Miter Saw uses laser to show exact line of cut.

Miter Saw uses laser to show exact line of cut.

Model 36-255L 12 in. compound miter saw incorporates TwinLaser(TM) system that shows line of cut on either side of blade kerf, at any angle. It features 15 A, 120 V motor and large bevel scale with adjustable positive stops at 0-° and 45-°. Sliding fences adjust for increased support, and are extra tall for handling large workpieces. See-through blade guard covers 40-tooth carbide-tipped blade...

Read More »

Tool Storage Unit provides 66,628 cu in. of storage.

KRL1004 is 108 7/16 in. x 29 1/32 in. x 45 7/8 in. (w x d x h) with 12,000 lb capacity. It has 28 drawers in variety of widths and heights. Stainless steel work surface offers more than 1,500 sq in. of workspace. Eight spring-loaded, heavy-duty casters provide mobility and lock when unit is stationary. End casters are equipped with swivel locks, which allow unit to pivot into optimal working...

Read More »

Drills/Drivers use variable speed, reversing technology.

ShopMaster(TM) cordless drills/drivers include model CL096 (9.6 V), model CL120 (12 V), model CL144 (14.4 V), and model CL180 (18 V). Model CL180 employs 1/2 in. keyless chuck, while CL096, CL120, and CL144 incorporate 3/8 in. keyless chucks. Their 20-position, adjustable clutch allows users to choose torque settings. High and low rpm ranges are 0 to 1050 and 0 to 315 rpm for CL120; 0 to 1100 and...

Read More »
Miter Saw includes front bevel lock system.

Miter Saw includes front bevel lock system.

Model MS350 10 in. compound miter saw utilizes 15 A, 120 V (5,200 rpm) motor, and features 7 adjustable positive stops on front bevel. It crosscuts nominal 2 x 6 or 4 x 4 at 90-° and miters 2 x 4 flat or on edge at 45-° both right and left. Miter indexing mechanism allows user to alternate between angles thanks to stops located at 0-°, 22.5-°, 31.62-°, and 45-° to right and left. Electric...

Read More »
Electric Drills come in 3/8 in. and 1/2 in. models.

Electric Drills come in 3/8 in. and 1/2 in. models.

Models 2610 and 2611 are 3/8 in. drills with Yukiwa keyless chuck and keyed chuck, respectively. Both have 7 A, 0-2,500 rpm variable speed motor. Models 2614 and 2615 are 1/2 in. drills with Yukiwa keyless chuck and keyed chuck, respectively. Both have 7.8 A, 0-850 rpm variable speed motor. All drills utilize magnesium bearing plate and precision-machined, hardened gears. They offer multiple...

Read More »
Electric Screwdrivers endure repetitive use.

Electric Screwdrivers endure repetitive use.

Electric Screwdriver series includes Model 4630 (0 to 5,000 RPM drywall screwdriver), Model 4634 (0 to 2,500 RPM deck/drywall screwdriver), and Model 4640 (0 to 2,500 RPM Teks(TM) and nut driver). Each features variable speed 6.8 Amp motor, 100% ball and needle bearing construction, and precision machined and hardened steel gearing and clutches. Construction includes cast aluminum gear housings,...

Read More »
Electric Shears provide 0 to 2,500 strokes/minute.

Electric Shears provide 0 to 2,500 strokes/minute.

Model 6603 steel shear and Model 6605 fiber cement shear feature cast aluminum gear housing, magnesium bearing plate, and double-insulated 6.8 A motor. Model 6603 has 18 ga steel and 20 ga stainless steel cut capacities, with ability to make 7/32 in. cut with no bending or burring. Model 6605 cuts fiber cement siding up to 5/16 in. thick. Both include 360Â-

Read More »
Cutting Torch cuts, burns, and pierces tough materials.

Cutting Torch cuts, burns, and pierces tough materials.

ArcairÂ-® SLICEÂ-® cutting system handles virtually any metallic, non-metallic, or composite material, including bridge steel, concrete-lined pipe, and highway guardrails. Torch requires no preheating. Operators supply oxygen and welding machine, or 12 V battery for portable applications. Torch has pistol grip, operator shield for protection from heat and sparks, squeeze lever for oxygen...

Read More »
Plier Clamps offer 3rd hand for single-hand operation.

Plier Clamps offer 3rd hand for single-hand operation.

STA-Grip(TM) clamps come in 5 carbon steel models. Three models are available in non-magnetic stainless steel option. Holding capacities range from 225 to 674.5 lbs of pressure. Moveable pressure pads conform automatically to shape of workpiece, distributing pressure evenly and protecting vulnerable surfaces. Clamps are suitable for compact work areas ranging from delicate woodworking operations...

Read More »

All Topics