New Portable Tools Products

Cutting Machine cuts tubing, conduit, and wire.

SLICE 142 saves waste by allowing user to load 4 ft long, double-wall sticks of heat shrink tubing without cutting off long piece of material. It knows by length of piece to be cut how many pieces it can cut from 4 ft length. After cutting pre-calculated pieces, machine pauses and waits for next stick to be loaded.

Heavy-Duty 8-in-1 Tool has multi-purpose blade.

Allway BG1 Multi Tool features soft-grip, ergonomic handle over-molded with Santoprene rubber as well as precision-ground, stainless steel blade with chisel edge. Threaded end accepts standard extension poles, while nail-setting hammer-end unscrews to accept threaded extension pole for scraping or spreading jobs. Unit serves as paint scraper, glazier's knife, chisel, putty knife, tile remover,...

Vises offer repeatable part clamping solutions.

High Density Long Vise has two 4 in. capacity stations with hard jaws that provide repeatable clamping up to 0.001 in. Manual model delivers up to 6,316 lb clamping force at 70 lb torque, while hydraulic model provides 7,800 lb of force at 5,000 psi. Suited for holding very large parts, Model D810 has 10 in. jaw opening and 11,600 lb clamping force. Available in 4-face and 2-face models,...

Hammer Drill is portable and lightweight.

Cordless TE 2-A, 24 V Electropneumatic Hammer Drill performs rotary drilling, straight drilling, or setting screws when working on concrete, brick, and masonry. TE 2-A drills anchor holes in concrete from 3/16-3/8 in., and also provides capacity for drilling up to 1 in. holes in wood, 3/8 in. in steel, and up to 5/8 in. in concrete. Compact drill weighs 8.36 lb, and is offered with either 3.0...

Responsible Spill Remediation in the Food & Beverage Industry

There are two major areas in which food & beverage product handling will take place: processing and distribution. As with all product handling scenarios, spills are an inevitable occurrence within both of these spaces.

Walk-Behind Saw cuts concrete and asphalt up to 7 in. deep.

Portable, pneumatic Model CSR 150 features 9.5 hp air motor with gearbox that reduces turning speed from 5,250 to 2,900 rpm to regulate blade speed and increase torque to cut hard materials. Crank handle raises and lowers blade for cutting depths up to 7 in. Saw features 1 in. arbor, blade capacity up to 20 in. diameter, solid rubber casters, pointer to follow scribe line, and Ã-¾ in. water...

Diamond Core Drills are suited for hand-held drilling.

Available in 2- and 3-speed models for hand-held and rig-mounted drilling, Diamond Core Drills consist of electric, hydraulic, and pneumatic tools equipped with safety slip clutch to protect operator in case of jamming. Tools can be used for wet or dry drilling up to 12 in. in dia and feature water swivel with Ã-¾ in. hose connection. Electric hand-held units have thermal overload switch,...

Rotary Hammer features electronic speed control.

Model KHE-D28 D-handle rotary hammer provides consistent speed between load and no-load, making it suitable for through-drilling and anchor setting as well as light chiseling in masonry materials, steel, and wood. The 8.2 A motor provides force of blows of 0-2.5 J at 0-4,600 blows per min, and no-load rpm of 1-1,000. Drilling capacity is 1-1/8 in. in concrete, 1-9/16 in. in wood, and Ã-½ in....

Portable Electric Hacksaw performs on-site pipe cutting.

Model 5 1215 0070, able to cut pipe up to 24 in. OD in one pass, can be used manually or with clamps for pipe or profiles. Weighing 13 lb, saw has 23/8 in. stroke and 100-350 strokes/min variable speed control. It is suited for on-site cutting of pipe, structural steel, or tanks and can be used with heavy-duty saw blades from 8-37 in. long. Saw blade guide holds blade straight, ensuring right...

Insulated Tools are rated for 1,000 Vac live-line use.

Compliant with ASTM F1505-01, S.I.P. 2-color safety-insulated hand tools are impact-resistant and flame-retardant. Line encompasses 850+ hand tools, including ergonomically-designed sockets, ratchets, wrenches, pliers, and complete tool sets. They are designed for facilities or environments where live voltage up to 1,000 Vac or 1,500 Vdc is present. Company also insulates existing tools to meet...

SOIC Adapters upgrade older relays.

Offered with 8 leads, SOIC Adapters are .062 in. thick FR-4 with 1 oz of copper traces on both sides. They are available on .300 in. DIP centers and can be mounted on PCBs with hole diameter of .028 in. Pins are 360 Ã-½ hard brass alloy, and pin plating is 5.08 Ã-µm minimum tin/lead 93/7 over 2.54 Ã-µm minimum nickel. Adapters provide upgrade from older Aromat HB2E relays to...

560 and 572 Series IP67 Waterproof Inline Plug and Socket Connectors with Shock and Vibration Resistance

EDAC's new line of IP67 waterproof plug and socket connectors represent the cutting edge of waterproof connection technology. Part of the 560 and 572 series of connectors, they utilize innovative design concepts to deliver a level of performance and value that is unmatched in the industry. See our video to learn more.