Lenzkes Clamps Keep Terminator in Place
CHICAGO — Only the modernistic clamping force of Lenzkes Clamping Tools Inc. can hold down Terminator 3. That's if you believe posters made from the stills of the new movie Terminator 3: Rise of the Machines, set for a July 2 release. The clamps holding down the Terminator are sold by Christianburg, Va.-based Lenzkes Clamping Tools, and made in Ludenscheid, Germany, by its parent Lenzkes...
Read More »
Clips and Clamps meet high-amperage requirements.
Available in black or red with heavy-duty, glass-filled polyamide handle and glass-filled nylon body, High-Amperage Clips include 300 A battery Model BU102B and kelvinized Model BU102BK as well as 400 A Model BU102W for grounding of welding equipment during operation. BU-102B clips feature serrated jaws, created from stamped 100% copperplate,Â- while BU-102W jaws are machined from 100%...
Read More »Successful Grinding Symposium 2014
Over a period of three days more than 1,400 visitors daily from all over the world experienced precision and passion in Thun (Switzerland) For the third time, the United Grinding Group held the largest symposium in the international grinding machine industry from 21 to 23 May in Thun (Switzerland). Making our customers more successful" was the central motto. A total of 30 machines from the Group...
Read More »
Air Impact Drivers weigh less than 2.2 lb.
Supplied inÂ- rugged metal housing measuring 6 in. in length, Models MP2264B and MP2265B are suited for heavy-duty industrial assembly and MRO applications. No-reaction tools utilize NBR synthetic rubber grip, providing protection against slip, chemicals, and vibration. In addition to swivel exhaust with silencer, drivers feature suspension bail for integration on assembly lines,...
Read More »
Saving Energy with Efficient Belt Drives
By introducing energy efficient belts on electric motor drives, you can implement a simple, cost-effective solution to achieve energy savings in your facility.
Read More »
Material Recovery Station separates liquids from solids.
Available in several sizes and capacities, on standard 44 x 44 in. footprint, MOD Material Recovery Station automatically separates liquids from solids to allow both to be collected and processed for recycling or for sale. Self-contained system sets plastic screening panel inside leakproof, reusable, ShipShape™ bulk plastic containers. Solid particles are screened and safely accumulated inside...
Read More »Lenthor Engineering (www.lenthor.com) Announces the Addition of ESI's 5335 UV Laser Drilling System
Milpitas, California –Â- Lenthor Engineering, a California based designer, manufacturer and assembler of RIGID-FLEX and FLEX printed circuit boards, announces the addition of ESI's 5335 UV Laser Drilling System. The 5335 incorporates ESI's patented fifth generation motion beam positioner, capable of up to 14,000 points per second, along with an optical system designed to support...
Read More »
Container Seals/Tubing are available in silicone and TPE.
Available for glass, metal,Â- and plastic containers used in pharmaceutical, biotech, laboratory, and other clean applications, BioClosure® biologically safe closures come in AdvantaFlex® biopharmaceutical grade thermoplastic elastomer (TPE) and platinum-cured silicone. AdvantaFlex exhibits minimal absorption and adsorption characteristics and does not...
Read More »Slide Compound Miter Saw features portable design.
Equipped with 8 Â-½ in. blade, Model LS0815F is powered by direct drive 10.5 A motor with soft start. Linear ball bearing system delivers smooth, dead-on accurate cuts. At 90°, saw has 12 in. crosscutting capacity, with 8 ½ in. capacity at 45° (miter). Model LS0815F miters 0–50° left and 0–60° right, with positive stops at 0, 15, 22.5, 31.6, 45,...
Read More »Mini DIN Adapters suit low PIM performance applications.
Both 4.1/9.5 (Mini) DIN male to female right angle (Part No. RFD-4195-1952) and straight (Part No. RFD-4195-1950) adapters have hex nuts on male interface sized to facilitate mating via torque wrench. Right angle part features radius internal design that provides constant 50 Ω impedance for optimum electrical performance to 7.5 GHz, and all adapters are manufactured with brass bodies in...
Read More »
Break-Over Torque Wrenches work on RF interconnect components.
Used to fasten connections between components and systems, 20+ beak-over type torque wrenches are available for multiple RF connector types: 1.0 mm, 2.4 mm, 2.92 mm, 3.5 mm, 7 mm, SC, SMA, SMC, SSMA, SSMC, Type N, and TNC designs. Available hex/bit sizes include 5/16, 5/8, 15/64, 5/32, 1/4, 9/16, 13/16, 3/4, and 25/32 in., and max torque values are preset and range from 2–14 lb-in....
Read More »
Custom Fabrication & Machining Services with Over 30 Years of Experience
As a trusted manufacturer to customers across a broad range of industries, Key Gas Components is a premier provider of CNC machining and tube fabrication. Our entire organization is quality driven and customer-centric, with broad-based manufacturing capabilities that can accommodate the most challenging requirements. See our video to learn more.
Read More »
