New Portable Tools Products

Single Station Vises offer 0.0005 in. clamping repeatability.

Available in manual, reverse, and hydraulic versions, 8 in. VersatileLock-® Vises feature one-piece 80,000 psi ductile iron body and stationary jaw integrated with Anglock-® feature.- Pull type clamping design prevents parts from lifting upward under heavy clamping loads. Offering 10 in. jaw opening, manual version can be mounted upright or on either side, while hydraulic model provides- -¼...

Pipe Press Kits feature blow-molded carrying case.

Weighing 21 lb lighter than previous models to facilitate carrying on and off jobsite, MegaPress-® Kits include RIDGID Press Tools, Jaws, Rings, and Prep Tools built for demanding applications. Flameless system eliminates need for hot work permits. Press connections can be made on wet system. Kits include -½–2 in. Full MegaPress Kit and -½–1 in. Jaw-Only MegaPress Kit.

Cordless Impact Wrench delivers precise fastening control.

Combining extended run time of brushless motor technology with 18V LXT-® Lithium-Ion 4.0 Ah battery, Model XWT02M provides 3 speed settings for fastening applications with -½ in. sockets. Low, Medium, and High Speed settings offer speeds from 0–1,600, 0–2,100, and 0–2,800 rpm with 0–1,800, 0–2,600, and 0–3,500 impacts/min, respectively. Star Protection Computer Controls™ allow...

Hinged Shaft Collars accelerate pipe and tube changes.

Facilitating open-close operations as well as clamping by hand, Staff-Lok™ Hinged Shaft Collars feature integral hinge with conformal cam lever for clamping and knurled nut for adjusting clamping preset. Design, with mounting flat with countersunk hole and attachment screw, is suited for securely mounting pipe and tube requiring frequent or fast changes. Eliminating need for tools, collars are...

The Ultimate Guide to Understanding Mobility

This eBook discusses technology advancements and mobility trends amongst a range of industries.

Insulating Suspension Clamp comes with preloaded nail.

Available in -½, -¾, and 1 in.- CTS sizes, Single Shot-® is- compatible with copper, CPVC, and PEX tubing and offers plumbers various- options for facilitated installation. Key-hole closure assists in pre-hanging of pipe; installer can pre-set nail to joist, slide pipe into clamp, and then set nail. Installer may also slide pipe into Single Shot and then nail it into joist. Stabilizing foot...

Automatic Hitch Feed Saw offers fully programmable operation.

With 30 in.- linear actuator driven by- servo motor and 315 mm blade, CPO 315 HFA-CNC can cut up to 3 -½- in. dia tubes or pipe and up to 1- -¾ in.- solid material while maintaining- length tolerance of -

Controller and Optical Adapter complement UV LED systems.

When connected to OmniCure AC Series UV LED head, OmniCure PLC2000 enables integration with system to intelligently manage, monitor, and control curing solution. Unit can dynamically adjust output intensity, exposure time, and on/off capabilities while providing system information and error monitoring. Used with OmniCure AC4 and AC7 Series UV LED systems, AC Optical Adaptor creates evenly...

Ergonomic Scissor cleanly cuts difficult threads, cords, yarns.

Designed for cutting threads, cords, and yarns that are waxed, fluffy, soft, and slippery, Model 441 Thread & Cord Scissor is ergonomically designed with open handles for comfortable fit in smaller hands. Design does not have any finger loops and includes soft rubber grips and- Light-Touch™- return spring. Sharp, tapered cutting blades feature one serrated edge for holding threads, cords, and...

Cable Termination Tool exceeds 10-Gig performance standard.

Combining 2 crimpers into single tool for 2-step crimping, Tele-Titan™ Xg 2.0 terminates to industry-specified crimp heights while achieving straight action crimp with minimal hand force. Tool features S45C carbon steel frame with rust-resistant black oxide finish and gun-style lock for secure closure.- Suitable for use with Cat6E, Cat6A, Cat7, and over-sized Cat5e/6 industrial Ethernet...

Pneumatic Chain Saws feature patented chain brake.

Equipped with 4 hp motor that consumes 92 cfm of air at 90 psi, Series 5 1026, 5 1027, 5 1028, and 5 1029 are available with cutting capacity of 15, 17, 21, or 25 in. Units include Armor Tipped Guide Bar, Super Chisel saw chain 404 pitch,- two separate oil lubricating systems for chain and motor, and chain brake that stops chain movement during kickback or repositioning of saw during cutting....

Triad's Next-Gen Power Supplies Offer Increased Reliability and Reduced Noise Performance

Triad Magnetics, an established leader in power supply design and manufacturing, is proud to announce their next generation WAU AC and WDU DC Series of power supplies. These linear wall plug-ins offer minimum noise performance without sacrificing reliability or life. See our video to learn more.