX-C Clamping Vises from SCHUNK Comes with 5-Axis and Adjustable Center
Available in four base body lengths (330 mm, 430 mm, 500 mm, and 630 mm) and in two heights each (174 mm and 125 mm). Equipped with two jaws, which can be moved by a laser-etched ruler and offers ample power for a safe hold even with minimum clamping surfaces. Features 160° quick clamping in vibration resistant manner and at a high repeat accuracy.
Read More »
New KSX-C Clamping Vises from SCHUNK Comes with 5-Axis and Adjustable Center
Available in four base body lengths (330 mm, 430 mm, 500 mm, and 630 mm) and in two heights each (174 mm and 125 mm). Equipped with two jaws, which can be moved by a laser-etched ruler and offers ample power for a safe hold even with minimum clamping surfaces. Features 160° quick clamping in vibration resistant manner and at a high repeat accuracy.
Read More »
New LineShot Flushing Tool from RectorSeal is ideal for Access Cleanout Fittings
Features 5-1/2-inch-long (140-mm), lightweight hand-held that dispenses a 250-psi (17.2-bar) pressurized burst from a recyclable CO2 cartridge to flush debris from blocked condensate drain lines. Comes with ergonomic handle-shaped body that features a non-slip, thumb-activated trigger that fires air stream once the red safety lever is released. Offers tapered design that allows service techs to...
Read More »
New LineShot Flushing Tool from RectorSeal is ideal for Access Cleanout Fittings
Features 5-1/2-inch-long (140-mm), lightweight hand-held that dispenses a 250-psi (17.2-bar) pressurized burst from a recyclable CO2 cartridge to flush debris from blocked condensate drain lines. Comes with ergonomic handle-shaped body that features a non-slip, thumb-activated trigger that fires air stream once the red safety lever is released. Offers tapered design that allows service techs to...
Read More »
New DaVinci DCS 50 Laser Cutting System Reduces Diamond Polishing Processes
Features 5-axis CNC machine that recognizes when a cut is finished and automatically initiates facet changing. Comes with Laser MicroJet technology that cools diamond surface during laser ablation and reduces the risk of rough diamond cracking with stress stones. Offers water jet that maintains laser's focus creating a cylindrical laser beam resulting in perfectly parallel walls and tight kerf...
Read More »
Fresh Air Intake Designed to Meet ASHRAE 62.2 standards
Alan Manufacturing has a long history of developing innovative solutions for HVAC applications. With over 1,000 product designs under our belt, we have gained a reputation as the go-to source for HVAC dampers, hardware, duct supports, zone control systems, and much more. Adding to this extensive list of achievements we now announce the release of our new line of Fresh Air Intake products. Designed to meet ASHRAE 62.2 standards, they are the most robust and high-performance product of their kind. See our video to learn more.
Read More »
